• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.21 no.2
• /
• pp.106-111
• /
• 2011

In this paper, assumed mode method on Euler beam theory is employed and signal distortion is considered to obtain the performances of a MEMS accelerometer which are a sensitivity and measurable frequency range(MFR). Not only the sensitivities and MFR but also the variations of dynamic responses and natural frequencies of the MEMS accelerometer are investigated for several sets of beam properties such as length, width, thickness and Young's modulus. It is stated that the variations of beam properties significantly influence the performances of the MEMS accelerometer and the relationship between sensitivities and MFR is inversely proportional to each other.

• Journal of Welding and Joining
• /
• v.20 no.3
• /
• pp.98-104
• /
• 2002

A study on microstructures of welds for Zircaloy-4 sheath end closure by the resistance upset welding methods was carried out. Two upset welding process variations such as magnetic farce and multi-impulse resistance welding were used. Grain size and microhardness across welds were analysed in terms of welding parameters. Magnetic farce resistance weld with one cycle of unbalanced mode has smaller upset length and $\alpha-grain$ size in heat affected zone than those of multi-impulse resistance weld because of lower heat input and shorter welding time. Heat affected zone formed by two upset resistance welding variations revealed fine Widmanstatten structure or martensitic ${\alpha}'$ structure due to the high heating rate and foster cooling rate. Magnetic force resistance welds showed recrystallized grains before grain growth, whereas multi-impulse resistance welds showed full grain growth.

• Proceedings of the Korean Institute of Communication Sciences Conference
• /
• 1986.04a
• /
• pp.184-188
• /
• 1986

The gain variations of paraboloid reflector antenna with an axially and perpendicularly defocused feed are investigated using the Huygens-Fresnel Principle. The theoretical calculations and the experimental for the reflector antenna with an axially defocused feed are compared. Although there were about 3dB difference between two results in a range from focal point to 2.0 wave-length, we could know that it was property approached to theoretical results. However, when the magnitude of defocusing is increased, the differences are also increased because of the influence by a weak received signal and interference of external noises. In addition, it can be shown that gain variations are acutely decreased more in perpendicular defocusing than in axial defocusing in the paraboloid reflector antenna.

• Journal of Ocean Engineering and Technology
• /
• v.7 no.2
• /
• pp.68-78
• /
• 1993

Fatigue crack shape variation by a residual stress during crack growth and life predition are studied. An analytical method is presented to predict the influence of a residual stress due to heattreatment on crack shape variations. Computer simulation results using this me thod are graphically shown that crack growth rate to surface direction are decreased due to compressive residual stress exisiting in surface area. These results are commpared with experimental results. The fatigue life is also predicted by computer simulation of crack aspect ratio variation which is based on the surface crack length increment per unit cycle calculated from a-N diagram. Predited life is about 12 percent lower than experimental life.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.17 no.9
• /
• pp.2304-2314
• /
• 1993

Natural convective flow and heat transfer in a two-dimensional square enclosure fitted with a horizontal partition are investigated numerically. The enclosure was composed of the lower hot and the upper cold horizontal walls and the adiabatic vertical walls, and a partition was situated perpendicularly at the one vertical insulated wall. The governing equations are solved by using the finite element method with Galerkin method. The computations were carried out with the variations of length, position and thermal conductivity of the partition, and Rayleigh number based on the temperature difference between two horizontal walls and the enclosure height with water(Pr=4.95). As the results, an oscillatory motion of natural convection is resulted in a sudden rise of overall heat transfer, but the increase of length of partition is significantly restrained the increase of Nusselt number. The maximum heat transfer was shown just before the transition of the direction of oscillating flow. An oscillatory motion of flow was perfectly shown the stability with the decrease of the length of partition and Rayleigh number. Also, the heat transfer was raised with the increase of the thermal conductivity in proportion to the increase of the length of partition. The stability and oscillation of flow are affected by the position of partition.

• Korean Journal of Environmental Biology
• /
• v.35 no.1
• /
• pp.64-82
• /
• 2017

Two species of the minuta-subgroup within the oncaeid copepod genus Triconia $B{\ddot{o}}ttger$-Schnack, 1999 collected in the equatorial Pacific Ocean are newly recorded. A female T. minuta (Giesbrecht, 1893 ["1892"]) and both male and female T. umerus ($B{\ddot{o}}ttger$-Schnack and Boxshall, 1990) from the northeast equatorial Pacific are redescribed with the comparison of its morphological details, which differs from previous studies, in terms of the larger body size, the length to width ratio of the genital double-somite, the relative length of the outer basal seta on P5, and the ornamentation of the appendages. The characters, which are used for identification, such as the length ratio of the outer subdistal and outer spine versus the distal spine on P3-P4, and the outer spine length of the middle exopodal segment on P3 and P4 are reported for the first time. Information on the variations in the endopodal spine lengths of swimming legs 2-4 is also provided for T. minuta and T. umerus, with the summary of the wide zoogeographical distribution of these two species.

• Journal of Veterinary Clinics
• /
• v.24 no.4
• /
• pp.584-587
• /
• 2007

The purpose of this study was to estimate the standard of normal spleen size and its variations in relation to age, body weight(BW) and 1st lumbar vertebra($L_1$) length using radiographs. The Maximum transverse length (MTL) and maximum vertical length(MVL) of the spleen were obtained from ventrodorsal abdominal radiographs of 134 dogs which underwent radiography for indications unrelated to splenic disease. Splenic size did not significantly correlated with the age. MTL and MVL increased with BW according to the nonlinear correlation. Also, MTL and MVL increased with $L_1$ length according to the linear correlation.

• Journal of Welding and Joining
• /
• v.16 no.2
• /
• pp.84-92
• /
• 1998

On this study, the variations of hardness and microstructure were observed at he spot-welded part of 5182 alminum alloy sheets with thickness of 1.2 mm. The hardness of spot-welded part of aluminum alloy indicated the lowest value at nugget center. Also, the position where fatigue crack exists was investigated by surveying microstructure of the spot-welded sections. Mean load-deformation diagrams were obtained from static tensile test. Fracture was occurred completely within 5 mm after transforming elastic into plastic area. Fatigue test was stopped when the specimens of fatigue test had the final displacement of 0.2mm and measured fatigue bending angle and crack length. This study utilized them, investigated the relations between fatigue bending angle and fatigue crack length and made a estimation of the fatigue fracture life of resistance spot welded part of 5182 aluminum alloy sheet. The relative equation o fatigue crack length and fatigue failure life can be represented by {TEX}$L_{C}${/TEX}=α{TEX}$N_{f}^ {β}${/TEX}.

• Journal of the Korean Society of Physical Medicine
• /
• v.7 no.1
• /
• pp.95-101
• /
• 2012

Purpose : The purpose of this study was to investigate the variations in gait parameters according to arm swing use in post stroke hemiparesis. Methods : Sixteen patients participated in this study and walked at self-selected speeds on a Rs-scan systems. The were randomly assigned conditions: self-selected arm swing, constraint arm swing, emphasis arm swing. Results : In the comparison of parameters in each trial, both affected step length, non affected step length, affected stride length, non affected stride length, affected single support time, and non affected single support time were significantly increased and double support time was significantly decrease in emphasis arm swing when compared with both self-selected arm swing and constraint arm swing(p<.05). However, Asymmetrical ratio was significantly increased in both emphasis arm swing and self-selected arm swing when compared constraint arm swing(p<.05). Conclusion : Therefore, In this study, gait rehabilitation of patients with hemiplegia depending on what you need to apply the arm swing is considered.

• The Research Journal of the Costume Culture
• /
• v.20 no.3
• /
• pp.309-318
• /
• 2012

This study aimed to find the components of visual image by researching main image-related adjectives applied to high-waist skirts. In addition, it compared and analyzed the differences and mutual influences of visual images according to variations in the waistline and skirt length of high-waist skirts. The researchers made nine high-waist skirts-combinations of three different levels of waistlines and skirt lengths. The test involved 121 people who hold degrees in the field of Clothing and Textiles. The panels tested actual images of all models wearing the high-waist skirts shown on a computer screen. The results of the study are as follows.: Four factors affected the visual image as waist-height and skirt-length changed: attractiveness, upper-body compensation, length compensation, and hips compensation. Among these factors, attractiveness was estimated as the most important factor. The torso and the hip were highlighted as the waistline increased from 3cm to 11cm, due to the optical illusion of a tighter skirt wrapping the bust, waist, and hips. As the waistline increased, the stature and leg length increased, possibly revising the overall appearance. For the skirt length, a length measuring 20cm above the knees, proved to be most attractive. This resulted in elongated height and leg length, and a slimmer overall look.