• 천문학회보
• /
• 제39권2호
• /
• pp.101.1-101.1
• /
• 2014

The fluctuation of VLBI visibility phase can be occurred, predominantly caused by the irregular distribution and motion of water vapor in the atmosphere at high frequencies (>1GHz). This radio-seeing effect shows up on filled-aperture telescopes as an anomalous refraction (AR). This can be shown as if the antenna pointing-offset increases, in other words the apparent displacement of radio sources from its nominal position happens. We carried out the single-dish observations on KVN sites in order to check the effect of AR from 2010 to 2014. Orion KL, U Her, and R Leo were observed with 1second sampling time at 22.235GHz and 43.122GHz simultaneously. Each source was observed with the tracking mode for 30 minutes per a source. We analyzed the structure function, power spectrum and Allan variance of the data according to a day and a night, a season and observatories. Finally, we can infer that the AR effect depends on the atmospheric environment, especially tropospheric turbulence.

• 전기의세계
• /
• 제22권4호
• /
• pp.17-24
• /
• 1973

In the view point of practical engineering the identification problem may be considered as a problem to determine the optimal model in the sense of minimizing a given criterion function using the input-output records of the plant. In the system identification the statistical approach has been known to be very effective when the topological structure of the system and the statistical characteristics of the observation noises are known a priori. But in the practical situation there are many cases when the inforhation about the observation noises or the system noises are not available a priori. Here, the authors propose a new identification method which can be used effectively even in the cases when the variances of observation noises are unknown a priori. In the method, the identification of unknown parameters of a linear diserete system is achieved by minimizing the improved quadratic criterion function which is composed of the term of square equation errors and the term to eliminate the affection of observation noises. The method also gives the estimate of noise variance. Numerical computations for several examples show that the proposed procedure gives satisfactory results even when the short time observation data are provided.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 하계학술대회 논문집
• /
• pp.123-126
• /
• 2002

A proposed multi-layer ceramic (MLC) chip type band-pass filter (BPF) is presented. The MLC chip BPF has the benefits of low cost and small size. The BPF consists of coulped stripline resonators and coupling capacitors. The BPF is designed to have an attenuation pole at below the passband for a receiver band of IMT-2000 handset. The computer-aided design technology is applied for analysis of the BPF frequency characteristics. The passband and attenuation pole depend the coupling between resonators and coupling capacitance. The frequency characterics of the passband and attenuation pole are analysed with the variance of the coupling between resonators and coupling capacitance. An equivalent circuit and structure of MLC chip BPF are proposed. The frequency characteristics of the BPF is well acceptable for IMT-2000 application.

• Smart Structures and Systems
• /
• 제4권4호
• /
• pp.465-492
• /
• 2008

Proper pretest planning is a vital component of any successful vibration test on engineering structures. The most important issue in dynamic testing of many engineering structures is arriving at the number and optimal placement of sensors. The sensors must be placed on the structure in such a way that all the important dynamic behaviour of a structural system is captured during the course of the test with sufficient accuracy so that the information can be effectively utilised for structural parameter identification or health monitoring. Several optimal sensor placement (OSP) techniques are proposed in the literature and each of these methods have been evaluated with respect to a specific problem encountered in various engineering disciplines like aerospace, civil, mechanical engineering, etc. In the present work, we propose to perform a detailed characteristic evaluation of some selective popular OSP techniques with respect to their application to practical civil engineering problems. Numerical experiments carried out in the paper on various practical civil engineering structures indicate that effective independence (EFI) method is more consistent when compared to all other sensor placement techniques.

• 아동학회지
• /
• 제20권2호
• /
• pp.3-19
• /
• 1999

The Revised Classroom Play(RCP) scale was validated for Korean 4th grade students. 104 boys and 80 girls took the translated RCP. Test-retest reliability was established with 41 children after 2 months, and test of criterion-related validation was established by the Social Behavior Scale administered to 71 children. All raw scores were standardized by classroom and sex to adjust for differences in the number of nominators and nominatees. The structure of the RCP resulted in 3 factors, 'sociability-disruptive' and 'shy-isolated', with 28 items similar to the original RCP 3 factors. For criterion-related validity, the correlations between the 3 factors of the RCP and the 3 factors of the Social Behavior Scale were positive. For internal consistencies, Cronbach's ${\alpha}$ of the RCP factors ranged from .77 to .94. Test-retest reliability coefficients ranged from .33 to .51. Analyses of variance revealed good item discrepancies for all 28 items. These results confirm the RCP as a valid and reliable measure of the quality of peer relations.

• 한국간호교육학회지
• /
• 제6권2호
• /
• pp.359-375
• /
• 2000

PBL can be defined as an active, self-directed and student-centered learning, and an opposite way of classroom teacher-centered learning which has been traditional role learning. PBL enables students think more efficiently and effectively when puzzling through the patient problems. The purpose of this study is to find out the perception of student nurse about PBL, the characteristics and the structure of the type for PBL. The research process is as follow : First, the researcher selected 35 statements for PBL with the content analysis of in depth interview and the literature review. Second, the researcher asks 38 student nurse to classify the statement cards. The result of the research is that the type of student nurse's PBL perception is divided into 4 types(Affirmative type, Negative type, Suspicious type, and Preferable type), and the explanative total variance is 44 percent. In relation to this, if PBL well combined and adapted in our traditional curriculum will change our nursing education in better direction.

• 조명전기설비학회논문지
• /
• 제26권7호
• /
• pp.39-44
• /
• 2012

This paper deals with the characteristic analysis of small power brushless DC (BLDC) motor considering the rotor magnet overhang flux. In the driving characteristics analysis using 2D FEA (Finite Element Analysis), the rotor magnet overhang effect can't be considered and it should be neglected. To consider rotor magnet overhang effect, 3D FEA should be required. But 3D FEA requires very long calculation time even though the high specification computer is used. In this paper, the 3D electromagnetic model of BLDC motor is approximated as the 2D electromagnetic model considering overhang effect. In this paper, the concept of overhang coefficient is applied, and the coefficient according to load torque variance is deduced.

• 한국정보통신학회논문지
• /
• 제16권3호
• /
• pp.416-423
• /
• 2012

Ansoft HFSS와 Serenade를 사용하여, 적층형 저역통과필터(LPF)와 RF 다이오드 스위치를 설계하였다. RF diode switch의 등가회로를 참고한 시뮬레이션은 송신모드 (Transmit mode)일 때 다이오드를 인덕터(Inductor)로 등가 회로화 하였고, 수신모드(Receive mode) 일때는 다이오드를 커패시터(Capacitor)로 변환하여 시뮬레이션 하였다. 적측형 RF diode 설계는 소자 와 수축률 변화를 고려하여 수행하였다.

• 대한기계학회논문집
• /
• 제18권2호
• /
• pp.372-379
• /
• 1994

In this study, the describing function is adopted to represent nonlinearity in the system equations. The compliance can be obtained by solving nonlinear simultaneous algebraic quations for multi-degrees-of-freedom system with multinonlinearities. When the technique is applied, the nonlinearity of the system can be identified from the compliance which is obtained from the sinusoidal excitation of the system. By employing the describing function in the Building Block Analysis, we can extensively develop the BBA into investigation of the continuous systems with nonlinearities. The evaluated compliance can quantitatively show the effects of nonlinearity such as the transfer of the natural frequency, the variance of the compliance at the natural frequency, and the jump phenomena which occur during sweeping of the excitation frequency.

• 대한기계학회논문집A
• /
• 제20권1호
• /
• pp.53-67
• /
• 1996

The dynamic characteristics of mechanical structure are strongly affected by the properties of joint parameters. In this study, the test structures are constructed with two beams which are clamped by bolts, and a bolted joint which is modelled as a lumped stiffness element. To idientify the dynamic joint parameters with variance of clamping torque of bolts, the sensitivity analysis and the mode energy analysis methods are investigated experimentally. As a reult of these two methods, stiffnesses of bolted joint are experimentally found to increase as the clamping torque increases. These stiffnesses identified from the sensitivity analysis and the mode energy analysis method have some difference.