• Health Policy and Management
• /
• v.27 no.1
• /
• pp.88-94
• /
• 2017

The aim of this study was to investigate the current and trend of healthcare status of South Korea compared to Organization for Economic Cooperation and Development (OECD) countries. We used the position value for relative comparison (PARC) method for measuring the healthcare status of South Korea by five parts of healthcare policy (demand, supply, accessibility, quality, and cost). Additionally, we conducted Mann-Kendall test for analyzing the trend of PARC from 2000 to the present. Demand, supply, accessibility, and quality of healthcare of Korea were located upon the average of OECD countries, and showed an increasing trend from 2000 to the present. However, primary care and screening for cervical cancer were placed at a lower level compared the OECD average. In conclusion, the current state of healthcare in Korea seems to be generally beyond the average among OECD countries. However, some parts, including primary care, need to be improved.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.6 no.3
• /
• pp.85-91
• /
• 2007

This study was carried out to minimize the lifting force of a two hinge type stand mechanism. This unit is designed for the display devices in order to enhance the ergonomics for effective height adjustment and maintenance at any preferred position. The unit will be very useful for the mechanism fabricated with a coil spring and disc springs as a torque generator. The maximum and the minimum torque value should be calculated initially for the smooth lift. And the reasonable torque distribution is necessary to prevent any auto lift and auto dropping at any position because the torque generated by coil spring is more sensitive than disc spring in tilting the position. Therefore, the analysis of the coil spring is requisite to issue the specific torque value depending on the distorted angle with securing reliability of a long time storage condition. After the theoretical torque value was calculated, the evaluation was carried out by making a proto-type sample, then distorted angle was updated by experiment. The result of this study can readily be applied to various units for the optimization of the smooth lift.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.06a
• /
• pp.1454-1457
• /
• 2003

This study was carried out to minimize the lifting force of a two hinge type stand mechanism. This unit is designed for the display devices in order to enhance the ergonomics for effective height adjustment and maintenance at any preferred position. The unit will be very useful for the mechanism fabricated with a coil spring and disc springs as a torque generator. The maximum and the minimum torque value should be calculated initially for the smooth lift. And the reasonable torque distribution is necessary to prevent any AUTO LIFT and AUTO Drooping at any position because the torque generated by coil spring is more sensitive than disc spring in tilting the position. Therefore, the analysis of the coil spring is requisite to issue the specific torque value depending on the distorted angle with securing reliability of a long time storage condition. After the theoretical torque value was calculated, the evaluation was carried out by making a proto-type sample, then distorted angle was updated by experiment. The result of this study can readily be applied to various units for the optimization of the smooth lift.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.16 no.5
• /
• pp.126-133
• /
• 2017

This report investigates the stress distribution according to the location and shape change of the circular hole for the lightweight design of the cross beam of a railway passenger car and studies the lightweight design. To design a lightweight cross beam with a circular hole, we selected the non-circular crossbeam as a basic model, examined the stress distribution and displacement by position and determined the location, shape, size and quantity of the hole for light weight. We analyzed the effects of the position and shape of the hole on the maximum equivalent stress and displacement. The influencing factors were set as the design parameters, and the stress value was examined according to the variation of each variable. By considering the stress value according to the change of each variable and selecting the design parameter with the narrowest scattering value of the stress at each position of the hollow cross beam with various hole positions and shapes, we studied a cross beam with a circle hole under identical load condition to have an equal stress distribution to that of a non-circular cross beam.

• Health Policy and Management
• /
• v.28 no.1
• /
• pp.98-103
• /
• 2018

This study aims to evaluate the status of Korean healthcare among Organization for Economic Cooperation and Development countries and to monitor the trend of health care status since 2000. The position value for relative comparison (PARC) index was selected to gauge the level of healthcare status in demand, supply, accessibility, quality, and cost as per healthcare policy aspects. The Mann-Kendall test was conducted to allocate healthcare status of Korea since 2000. The PARC values indicate strength and weakness of Korean healthcare system by the mathematical comparisons. Korea positioned higher in demand, supply, accessibility, and quality. Yet, there are shortages in human resources and primary care. In conclusion, we suggest utilizing this study provides evidence to prioritize health care problems that can lead to establishing healthcare policy.

• Health Policy and Management
• /
• v.32 no.1
• /
• pp.113-121
• /
• 2022

This study aims to compare the healthcare status of South Korea and other member of the Organization for Economic Cooperation and Development (OECD) using the OECD health statistics 2021. We used the position value for relative comparison (PARC) index to measure the five elements of the healthcare system, demand, supply, accessibility, quality, and cost. For the statistical analysis, Mann-Kendall test was performed to examine the trend of the PARC values from 2000 to the most recent year. The results showed that supply, demand, accessibility, and quality were above median than the OECD median and the cost was below median. In sectors such as primary care, health employment and mental health care were below median average. With these result, necessary steps for a sustainable healthcare should be taken into effort by policy makers.

• Wind and Structures
• /
• v.34 no.6
• /
• pp.469-482
• /
• 2022

The generalized extreme value distribution (GEVD) is frequently used to fit the block maximum of environmental parameters such as the annual maximum wind speed. There are several methods for estimating the parameters of the GEV distribution, including the least-squares method (LSM). However, the application of the LSM with the expected order statistics has not been reported. This study fills this gap by proposing a fitting method based on the expected order statistics. The study also proposes a plotting position to approximate the expected order statistics; the proposed plotting position depends on the distribution shape parameter. The use of this approximation for distribution fitting is carried out. Simulation analysis results indicate that the developed fitting procedure based on the expected order statistics or its approximation for GEVD is effective for estimating the distribution parameters and quantiles. The values of the probability plotting correlation coefficient that may be used to test the distributional hypothesis are calculated and presented. The developed fitting method is applied to extreme thunderstorm and non-thunderstorm winds for several major cities in Canada. Also, the implication of using the GEVD and Gumbel distribution to model the extreme wind speed on the structural reliability is presented and elaborated.

• Structural Engineering and Mechanics
• /
• v.84 no.6
• /
• pp.799-811
• /
• 2022

Adhesive bonding has seen rapid development in recent years, with emphasis to composite patch repairing processes of geometric defects in aeronautical structures. However, its use is still limited given its low resistance to climatic conditions and requirement of specialized labor to avoid fabrication induced defects, such as air bubbles, cracks, and cavities. This work aims to numerically analyze, by the finite element method, the failure behavior of a damaged plate, in the form of a bonding defect, and repaired by an adhesively bonded composite patch. The position and size of the defect were studied. The results of the numerical analysis clearly showed that the position of the defect in the adhesive layer has a large effect on the value of J-Integral. The reduction in the value of J-Integral is also related to the composite stacking sequence which, according to the mechanical properties of the ply, provides better load transfer from the plate to the repair piece through the adhesive. In addition, the increase in the applied load significantly affects the value of the J-Integral at the crack tip in the presence of a bonding defect, even for small dimensions, by reducing the load transfer.

• The Journal of the Acoustical Society of Korea
• /
• v.38 no.6
• /
• pp.630-636
• /
• 2019

Passive Ranging Sonar (PRS) is a type of passive sonar consisting of three sub-array on the port and starboard, and has a characteristic of detecting a target and calculating a bearing and a distance. The bearing and distance calculation requires physical sub-array position information, and the bearing and distance accuracy performance are deteriorated when the position information of the sub-array is inaccurate. In particular, it has a greater impact on distance accuracy performance using plus value of two time-delay than a bearing using average value of two time-delay. In order to improve this, a study on sub-array position error estimation and error compensation is needed. In this paper, We estimate the sub-array position error based on enetic algorithm, an optimization search technique, and propose a method to improve the performance of distance accuracy by compensating the time delay error caused by the position error. In addition, we will verify the proposed algorithm and its performance using the sea-going data.

• The Journal of Korean Academic Society of Nursing Education
• /
• v.6 no.2
• /
• pp.199-217
• /
• 2000

This descriptive longitudinal study was done to identify the ethical value of nursing students and to compare the differences of results with one year interval. The data were collected twice in 1999 and in 2000, from the 82 first year and 64 second year nursing students who have been attending at C college in Chonnam province. The analysis of data was done by frequency, mean, paired t-test, t-test, and ANOVA. The results of data were summarized as follows: 1. The total ethical value score of the first year students was 3.48 (maximum : 5) and, one year later, the score was lowered to 3.26. Especially, the degree of their ethical value was significantly decreased in the sub-areas of human-life and nurse-nursing task. 2. The total ethical value score of the second year students was 3.24 and, one year later, the score was increased to 3.39. The degree of their ethical value was significantly increased in the subarea of nurse- client relationship. 3. In the subarea of human-life, the mean score of ethical value was 3.25 and, one year later, the score was 2.95. The degree of ethical value was significantly lowered among the first year students with an utilitarian position. 4. In the subarea of nurse-client relationship, the mean score of ethical value was 3.39 and, one year later, the score was 3.67. The degree of ethical value was significantly increased among the second year students with a deontological position. 5. In the subarea of nurse-nursing task relationship, the mean score of ethical value was 3.38 and, one year later, the mean score was 3.08. The degree of ethical value was significantly decreased among the first year students. 6. In the subarea of nurse-collaboration relationship, the mean score of ethical value was 3.96 and, one year later, the mean score was 4.08 in second year students. There was no statistically significant difference. 7. The ethical values of nursing students were significantly different depending on their religion, length of study, attitude toward nursing and the experience of dying during their clinical practice.