• 한국대기환경학회지
• /
• 제26권4호
• /
• pp.449-452
• /
• 2010

In this article, the performance of the THC analyzer was inspected using two different span gases of methane ($CH_4$) and propane ($C_3H_8$). To explore the effect of standard gas selection, MicroFID system was tested by the following procedures. Initially, the system is spanned by propane gas of 60 ppm (or 180 ppmC). The system is then run against methane standards prepared at 5 different concentrations of 200, 250, 300, 400, and 500 ppm. According to the suggestion of the KMOE's test procedure to use multiplying a factor of 3 (for propane), the resulting THC values derived by methane standards were systematically biased with ~500% error relative to true value. This paper discusses the interpretation procedures to obtain the least biased THC values for a given span set-up.

• 한국의류학회지
• /
• 제27권9_10호
• /
• pp.1060-1071
• /
• 2003

This study was intended to identify customer's response to CRM of fashion business.488 questionnaires were distributed to male and female respondents aged 16 to 55, and then analyzed by descriptive statistics, oneway-ANOVA, chi-square test, and factor analysis. As a result of customer information management, respondents evaluated taste, interest and demographic informations as most valuable. But they did not value personal and credit information. For CRM concept, 4 factors were determined: continuous care and suggestion, particular service to important customer, customer management program development, and customer convenience consideration. For CRM activity, 3 factors were determined: customization, information offering, and programmed service strategies. Respondents were having positive attitude toward CRM concept and activity of fashion business. Among customer loyalty programs, they affected by immediate and direct programs most. The preference of customer contact methods was differentiated by sex and age groups. Males and teenagers preferred e-mail, and females preferred catalog and telephone connection.

• Food Science and Biotechnology
• /
• 제18권1호
• /
• pp.137-142
• /
• 2009

One of the most important aspects of conducting this microbial risk assessment (MRA) is determining the model in microbial behaviors in food systems. However, to fully these modeling, large expenditures or newly laboratory experiments will be spent to do it. To overcome these problems, it has to be considered to develop the new strategies that can be used data in the published literatures. This study is to show whether or not the data set from the published experimental data has more value for modeling for MRA. To illustrate this suggestion, as example of data set, 4 published Salmonella survival in Cheddar cheese reports were used. Finally, using the GInaFiT tool, survival was modeled by nonlinear polynomial regression model describing the effect of temperature on Weibull model parameters. This model used data in the literatures is useful in describing behavior of Salmonella during different time and temperature conditions of cheese ripening.

• 한국지능정보시스템학회:학술대회논문집
• /
• 한국지능정보시스템학회 2002년도 춘계학술대회 논문집
• /
• pp.333-341
• /
• 2002

사례기반추론기법을 통한 유사상품의 탐색과 사용자 요구에 적합한 상품추천을 위해서는 다양한 요구에 부응할 수 있는 사례베이스의 구축이 우선되어야 한다 이에 본 연구에서는 인터넷 쇼핑몰의 상품추천시스템에서 번들상품구성문제를 표현하는데 적합한 사례표현기법을 개발하며, 유1.1사례를 추출하기 위한 유사도 척도의 개발에 연구의 첫 번째 주안점을 둔다. 본 논문에서는 번들상품추천을 위한 사례표현기법으로 속성-값(feature-value) 방식인 프레임(frame) 형식을 사용하고 있다 또한 유사도 측정을 위하여 각 속성(행사, 예산, 참여자 수, 고객 거주지 등)에 대하여 유사도 테이블을 작성하고, 이들 속성들의 가중합계방법을 이용하고 있다.

• Computers and Concrete
• /
• 제16권3호
• /
• pp.449-466
• /
• 2015

This paper aims to study the local bond stress-slip behavior of reinforcing bars embedded in lightweight aggregate concrete (LWAC). The experimental variables of the local bond stress-slip tests include concrete strength (20, 40 and 60 MPa), deformed steel bar size (#4, #6 and #8) and coarse aggregate (normal weight aggregate, reservoir sludge lightweight aggregate and waterworks sludge lightweight aggregate). The test results show that the ultimate bond strength increased with the increase of concrete compressive strength. Moreover, the larger the rib height to the diameter ratio ($h/d_b$) of the deformed steel bars is, the greater the ultimate bond stress is. In addition, the suggestion value of the CEB-FIP Model Code to the LWAC specimen's ultimate bond stress is more conservative than that of the normal weight concrete.

• 한국중재학회지:중재연구
• /
• 제23권1호
• /
• pp.133-152
• /
• 2013

Recently, the United Nations Commission on International Trade Law (UNCITRAL) has made progress toward resolving low value, high volume disputes in international e-commerce. At the Working Group's 26th session, two draft procedural rules were addressed. The first discussed the draft of Article 9, entitled "Decision by a neutral party." This is based on the suggestion in 26th session to have a "two track" system of ODR, one including negotiation, facilitated settlement, and arbitration phrases, and the other not including an arbitration phase. The second draft procedural rule, draft Article 10, regards the language of proceedings. In most cases of international e-commerce, the decision of language of an ODR proceeding is a matter of importance, for the language parties could differ from each other. This paper examines several implications of UNCITRAL for Korea, which has unstable ODR system.

• 기술사
• /
• 제44권4호
• /
• pp.24-27
• /
• 2011

Every government rallies with the private sector to support its traditional cuisines. In Korea, the effort to globalize traditional dishes began with the governments official declaration of "Hansik Globalization" in 2008. Now the mission of globalizing hansik has emerged as one of the most valuable propositions in creating a new value-added rural economy, sharing growth with the tourism industry. The global food industry is reported to be bigger that of the information technology industry by 5.6 times and the automobile industry by 2.5 times as of 2008. And considering that hansik is almost unknown outside of Korea, the potential for growth is huge.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part 1
• /
• pp.334-335
• /
• 2006

WC/WC interface in VC mono-doped WC-10mass%Co submicro-grained hardmetals of $0.5\;{\mu}m$ was investigated together with WC/Co interface by using HRTEM and XMA. The thickness of V-rich layer and the analytical value of V at WC/WC interface were almost the same as those at WC/Co interfaces. These results, etc., suggested that the V-rich layers at both interfaces were not generated by an equilibrium segregation mechanism in the sintering stage, but generated by a preferential precipitation mechanism during the solidification of Co liquid phase in the cooling stage. Based on this suggestion, we succeeded in developing a nano-grained hardmetal with 100 nm $(0.1\;{\mu}m)$.

• 한국수학사학회지
• /
• 제30권1호
• /
• pp.31-50
• /
• 2017

This study analyses on the history of uniform convergence, and discusses its educational implications. First, this study inspects 'overflowing of the Euclidean methodology' which was suggested by Lakatos as a cause of tardy appearance of uniform convergence, and reinterprets that cause in the perspective of 'symbolization'. Second, this study looks into the emergence of uniform convergence of Seidel and Weierstrass in this viewpoint of symbolization. As a result, of analysis, we come to know that the definition of uniform convergence had been changed into the theory of 'domain and graph' from that of 'point and function value' by the location change of the quantifier. As these results, this study puts forward an educational suggestion from an angle of epistemological obstacle, concept definition and concept image.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2006년도 하계학술발표대회 논문집
• /
• pp.283-288
• /
• 2006

Indoor Air Quality Guideline of Kindergarten in korea didn't consider the vulnerable properties of children to indoor air pollutants. For this reason, Suggestion for the IAQ guideline of formaldehyde and minimum ventilation rate was made in this study. Suggested IAQ guidelines for formaldehyde in the respect of children's vulnerable immune system is $30{\mu}g/m^3$ and $50{\mu}g/m^3$, and for the ventilation rate 11.9 ACH, 5.8 ACH, respectively. This value is based only formaldehyde and CO2 concentrations in child-care room of Kindergarten and needed to be verified by further investigations and studies. However it is discovered that lower formaldehyde concentration can do mal-effects to children's health by literature review.