• 한국세라믹학회지
• /
• 제35권12호
• /
• pp.1329-1336
• /
• 1998

A twt -step carbothermal reduction scheme has been employed for the synthesis of SiC whiskers in an Ar or a H2 atmosphere via vapor-solid two-stage and vapor-liquid-solid growth mechanism respectively. It has been shown that the whisker growth proceed through the following reaction mechanism in an Ar at-mosphere : SiO2(S)+C(s)-SiO(v)+CO(v) SiO(v)3CO(v)=SiC(s)whisker+2CO2(v) 2C(s)+2CO2(v)=4CO(v) the third reaction appears to be the rate-controlling reaction since the overall reaction rates are dominated by the carbon which is participated in this reaction. The whisker growth proceeded through the following reaction mechaism in a H2 atmosphere : SiO2(s)+C(s)=SiO(v)+CO(v) 2C(s)+4H2(v)=2CH4(v) SiO(v)+2CH4(v)=SiC(s)whisker+CO(v)+4H2(v) The first reaction appears to be the rate-controlling reaction since the overall reaction rates are enhanced byincreasing the SiO vapor generation rate.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2003년도 추계학술발표강연 및 논문개요집
• /
• pp.116-116
• /
• 2003

Most of all nano-structures, SiC had a high electrical conductivity and mechanical strengths ay high temperatures. So It was considered a useful materials for nanosized device materials and added materials for strength hardening. Much methods were developed for SiC nanowire and nanorods like CVD, carbothermal reduction, Laser ablation and CNT-confined reduction. These methods used the VLS (Vapor-Liquid-Solid) growth mechanism. In these experiments, SiC nanowire was grown by SLS (Sold-Liquid-Solid) growth mechanism used Graphite substrate, And we characterized its microstructure to compare with VLS growth mechanism.

• 마이크로전자및패키징학회지
• /
• 제27권2호
• /
• pp.11-17
• /
• 2020

본 연구에서는 Ag 금속입자가 기능화된 SnO₂ 나노선을 제작 및 저온 NO₂ 가스 센싱 특성을 평가하였다. Vapor-liquid-solid 공법을 이용하여 SnO₂ 나노선을 합성하였고, flame chemical vapour deposition 공법을 이용하여 Ag 금속입자를 SnO₂ 나노선 표면에 기능화하였다. 합성된 Ag 금속입자가 기능화된 SnO₂ 나노선을 이용하여 50℃에서 NO₂ 10 ppm에 대한 가스 센싱 테스트를 진행한 결과, 감응도(R_g/R_a) 1.252를 얻었다. 본 연구를 통하여, 금속입자가 기능화된 나노선을 이용한 저온동작 반도체식 가스센서의 산업 적용을 현실화 할 수 있을 것으로 기대된다.

• 한국방사성폐기물학회:학술대회논문집
• /
• 한국방사성폐기물학회 2019년도 춘계학술논문요약집
• /
• pp.69-69
• /
• 2019

The distillation of liquid cathode is necessary to separate cadmium from the actinide elements in the pyroprocessing since the actinide deposits are dissolved or precipitated in a liquid cathode. It is very important to avoid a splattering of cadmium during evaporation due to the high vapor pressure. Several methods have been proposed to lower the splattering of cadmium during distillation. One of the important methods is an installation of crucible cover on the distillation crucible. A multi-layer porous round cover was proposed to avoid a cadmium splattering in our previous study. In this study, the effect of crucible cover on the cadmium distillation was examined to develop a splatter shield. Various surrogates were used for the actinides in the cadmium. The surrogates such as bismuth, zirconia, and tungsten don't evaporate at the operational temperature of the Cd distiller due to their low vapor pressures. The distillation experiments were carried out in a crucible equipped with cover and in a crucible without cover. About 40 grams of Cd was distilled at a reduced pressure for two hours at various temperatures. The mixture of the cadmium and the surrogate was heated at $470{\sim}620^{\circ}C$. Most of the bismuth remained in the crucible equipped with cover after distillation under $580^{\circ}C$ for two hours, whereas small amount of bismuth decreased in the crucible without cover above $580^{\circ}C$. The liquid bismuth escaped with liquid cadmium drop from the crucible without cover. It seems that the crucible cover played a role to prevent the splash of the liquid cadmium drop. The effect of the cover was not clear for the tungsten or zirconia surrogate since the surrogates remained as a solid powder at the experimental temperature. From the results of this work, it can be concluded that the crucible cover can be used to minimize the deposit loss by prevention of escape of liquid drop from the crucible during distillation of liquid cathode.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제45회 하계 정기학술대회 초록집
• /
• pp.289-289
• /
• 2013

While there are plenty of studies on synthesizing semiconducting germanium nanowires (Ge NWs) by vapor-liquid-solid (VLS) process, it is difficult to inject dopants into them with uniform dopants distribution due to vapor-solid (VS) deposition. In particular, as precursors and dopants such as germane ($GeH_4$), phosphine ($PH_3$) or diborane ($B_2H_6$) incorporate through sidewall of nanowire, it is hard to obtain the structural and electrical uniformity of Ge NWs. Moreover, the drastic tapered structure of Ge NWs is observed when it is synthesized at high temperature over $400^{\circ}C$ because of excessive VS deposition. In 2006, Emanuel Tutuc et al. demonstrated Ge NW pn junction using p-type shell as depleted layer. However, it could not be prevented from undesirable VS deposition and it still kept the tapered structures of Ge NWs as a result. Herein, we adopt $C_2H_2$ gas in order to passivate Ge NWs with carbon sheath, which makes the entire Ge NWs uniform at even higher temperature over $450^{\circ}C$. We can also synthesize non-tapered and uniformly doped Ge NWs, restricting incorporation of excess germanium on the surface. The Ge NWs with carbon sheath are grown via VLS process on a $Si/SiO_2$ substrate coated 2 nm Au film. Thin Au film is thermally evaporated on a $Si/SiO_2$ substrate. The NW is grown flowing $GeH_4$, HCl, $C_2H_2$ and PH3 for n-type, $B_2H_6$ for p-type at a total pressure of 15 Torr and temperatures of $480{\sim}500^{\circ}C$. Scanning electron microscopy (SEM) reveals clear surface of the Ge NWs synthesized at $500^{\circ}C$. Raman spectroscopy peaked at about ~300 $cm^{-1}$ indicates it is comprised of single crystalline germanium in the core of Ge NWs and it is proved to be covered by thin amorphous carbon by two peaks of 1330 $cm^{-1}$ (D-band) and 1590 $cm^{-1}$ (G-band). Furthermore, the electrical performances of Ge NWs doped with boron and phosphorus are measured by field effect transistor (FET) and they shows typical curves of p-type and n-type FET. It is expected to have general potentials for development of logic devices and solar cells using p-type and n-type Ge NWs with carbon sheath.

• 한국진공학회지
• /
• 제16권4호
• /
• pp.279-285
• /
• 2007

나노크기의 Au-Si을 촉매로 급속화학기상증착법을 이용하여 Si(111) 기판에 성장한 Si 나노선의 구조적인 형태 변화과정과 광학적 특성을 연구하였다. 액상 입자인 Au 나노 점은 기상-액상-고상(vapor-liquid-solid mechanism) 성장법에 의한 Si 나노선 형성 과정에서 촉매로 사용되었다 이 액체 상태인 나노점에 1.0Torr 압력과 $500-600^{\circ}C$ 온도 하에서 $SiH_4$와 $H_2$의 혼합가스를 공급하여 Si 나노선을 형성하였다. <111> 방향으로 형성한 Si 나노선의 형태를 전계방출 주사전자현미경(Field Emission Scanning Electron Microscope)으로 관찰하였다. 특히, 대부분의 나노선이 균일한 크기를 가지고 있으며, Si(111) 기판 표면에서 수직하게 정렬된 것을 확인하였다. 형성된 나노선의 크기를 분석한 결과, 직경과 길이가 각각 60nm와 5um의 분포를 가지는 것을 확인 하였다. 고 분해능 투과전자현미경(High Resolution-Transmission Electron Microscope)을 통해 약 3nm의 다결정 산화층으로 둘러 싸여 있는 Si 나노선이 단결정으로 형성된 것을 관찰하였다. 그리고 마이크로 라만 분광(Micro-Raman Scattering) 실험으로 Si 나노선의 광학적 특성을 분석하였다. 라만 측정결과 Si의 광학 포논(Optical Phonon) 신호가 Si 나노선의 영향으로 에너지가 작은 쪽으로 이동하며, Si 포논 신호의 폭이 비대칭적으로 증가하는 것을 확인 하였다.

• 한국태양에너지학회:학술대회논문집
• /
• 한국태양에너지학회 2009년도 춘계학술발표대회 논문집
• /
• pp.155-161
• /
• 2009

Desiccant systems have been proposed as energy saving alternatives to vapor compression air conditioning for handling the latent load. Use of liquid desiccants offers several design and performance advantages over solid desiccants, especially when solar energy is used for regeneration. The liquid desiccants contact the gas inside the packed column and the heat transfer and mass transfer will occur. This proposal is try study the mass transfer and heat transfer inside the packed column of dehumidifier and regenerator systems. And later on, the rates of dehumidification and regeneration that were affected by desiccant flow rates, air temperature and humidity, and desiccant temperature and all that variation will influence the performance of the systems.

• 대한화학회지
• /
• 제8권3호
• /
• pp.125-127
• /
• 1964

고체상태에서 trans-form으로 존재하는 염화에틸렌은 액체로 되면서 그 일부가 gauche-form으로 변한다. H. Eyring 등에 의해서 제안된 액체구조에 관한 이론에 따라서 이 물질에 대한 분배함수를 정하고, 분배함수속에 들어 있는 parameters $E_s$, ${\theta}$, $V_s$ 및 a를 정하였다. 이와 같이 해서 정한 분배함수를 써서 몰부피, 증기압, 한계점 성질, 증발엔트로피 및 표피장력 등을 계산하여 실험치와 비교하였다.

• 대한화학회지
• /
• 제6권1호
• /
• pp.36-46
• /
• 1962

筆者는 週期表 1族에 適用되는 液體金屬의 模型으로서 純粹한 液體金屬은 2原子分子의 單振動子로 構成되면 이 振動子는 自己가 古有하는 싸이트(site)種에 따라 두가지 에너지狀態中 하나를 取하게 된다고 假想함으로써 液體狀態和를 誘導하였다. 이 狀態和食은 本質的으로는 하나의 物質固有의 常數(${\Theta}$)를 內包하고 있으며 液體金屬에 대하여 이 特性値를 줌으로써 여러가지 熱力學的 性質 즉 蒸氣壓, 液體의 엔트로리, 比熱 等을 算出하여 實測値와 比較하여 보았다. 그 結果는 滿足스러운 一致를 보여준다.

• 한국가구학회지
• /
• 제11권2호
• /
• pp.79-84
• /
• 2000

It is well-known fact that dimensional stability of wood is greatly enhanced by acetylation of wood. This dimensional stability results from bulking of the reacted acetate within the cell wall, which reduces further swelling when the modified woods come into contact with water or water vapor. The purpose of this research was to determine the water absorption and dimensional stability of the acetylated solid wood in liquid water and in humidity tests. Beech and red oak were acetylated. Moisture and water absorption of acetylated wood were quite dependent on weight percent gain(WPG). Antiswelling efficiency(ASE) was quite dependent on WPG, but was not dependent on species.