• Title/Summary/Keyword: vanA

Search Result 2,900, Processing Time 0.031 seconds

CRE ECPERIMENT OF KITSAT-1 (우리별 1호에서의 SPACE RADIATION 환경 조사)

  • 신영훈;민경욱;최영완;김성헌
    • Journal of Astronomy and Space Sciences
    • /
    • v.11 no.1
    • /
    • pp.131-145
    • /
    • 1994
  • The Cosmic Ray Experiment (CRE) is one of the modules flown on board the KITSAT-1 satellite and consistes of two sub-systems: the Total Dose Experiment (TDE) and the Cosmic Particl Experiment(CPE). The purpose of CRE is to characterize the space radiation environment as encountered by an Earth-orbiting spacecraft. KITSAT-1 orbit is dominated by the inner Van Allen radiation belt. This region has a large population of high energy protons which contributes significantly to both long-term and transient radiation effects. The data shows that the inner Van Allen radiation belt is very stable and the solar activity influences the CPE, TDE data and SEU(Single Event Upset) rates. The result also shows that much larger high energy particle flux is recorded than the predictions of the CREME code.

  • PDF

Engineering implications of the RC building damages after 2011 Van Earthquakes

  • Ozmen, Hayri Baytan;Inel, Mehmet;Cayci, Bayram Tanik
    • Earthquakes and Structures
    • /
    • v.5 no.3
    • /
    • pp.297-319
    • /
    • 2013
  • Two destructive earthquakes occurred on October 23 and November 9, 2011 in Van province of Turkey. The damage in residential units shows significant deviation from the expectation of decreasing damage with increasing distance to epicenter. The most damaged settlement Ercis has the same distance to the epicenter with Muradiye, where no damage occurred while relatively less damage observed in Van having half distance. These three cities seem to have resembling soil conditions. If the damages are evaluated: joint failures and insufficient lap splice lengths are observed to be the main causes of the total collapses in RC buildings. Additionally, low concrete strength, reinforcement detailing mistakes, soft story, heavy overhang, pounding and short columns are among other damage reasons. Examples of damages due to non-structural elements are also given. Remarkable points about seismic damages are: collapsed buildings with shear-walls, heavily damaged buildings despite adequate concrete strength due to detailing mistakes, undamaged two-story adobe buildings close to totally collapsed RC ones and undamaged structural system in buildings with heavily damaged non-structural elements. On the contrary of the common belief that buildings with shear-walls are immune to total collapse among civil engineers, collapse of Gedikbulak primary school is a noteworthy example.

On the Cost Analysis of Container Physical Distribution System in Pusan Port (부산항 컨테이너 물류 시스템의 비용분석에 관하여)

  • 박창호;이철영
    • Journal of the Korean Institute of Navigation
    • /
    • v.15 no.3
    • /
    • pp.13-24
    • /
    • 1991
  • This paper aims to determining the optimal capacity of Pusan port in view point of Container Physical Distribution cost. It has been established a coast model of the container physical distribution system in Pusan port is composed of 4 sub-systems and in-land transport system. Cargo handling system, transfer & storage system and in-land transport system, and analyzed the cost model of the system. From this analysis, we found that the system had 7 routes including in-land transport by rail or road and coastal transport by feeder ship between Pusan port and cargo owner's door. Though railway transport cost was relatively cheap, but, it was limited to choose railway transport routes due to the introducing of transport cargo allocation practice caused by shortage of railway transport capacity. The physical distribution ost for total import & export container through Pusan port was composed of 4.47% in port entring cost, 12.98% in cargo handling cost, 7.44% in transfer & storage cost and 75.11% in in-land transport cost. Investigation in case of BCTOC verified the results as follows. 1) The optimal level of one time cargo handling was verified 236VAN (377TEU) and annual optimal handling capacity was calculated in 516, 840VAN(826, 944TEU) where berth occupancy is $\rho$=0.6 when regardless of port congestion cost, 2) The optimal level of one time cargo handling was verified 252VAN (403TEU) and annual optimal handling capacity was calculated in 502, 110VAN (803, 376TEU) where berth occupancy is $\rho$=0.58 when considering of port congestion cost.

  • PDF

Implementation of Container Pre-Notification System based on SOAP Message (SOAP 메시지 기반의 컨테이너운송예정정보망 시스템 구축)

  • Jo, Hun Sang;Choi, Jin Young;Cho, Jung Hyun
    • Proceedings of the Korea Information Processing Society Conference
    • /
    • 2012.11a
    • /
    • pp.1673-1676
    • /
    • 2012
  • 국내 주요 항만으로 반입되는 모든 운송사의 수출입 컨테이너는 반드시 항만을 관리하는 터미널 운영사에 해당 컨테이너의 주요 정보를 사전에 통지해야 하며 이를 컨테이너 운송 예정 정보라 부른다. 이는 항만 터미널 운영사가 반입 거점의 컨테이너의 야드 운영과 양적하 작업 계획을 사전에 계획하기 위함이다. 현재 국내 항만 터미널 운영사로 전송되는 컨테이너 반입 예정 정보는 특정 VAN 사업자를 통하여 EDI 로 정보를 송수신한다. 따라서 국내외 운송사들이 수출입 컨테이너를 항만에 반입하기 위해서는 별도의 비용을 지불하고 VAN 사업자의 EDI 서비스를 이용해야 한다. 또한 VAN 사업자의 EDI 시스템에 장애가 발생 할 경우 컨테이너 운송 예정 정보를 전송할 다른 방법은 현재 없는 상황이다. 이에 본 논문에서는 웹 서비스 기반의 SOAP 메시지 전송을 통하여 컨테이너 운송 예정 정보를 송수신 하는 시스템을 시범적으로 구축하고 이를 소개한다. 이를 통해 운송사와 항만 터미널 운영사는 VAN 사의 EDI 시스템 이외에 컨테이너 운송 예정 정보를 송수신하는 예비 전송망을 구축 할 수 있으며 EDI 사용 비용을 줄일 수가 있다.

A Chaotic Underwater Robot (카오스 수중 로봇)

  • Kim, Chun-Suk;Bae, Young-Chul
    • Proceedings of the Korean Institute of Information and Commucation Sciences Conference
    • /
    • v.9 no.1
    • /
    • pp.937-941
    • /
    • 2005
  • In this paper, we propose a chaotic underwater robots that have unstable limit cycles in a chaos trajectory surface with Arnold equation, Chua's equation. We assume all obstacles in the chaos trajectory surface have a Van der Pol equation with an unstable limit cycle. We also show computer simulation results of Arnold equation and Chua's equation chaos trajectories with one or more Van der Pol obstacles

  • PDF

A study on manufacturing methods for flexible microelectronics

  • Sakai, T.;Van Der Horst, A.J.J.;Hovestad, A.J.;Otten, J.G.L.;Van Doremalen, H.C.M.
    • 한국정보디스플레이학회:학술대회논문집
    • /
    • 2007.08b
    • /
    • pp.1711-1714
    • /
    • 2007
  • Various manufacturing methods are analyzed by using manufacturing metrics to validate which method would be applicable to flexible microelectronics. Among others, Roll-to-Roll method is revealed to inherently have an excessive WIP resulting in long cycle time and limited diversity as well as low equipment efficiency.

  • PDF

Estimation of Parameters in Water Retention Function using Volumetric Pressure Plate Extractor (체적기압판 추출장치를 이용한 물보유함수의 매개변수 추정)

  • 윤성용;박재현;김상준
    • Journal of the Korean Society of Groundwater Environment
    • /
    • v.4 no.3
    • /
    • pp.144-152
    • /
    • 1997
  • In this study the experiment on water retention cure was conducted by using a volumetric pressure plate extractor for two different soils (SUS and KUS). When the volumetric pressure plate extractor is used, the volume of water removed from the soil sample at each increasing pressure step can be accurately measured and retained. When pressure values are subsequently reduced, the volume of water that returns to the soil can then also be accurately measured. The hysteresis effect of water retention curve was considered in the experiment. Parameters of water retention function were estimated by fitting experimental data with three proposed equations. Results of estimation showed that parameters of Gardner, Brooks-Corey and van Genuchten equations were found to be associated with air-entry value and width of size distribution. Consequently van Genuchten equation was proved to be best fined through the measured data points.

  • PDF

A Study of Antibiotic Resistance of Enterococci Isolated from Recycling Water of Floor Fountains in Gwangju Area (광주지역내 바닥분수 재이용수에서 분리한 장구균의 항생제 내성 연구)

  • Kim, Yeon-Hee;Song, Hyeong-myeong;Choi, Yeong-Seop;Lee, Yoon-Kook;Park, Jin-Hwan;Kim, Sun-Jung;Kim, Ha-Ram;Kang, Yu-Mi;Bae, Seok-Jin;Cho, Yong-Gwan
    • Journal of Environmental Health Sciences
    • /
    • v.45 no.3
    • /
    • pp.222-230
    • /
    • 2019
  • Objectives: This study aims to evaluate water quality in terms of microorganisms and identify the antibiotic resistance of Enterococci isolated from the recycling water in floor fountains at three parks and one reservoir in the Gwangju area. Methods: Water samples were analyzed for Enterococci using membrane Enterococcus indoxyl ${\beta}$ d glucoside agar (mEI) as described in USEPA Method 1600. The vancomycin-resistant Enterococci with VanA and VanB were identified by PCR. An examination of the antibiotic resistance of isolates against 14 antibiotics was performed by the disk diffusion method. Results: The drinking water quality criterion was exceeded for total colony counts in 68% of all recycling water samples. The average concentration of total califorms and fecal coliforms was 139,325 and 413 CFU/100 mL, respectively. VanA and VanB were not detected from the isolates. We found the antibiotic resistant Enterococci strains to be E. faecalis, E. faecium, E. durans, E. mundtii, E. hirae, and E. thailandicus. The isolates were resistant to Rifampin (50%), Erythromycin (25.8%), Tetracycline (10.2%), Nitrofurantoin (8.1%), Minocycline (3.1%), Erythromycin (1.2%), Penicillin (0.7%), Norfloxacin (0.5%), and Teicoplanin (0.5%) among the 14 antibiotics tested. Antibiotic resistance tests for Enterococci from the recycling water of floor fountains resulted in 30.2% showing resistance to two or more antibiotics. Conclusions: These results showed that the multi-antibiotic resistance of Enterococci, E. coli, and others should be investigated continuously in each environment field.

A Graphical Method for Evaluation of Stages in Shrinkage Cracking Using S-shape Curve Model (S형 곡선 모델을 적용한 수축 균열 단계 평가)

  • Min, Tuk-Ki;Vo, Dai Nhat
    • Journal of the Korean Geotechnical Society
    • /
    • v.24 no.9
    • /
    • pp.41-48
    • /
    • 2008
  • The aim of this study is to present a graphical method in order to evaluate stages in shrinkage cracking. Firstly, the distribution of crack openings is established by sorting the openings of individual cracks in the soil cracking system. Secondly, it is normalized in a range of 0 to 1 to obtain the normalized crack opening distribution. Thirdly, three S-shape curve models introduced by Brooks and Corey(1964), Fredlund and Xing(1994) and van Genuchten(1980) are chosen to fit the normalized crack opening distribution using a curve fitting method. The accuracy of fitting which is described through fitting parameters by the van Genuchten equation is much higher than that by the Brooks and Corey equation and slightly higher than that by the Fredlund and Xing equation; thus the van Genuchten model is used. Finally, the stages of shrinkage cracking are graphically evaluated by drawing three separate straight lines corresponding to three linear parts of the fitted normalized crack opening distribution. The proposed method is tested with different sample thicknesses. The measured data are fitted by the selected model with the fairly high regression coefficient and small root mean square error. The results show graphically that shrinkage cracking comprises three stages; namely, primary, secondary and residual stages. Subsequently, the ranges of evaluated crack opening for each of these stages are presented.

Analytical Solution for Hypersonic Flow on Blunt Bodies (뭉뚝한 물체 주변에 형성된 극초음속유동해석)

  • Baik Doo Sung
    • Journal of computational fluids engineering
    • /
    • v.8 no.4
    • /
    • pp.1-5
    • /
    • 2003
  • A Thin-layer Wavier-Stokes equations are applied for the hypersonic flow over blunt bodies with applications to laminar as well as turbulent flows. The equations are expressed in the forms of flux-vector splitting and explicit algorithm. The upwind schemes of Steger-Warming and Van Leer are investigated to predict accurately the heating loads along the surface of the body. A mixed scheme has been presented for the differencing the convective terms and the mixed scheme is found to be less dissipative producing accurate solutions.