• Journal of the Korean Mathematical Society
• /
• v.55 no.4
• /
• pp.939-962
• /
• 2018

In this paper, we show that the commutator of the intrinsic square function with BMO symbols is bounded on the variable exponent Lebesgue spaces $L^{p({\cdot})}({\mathbb{R}}^n)$ applying a generalization of the classical Rubio de Francia extrapolation. As a consequence we further establish its boundedness on the variable exponent Morrey spaces $\mathcal{M_{p({\cdot}),u}$, Morrey-Herz spaces $M{\dot{K}}^{{\alpha}({\cdot}),{\lambda}}_{q,p({\cdot})}({\mathbb{R}}^n)$ and Herz type Hardy spaces $H{\dot{K}}^{{\alpha}({\cdot}),q}_{p({\cdot})}({\mathbb{R}}^n)$, where the exponents ${\alpha}({\cdot})$ and $p({\cdot})$ are variable. Observe that, even when ${\alpha}({\cdot}){\equiv}{\alpha}$ is constant, the corresponding main results are completely new.

• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.93.3-93
• /
• 2001

We propose the cascade PID type fuzzy control method for a good performance such as robustness. The one of proposed method, the first stage have two input variables of an error and a derivative error, and one output variable, and the next stage have two input variables of the output of first stage and an integral error, and one output variable, have two stages. The other, the first stage has one input of an error, and one output variable, and the second stage have two input of the output of first stage and a derivative error, and one output variable, and the third stage have two input of the output of the second stage and an integer error, and one output variable ...

• Journal of Korean Institute of Industrial Engineers
• /
• v.22 no.1
• /
• pp.17-36
• /
• 1996

An economic two-stage screening procedure is presented when both lower and upper specification limits are given on the performance variable. A screening variable which is highly correlated with the performance variable is used first to decide whether an item should be accepted, rejected, or undecided. The performance variable is then used to classify the undecided items. The two variables are assumed to be jointly normally distributed. A cost model is constructed on the basis of six cost components; inspection costs of screening and performance variables and costs caused by type I and type II misclassification errors related with lower and upper specification limits. Optimal cutoff values on the screening variable are determined so that the average outgoing quality exceeds a prespecified level. Solution methods are provided for both known-parameter and unknown-parameter cases.

• Journal of Families and Better Life
• /
• v.19 no.6
• /
• pp.145-155
• /
• 2001

The purposes of this study were first to construct statistical and econometric models based on Amemiya\`s Type I Tobit mainly addressing the issue of statistical efficiency; second to explore income, price, and curvilinear age effects on the explained variable in order to illustrates its statistical marginal effects related to econometric issues; finally to provide invaluable insight for graphical simulations as a new interpretation approach using Tobit analysis. Results indicated that interpretation for the mean marginal effects of three possible cases of dependent variable was more likely to be evident to understand Tobit results compared to conventional analysis only using latent variable, beta. Results also revealed that prediction value of dependent variable can be possibly and easily projected by the independent variable changed whereas only beta value can not illustrate its projection as independent variables'changes.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.15 no.2
• /
• pp.165-174
• /
• 2007

Variable displacement type piston pump uses various controllers for controlling more than one state quantity like pressure, flow, power, and so on. These controllers need the mathematical model closely expressing dynamic behavior of pump for analyzing the stability of control systems which usually use various kinds of state variables. This paper derives the nonlinear mathematical model for variable displacement type piston pump. This model consists of two 1st oder differential equations by the continuity equations and one 2nd oder differential equation by the motion equation. To simplify the model we obtain the linear state variable model by differentiating the three nonlinear equations. And we verify this linearized model by comparison of simulation with experimentation and analyze the stability for the flow/pressure control. Finally this paper suggests the design compensation to ensure the stability of the systems.

• Journal of Drive and Control
• /
• v.11 no.4
• /
• pp.53-60
• /
• 2014

This paper proposes a control scheme to reduce the power consumption of a variable displacement swash-plate type piston pump supplying oil to a valve-controlled hydraulic cylinder at constant pressure. Whenever flow rate demand was absent, the swash plate angle and the pump speed were changed to the minimum values required to compensate for the internal leakage flow. In response to command signals, the pump speed was changed in proportion to the absolute mean value of the speed component for position commands. At the same time, a pressure regulator was activated to maintain constant system pressure by precisely adjusting the pump speed with the swash plate angle fixed at the maximum. The conventional system consisting of a pressure-compensated variable displacement type pump is driven at a constant speed of 1,800rpm. By comparison, computer simulation and experimental results showed that idling power at stand-by status could be reduced by up to 70% by reducing the pump speed from 1,800rpm to 300rpm and the swash plate angle to the minimum.

• Journal of Advanced Marine Engineering and Technology
• /
• v.32 no.1
• /
• pp.147-152
• /
• 2008

This paper has been fabricated the two different type of variable attenuators using a characteristics of a 3 dB directional coupler and pin diodes. One was not analyzed using the conventional even-odd modes but used simple two-port techniques. The resulting scattering parameters described operation characteristics for the general case where the terminating impedances are equal and unequal. After analyzing resistor role of the ${\pi}$ type fixed attenuator. this paper used a pin diode instead of a resistor. The variable attenuators were fabricated using pin diodes for current-controlled attenuation on the coupled ports of a 3 dB branch-line coupler and ${\pi}$ type fixed attenuator. The realized variable attenuators have more than 33 dB attenuation ranges at 2.1 GHz. and the input and output reflection coefficients are less than -13 dB. These results could be applied to mobile communication systems. It can be varied gain of the power amplifier according to change a outdoor environmental temperature and improved linearity.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.42 no.1
• /
• pp.121-132
• /
• 2018

Recent beauty trends focus on suitability to individual features. A personal color system is a recent aesthetic concept that influences color make up and coordination. However, a personal color concept has several weaknesses. For example, type classification is qualitative and not quantitative because its measuring system is a sensory test with no industry standard of personal color system. A quantitative personal color type classification model is the purpose of this study, which can be a solution to above problems. This model is a kind of mapping system in a 3D Cartesian coordinate system which has own axes, Value, Saturation, and Yellowness. The cheek color of the individual sample is also independent variable and personal color type is a dependent variable. In order to construct the model, this study conducted a colorimetric survey on a 993 sampling frequency of Korean women in their 20s and 30s. The significance of this study is as follows. First, through this study, personal color system is established on quantitative color space; in addition, the model has flexibility and scalability because it consisted of independent axis that allows for the inclusion of any other critical variable in the form of variable axis.

• Structural Engineering and Mechanics
• /
• v.77 no.1
• /
• pp.57-74
• /
• 2021

The thermal eigenvalue responses of the graded sandwich shell structure are evaluated numerically under the variable thermal loadings considering the temperature-dependent properties. The polynomial type rule-based sandwich panel model is derived using higher-order type kinematics considering the shear deformation in the framework of the equivalent single-layer theory. The frequency values are computed through an own home-made computer code (MATLAB environment) prepared using the finite element type higher-order formulation. The sandwich face-sheets and the metal core are discretized via isoparametric quadrilateral Lagrangian element. The model convergence is checked by solving the similar type published numerical examples in the open domain and extended for the comparison of natural frequencies to have the final confirmation of the model accuracy. Also, the influence of each variable structural parameter, i.e. the curvature ratios, core-face thickness ratios, end-support conditions, the power-law indices and sandwich types (symmetrical and unsymmetrical) on the thermal frequencies of FG sandwich curved shell panel model. The solutions are helping to bring out the necessary influence of one or more parameters on the frequencies. The effects of individual and the combined parameters as well as the temperature profiles (uniform, linear and nonlinear) are examined through several numerical examples, which affect the structural strength/stiffness values. The present study may help in designing the future graded structures which are under the influence of the variable temperature loading.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.10a
• /
• pp.822-825
• /
• 2004

Continuously variable transmission (CVT) mechanisms considered here is a V-belt drive with two variable-diameter pulleys and effective diameters. One pulley was set by a mechanical link while the other was spring-loaded to provide automatic correspondence. The center distance between the two variable-diameter pulleys was fixed. Experimental studies were executed to analyze efficiencies as change of its speed ratio.