• 제목/요약/키워드: vanadium

검색결과 648건 처리시간 0.026초

V2O3와 CaO의 농도에 따른 5-성분계 석유코크스 슬래그의 점도 변화 (Effect of V2O3 and CaO Concentrations on the Viscosity of 5-Component Petcoke Slag)

  • 양윤정;오명숙
    • 공업화학
    • /
    • 제31권6호
    • /
    • pp.688-696
    • /
    • 2020
  • 가스화 공정에서 원료 회분의 연속적인 제거를 위해 회분 성분에 따른 점도 거동뿐만 아니라, 온도가 낮아지면서 형성되는 결정체가 점도에 미치는 영향이 연구되어야 한다. 본 연구에서는 석유코크스 슬래그의 주성분 중 CaO와 V2O3 성분의 변화에 따른 슬래그의 점도 거동과 결정 분석을 통해 이 두 성분이 석유코크스 슬래그 점도에 미치는 영향을 조사하였다. 각각의 함유량을 변화시키면서 약 1600 ℃부터 약 1100 ℃까지 온도를 낮추며 점도를 측정하였고, 냉각된 시료의 결정상이 분석되었다. 측정된 시료는 대부분 결정형 점도 거동을 보여주었다. V2O3의 농도가 증가할수록 점도는 유리형에서 결정형으로 변화하였고, Tcv도 증가하는 경향을 보여주었다. CaO의 경우 농도가 증가할수록 낮은 점도와 낮은 Tcv를 보여주었다. 기준 시료를 포함한 모든 시료의 상, 중, 하부에서 다른 결정을 볼 수 있었다. 상, 중부에는 anorthite와 Ca-V 상이 관찰되었으면 하부에서는 주로 V2O3 결정과 anorthite이 관찰되었다. 슬래그의 바나듐은 Ca-V상, V-Fe, 용융 슬래그 상을 형성한다. 융점이 낮은 Ca-V 상은 점도를 낮추는데 기여하는 것으로 보인다.

그래핀 기반 광촉매 담지 세라믹필터에서 질소산화물(NOx)의 제거 (Removal of NOx from Graphene based Photocatalyst Ceramic Filter)

  • 김용석;김영호
    • 공업화학
    • /
    • 제33권6호
    • /
    • pp.600-605
    • /
    • 2022
  • V2O5-WO3-TiO2 촉매를 담지하여 그래핀(graphene) 기반 세라믹필터를 제조하였으며, 이를 활용하여 질소산화물(NOx)의 제거실험을 수행하였다. 산화그래핀(graphene oxide, GO)은 흑연(graphite)을 이용하여 Hummer's method에 의해 제조하였고 환원제로 히드라진(N2H4)을 통해 환원 산화그래핀(reduced graphene oxide, rGO)을 제조하였다. 제조된 그래핀을 세라믹필터 표면에 유-무기 하이브리드 원리를 이용하여 코팅하였으며, 여기에 광촉매물질을 담지하였다. 광촉매물질은 바나듐(V), 텅스텐(W), 티타늄(Ti)를 사용하여 sol-gel법에 의해 코팅 후 350 ℃ 소성 공정을 통하여 광촉매담지 세라믹필터를 제조하였다. UV광을 제조된 필터에 조사하여 NOx의 제거 실험을 수행하였으며, NOx의 제거 효율은 기존의 세라믹필터보다 GO 및 rGO가 코팅된 경우가 우수하였다. 이는 코팅된 그래핀에 의한 흡착성의 향상 때문으로 판단되며, 그래핀의 농도가 증가함에 따라 보다 높은 NOx의 제거효율을 확인하였다.

넓은 작동 온도범위를 가지는 V2O5-WO3/TiO2 SCR 촉매 개발을 위한 티타늄 이소프로폭사이드(TTIP) 활용 전략 (Titanium Isopropoxide (TTIP) Treatment Strategy for V2O5-WO3/TiO2 SCR Catalysts with a Wide Operating Temperature)

  • 이재호;조광훈;이금연;임창용;이영세;김태욱
    • 공업화학
    • /
    • 제34권4호
    • /
    • pp.357-364
    • /
    • 2023
  • 선택적 촉매 환원(SCR)은 질소산화물 배출을 줄이는 가장 효과적인 방법이지만, V2O5-WO3/TiO2 촉매가 좁은 작동온도 (300~400℃) 범위를 가지기 때문에, V2O5-WO3/TiO2 촉매의 작동 온도범위가 200~450℃인 새로운 촉매를 개발하였다. SCR 과정에서 생성되는 촉매 독인 황산암모늄은 350℃ 이상으로 가열함으로써 제거할 수 있다. 촉매 활성 부위의 수를 증가시키고 활성 물질의 분산을 촉진하기 위해 TiO2 지지체에 티타늄 이소프로폭사이드(TTIP) 처리를 여러 TTIP/TiO2 질량비로 진행하였다. 그 중 5 wt% TTIP 부하에서 높은 W 분산성으로 인해 열 안정성이 증가하였고 V5+가 형성되어 최적의 성능을 보였다. 5 wt% TTIP 부하로 처리된 촉매를 One-step co-precipitation으로 제조하였을 때 기존의 방법보다 더 나은 V-OH와 W-OH 분산 및 상호작용 향상이 나타나 더 낮은 온도에서 높은 촉매 활성으로 인해 향상된 성능을 보였다. 이를 향후 TTIP를 이용하여 TiO2촉매의 표면을 개선하려는 연구자에게 이해하기 쉽게 설명하고자 하였다.

통전활성소결법으로 제조한 VO2의 금속-절연체 전이 특성에 W와 Mg 첨가가 미치는 영향 (The Effect of Mg/W Addition on the Metal-insulator Transition of VO2 Using Spark Plasma Sintering)

  • 진우찬;김영진;박찬;장혜진
    • 마이크로전자및패키징학회지
    • /
    • 제29권4호
    • /
    • pp.63-69
    • /
    • 2022
  • 이산화 바나듐은 금속-절연체 전이라는 독특한 특성으로 인해 기초적인 소재 연구 및 산업에의 응용을 위한 연구가 꾸준하게 진행되고 있다. 본 연구에서는 통전활성소결법으로 제조한 이산화 바나듐의 금속-절연체 전이 특성에 마그네슘과 텅스텐 첨가가 미치는 영향을 연구하였으며, 덩어리 시편을 대상으로 그 거동을 고찰하였다. 상용 분말과 통전활성소결법을 이용하여 열처리를 진행하여 제작한 시편의 경우 격자 상수의 변화는 크지 않고 이차상이 존재하였으며, 이로 인해 상전이 온도는 64.2-64.6℃에 분포하는 것으로 나타났다. 반면 불순물의 종류와 함량에 따라 전기전도도는 최대 2.4배 증가하거나 최대 57.4배 감소하는 거동을 나타냈다. 열전도도는 불순물의 첨가에 따라 증가하는 거동을 나타냈으며, 상전이 온도 이전에서는 1.8~2.5 W/m·K, 성전이 온도 이후에서는 1.9~2.8 W/m·K의 값을 가졌다. 이러한 물성 변화는 불순물의 첨가로 인한 전하 나르개 농도의 변화, 불순물의 산란중심, 미세구조의 변화 등이 복합적으로 작용한 결과로 해석할 수 있다.

옥천대(沃川帶) 우라늄광층(鑛層)의 구조규제(構造規制) 및 지구화학적(地球化學的) 특성연구(特性硏究) (Lithologic and Structural Controls and Geochemistry of Uranium Deposition in the Ogcheon Black-Slate Formation)

  • 이대성;윤석규;이종혁;김정택
    • 자원환경지질
    • /
    • 제19권spc호
    • /
    • pp.19-41
    • /
    • 1986
  • Structural, radioactive, petrological, petrochemical, mineralogical and stable isotopic study as well as the review of previous studies of the uranium-bearing slates in the Ogcheon sequence were carried out to examine the lithological and structural controls, and geochemical environment in the uranium deposition in the sequence. And the study was extended to the coal-bearing formation (Jangseong Series-Permian) to compare the geochemical and sedimentologic aspects of uranium chemistry between Ogcheon and Hambaegsan areas. The results obtained are as follows: 1. The uranium mineralization occurs in the carbonaceous black slates of the middle to lower Guryongsan formation and its equivalents in the Ogcheon sequence. In general, two or three uranium-bearing carbonaceous beds are found with about 1 to 1.5km stratigraphic interval and they extend from Chungju to Jinsan for 90km in distance, with intermittent igneous intrusions and structural Jisturbances. Average thickness of the beds ranges from 20 to 1,500m. 2. These carbonaceous slate beds were folded by a strong $F_1$-fold and were refolded by subsequent $F_1$-fold, nearly co-axial with the $F_1$, resulting in a repeated occurrence of similar slate. The carbonaceous beds were swelled in hing zones and were shrinked or thined out in limb by the these foldings. Minor faulting and brecciation of the carbonaceous beds were followed causing metamorphism of these beds and secondary migration and alteration of uranium minerals and their close associations. 3. Uranium-rich zones with high radioactive anomalies are found in Chungju, Deogpyong-Yongyuri, MiwonBoun, Daejeon-Geumsan areas in the range of 500~3,700 cps (corresponds to 0.017~0.087%U). These zones continue along strike of the beds for several tens to a few hundred meters but also discontinue with swelling and pinches at places that should be analogously developed toward underground in their vertical extentions. The drilling surveyings in those area, more than 120 holes, indicate that the depth-frequency to uranium rich bed ranging 40~160 meter is greater. 4. The features that higher radioactive anomalies occur particularly from the carbonaceous beds among the argillaceous lithologic units, are well demonstrated on the cross sections of the lithology and radioactive values of the major uranium deposits in the Ogcheon zone. However, one anomalous radioactive zone is found in a l:ornfels bed in Samgoe, near Daejeon city. This is interpreted as a thermal metamorphic effect by which original uranium contents in the underlying black slate were migrated into the hornfels bed. 5. Principal minerals of the uranium-bearing black slates are quartz, sericite, biotite and chlorite, and as to chemical composition of the black slates, $Al_2O_3$ contents appear to be much lower than the average values by its clarke suggesting that the Changri basin has rather proximal to its source area. 6. The uranium-bearing carbonaceous beds contain minor amounts of phosphorite minerals, pyrite, pyrrhotite and other sulfides but not contain iron oxides. Vanadium. Molybdenum, Barium, Nickel, Zirconium, Lead, Cromium and fixed Carbon, and some other heavy metals appear to be positive by correlative with uranium in their concentrations, suggesting a possibility of their genetic relationships. The estimated pH and Eh of the slate suggests an euxenic marine to organic-rich saline water environment during uranium was deposited in the middle part of Ogcheon zone. 7. The Carboniferous shale of Jangseong Series(Sadong Series) of Permian in Hambaegsan area having low radioactivity and in fluvial to beach deposits is entirely different in geochemical property and depositional environment from the middle part of Ogcheon zone, so-called "Pibanryong-Type Ogcheon Zone". 8. Synthesizing various data obtained by several aspects of research on uranium mineralization in the studied sequence, it is concluded that the processes of uranium deposition were incorporated with rich organic precipitation by which soluble uranyl ions, $U{_2}^{+{+}}$ were organochemically complexed and carried down to the pre-Ogcheon sea bottoms formed in transitional environment, from Red Sea type basin to Black Sea type basin. Decomposition of the organic matter under reducing conditions to hydrogen sulfide, which reduced the $UO{_2}^{+2}$ ions to the insoluble uranium dioxide($UO_2$), on the other side the heavy metals are precipitated as sulfides. 9. The EPMA study on the identification of uraninite and others and the genetic interpretation of uranium bearing slates by isotopic values of this work are given separately by Yun, S. in 1984.

  • PDF

Ar/Ar-H2 플라즈마에 의한 V, Ta, B 산화물의 탄소용융환원 및 정련 (A Study on the Carbothermic Reduction and Refining of V, Ta and B Oxides by Ar/Ar-H2 Plasma)

  • 정용석;박병삼;홍진석;배청찬;김문철;백홍구
    • 한국수소및신에너지학회논문집
    • /
    • 제7권1호
    • /
    • pp.81-92
    • /
    • 1996
  • Ar/Ar-$H_{2}$ 플라즈마법으로 V, Ta, B산화물과 금속의 환원 및 정련을 행하였다. 다시말해 Ar 플라즈마에서의 고온환원반응 및 Ar-(20%)$H_{2}$ 플라즈마에서의 정련 반응에 대한 연구를 각각 수행하였다. Ar 플라즈마 환원에 의하여 $C/V_{2}O_{5}$=4.50의 비에서 순도 96wt%의 조금속 Vdmf 얻었고, 바나듐 산화물의 열분해에 의한 $O_{2}$의 손실로 인해 $C/V_{2}O_{5}$=4.50에서 최대환원도가 얻어졌다. Ar-(20%)$H_{2}$ 플라즈마 정련에서는 $C/V_{2}O_{5}$=4.40의 비에서 99.2wt%의 금속 V을 얻었고, 주된 정련반응은 잔류탄소와 잔류산소의 반응으로 판단된다. 금속 Ta은 Ar 플라즈마 환원에 의하여 $C/Ta_{2}O_{5}$=5.10의 비에서 99.8wt%가 얻어졌고, $Ta_{2}O_{5}$의 열분해에 의한 $O_{2}$ 손실은 발생하지 않았다. Ar-(20%)$H_{2}$ 플라즈마 정련시 탈산반응이 탈탄반응보다 현저했으며, $C/Ta_{2}O_{5}$비가 4.50-5.10의 범위에서 99.9wt%의 금속 Ta을 제조하였다. 이 비에서는 탈산반응에 의한 잔류산소의 감소로 Ta외 Vickers 경도가 약 220Hv였다. 한편, Ar 및 Ar-$H_{2}$ 플라즈마에 의한 $B_{2}O_{3}$의 환원에는 C이 환원제로서 적합하지 않았으나, Fe원 소재와 C, $B_{2}O_{3}$ 및 페로보론을 고주파 유도 용해하였을 때 용강중에서의 $B_{2}O_{3}$의 환원으로 Fe-B-Si 합금을 얻었다.

  • PDF

$WO_3/TiO_2$$V_2O_5/TiO_2$ 분말의 합성 및 $NO_x$ 제거 SCR특성 (Preparation of $WO_3/TiO_2$ and $V_2O_5/TiO_2$ powders and their catalytic performances in the SCR of $NO_x$)

  • 이태석;이인규;이병우;신동우
    • 한국결정성장학회지
    • /
    • 제16권5호
    • /
    • pp.216-221
    • /
    • 2006
  • Anatase $TiO_2$$WO_3$$V_2O_5$ 촉매를 첨가하여 SCR(selective catalytic reduction)용 분말을 합성하였으며, 촉매 첨가가 합성분말의 미세구조, 상합성 및 SCR 촉매능에 미치는 영향에 대해 연구하였다. 촉매의 지지체로 사용된 상용 anatase-$TiO_2$에서 rutile 단일상으로의 상전이 온도는 $1200^{\circ}C$이었다. 그러나 $WO_3$를 10wt% 첨가하면 이 상전이 온도가 $900^{\circ}C$로 낮아졌으며, $V_2O_5$를 첨가(5와 10wt%)할 경우 $650^{\circ}C$ 이하로 낮아졌다. $450^{\circ}C$에서 제조된 $WO_3(10wt%)/TiO_2$, SCR 분말은 $350^{\circ}C{\sim}400^{\circ}C$에서 100%에 가까운 우수한 $NO_x$ 변환효율을 보였다. $650^{\circ}C$에서 열처리한 경우, 보다 넓은 $300{\sim}400^{\circ}C$온도영역에서 100%가까운 우수한 촉매능을 보였다. $650^{\circ}C$에서 합성된 $V_2O_5(5wt%)/TiO_2$ 촉매분말은 넓은 온도범위($250^{\circ}C{\sim}350^{\circ}C$)에 걸쳐 100%에 달하는 가장 우수한 $NO_x$ 변환효율을 보였다. $650^{\circ}C$ 합성분말의 경우 10wt%의 $V_2O_5$ 첨가는 5wt% $V_2O_5$ 첨가 때 보다 분말물성과 촉매물성이 저하되었으며, 이는 $V_2O_5$의 높은 반응성으로 인한, 촉매의 입자성장에 따른 비표면적감소 때문으로 해석된다.

제주도 탈염 용암해수 재배로 제조한 브로콜리 추출물의 신경 세포 보호 효과 (Neuroprotective effects of Extract of Broccoli, Cultivated in Desalinated Magma Seawater, on neuron-like SH-SY5Y cells)

  • 이진설;장윤비;최지선;정재준;강승우
    • 한국응용과학기술학회지
    • /
    • 제37권3호
    • /
    • pp.448-462
    • /
    • 2020
  • 식이 영양에 의한 충분한 영양분 섭취는 치매에 의한 뇌 인지 기능의 저하의 위험성을 줄일 수 있는 중요한 수단이다. 설포라판은 뇌 인지 기능 개선효과가 있는 것으로 알려져 있는 영양 성분으로, 설포라판이 다량으로 포함된 브로콜리 추출물은 인지 기능 개선 효과가 좋을 것으로 기대된다. 본 연구에서는 제주도 탈염 용암해수 재배로 제조한 브로콜리 추출물이 뇌 인지 기능 개선 효과를 가지고 있는지 시험하였다. 제주도 용암해수는 유용 미네랄 (아연, 바나듐, 게르마늄)이 풍부해서, 용암 해수에서 재배한 작물은 유용미네랄 함량이 높은 것으로 알려 져 있다. 제주도 탈염 용암 해수를 사용해서 재배한 브로콜리 추출물의 화학 조성 중 설포라판과 글루코라판 성분을 분석하기 위해 LC-Q-orbitrap 질량 분석기를 사용하였고, 설포라판의 정량 분석을 위해 HPLC 를 사용하였다. 브로콜리 추출물의 신경 세포 사멸 억제 효과와 항 염증 효과를 시험하기 위해 SH-SY5Y 세포를 사용한 실험을 수행하였고, 시냅스 가소성 촉진 효과를 시험하기 위해 SH-SY5Y 세포에서 시냅스 가소성 관련 단백질의 발현 변화와 아세틸콜린 분해 효소의 활성 변화를 측정하였다. 이러한 실험들을 수행한 결과 탈염 염지하수로 재배한 브로콜리 추출물은 신경 세포 사멸 억제 효과와 항염증 효과가 있음을 확인 하였고, 시냅스 가소성 관련 단백질 발현을 증가 시키고 아세틸콜린 분해 효소의 활성을 억제해서 시냅스 가소성을 증가 시키는 효과가 있는 것을 확인 하였다. 이상의 결과들은 제주도 탈염 용암해수로 재배한 브로콜리 추출물이 치매에 의한 뇌 인지 기능 저하를 억제하는 좋은 식이 영양분으로 사용될 수 있는 가능성을 제시하였다.