• Steel and Composite Structures
• /
• v.27 no.6
• /
• pp.727-745
• /
• 2018

The design criteria and the corresponding performance levels characterize the response of extended stiffened end-plate beam-to-column joints. In order to guarantee a ductile behavior, hierarchy criteria should be adopted to enforce the plastic deformations in the ductile components of the joint. However, the effectiveness of thesecriteria can be impaired if the actual resistance of the end-plate material largely differs from the design value due to the potential activation of brittle failure modes of the bolt rows (e.g., occurrence of failure mode 3 in the place of mode 1 per bolt row). Also the number and the position of bolt rows directly affect the joint response. The presence of a bolt row in the center of the connection does not improve the strength of the joint under both gravity, wind and seismic loading, but it can modify the damage pattern of ductile connections, reducing the gap opening between the end-plate and the column face. On the other hand, the presence of a central bolt row can influence the capacity of the joint to resist the catenary actions developing under a column loss scenario, thus improving the joint robustness. Aiming at investigating the influence of these features on both the cyclic behavior and the response under column loss, a wide range of finite element analyses (FEAs) were performed and the main results are described and discussed in this paper.

• Investigative Magnetic Resonance Imaging
• /
• v.20 no.2
• /
• pp.88-94
• /
• 2016

Purpose: Fluid-attenuated inversion recovery (FLAIR) imaging can be obtained faster with shorter repletion time (TR), but it gets noisier. We hypothesized that shorter-TR FLAIR obtained at 3 tesla (3T) with a 32-channel coil may be comparable to conventional FLAIR. The aim of this study was to compare the diagnostic value between conventional FLAIR (TR = 9000 ms, FLAIR9000) and shorter-TR FLAIR (TR = 6000 ms, FLAIR6000) at 3T in terms of diffusion-weighted imaging-FLAIR mismatch. Materials and Methods: We recruited 184 patients with acute ischemic stroke (28 patients < 4.5 hours) who had undergone 5-mm diffusion-weighted imaging (DWI) and two successive 5-mm FLAIR images (no gap; in-plane resolution, $0.9{\times}0.9mm$) at 3T with a 32-channel coil. The acquisition times for FLAIR9000 and FLAIR6000 were 108 seconds (generalized autocalibrating partially parallel acquisitions [GRAPPA] = 2) and 60 seconds (GRAPPA = 3), respectively. Two radiologists independently assessed the paired imaging sets (DWI-FLAIR9000 and DWI-FLAIR6000) for the presence of matched hyperintense lesions on each FLAIR imaging. The signal intensity ratios (area of DWI lesion to contralateral normal-appearing region) on both FLAIR imaging sets were compared. Results: DWI-FLAIR9000 mismatch was present in 39 of 184 (21.2%) patients, which was perfectly the same on FLAIR6000. Three of 145 patients (2%) with DWI-matched lesions on FLAIR9000 had discrepancy on FLAIR6000, showing no significant difference (P > 0.05). Interobserver agreement was excellent for both DWI-FLAIR9000 and DWI-FLAIR6000 (k = 0.904 and 0.883, respectively). Between the two FLAIR imaging sets, there was no significant difference of signal intensity ratio (mean, standard deviation; $1.25{\pm}0.20$; $1.24{\pm}0.20$, respectively) (P > 0.05). Conclusion: For the determination of mismatch or match between DWI and FLAIR imaging, there is no significant difference between FLAIR9000 and FLAIR6000 at 3T with a 32-channel coil.

• International Commerce and Information Review
• /
• v.16 no.2
• /
• pp.279-296
• /
• 2014

This study focused on the Technology export of Korea SMEs. Therefore this study made an empirical analysis for investigating the competitiveness of technology export in Korea SMEs and using panel data 2003-2011 of technology trade data between 72 Countries. In particular, the study deduced the correlation between technology export in Korea SMEs using the variables of Gross Domestic Expenditure on R&D and Per capita GDP, distance, population, free-trade index, firm R&D against industry value added of country, Patent grants by country to USA fixed effect model in panel linear regression model. It is found that the Technology export of Korea SMEs made a significant effect on the per-GDP, Gross Domestic Expenditure on R&D. The results suggest that the study should use technology gap variables and the strategy for activating the Technology export of Korea SMEs should be made for future works.

• Journal of The Korean Association of Information Education
• /
• v.10 no.3
• /
• pp.299-306
• /
• 2006

The Ministry of Education and Human Resources Department of Korea have formulated various policy for development of teacher's ICT competence. But most of efforts expended upon ICT utilization currently, emphasize the ability which can handle computer skillfully than the ability for practical use in instruction, so that cannot induce distinct competence according to the duties and operations of teachers. This study aims to make scales for teacher's ability of ICT utilization in education of Korea. For the original purpose of evaluation, this tool made by job analysis and comparative studies with the existing appraisal standards. It can be the standards for evaluation of teacher's wholly duties on ICT applied education and proper self-evaluation tool for improvement of teacher's ability on ICT utilizing instruction. I processed measurement value of participant of Gwangju and Jeollanamdo area in this system and analyzed the level of teacher's abilities using ICT, a sex gap, regional difference, duty position difference and education career difference etc.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.40
• /
• pp.8.1-8.6
• /
• 2018

Background: This study was to evaluate the effect of bone graft procedure on the primary stability of implants installed in fresh sockets and assess the vertical alteration of peri-implant bone radiographically. Methods: Twenty-three implants were inserted in 18 patients immediately after tooth extraction. The horizontal gap between the implant and bony walls of the extraction socket was grafted with xenografts. The implant stability before and after graft procedure was measured by Osstell Mentor as implant stability quotient before bone graft (ISQ bbg) and implant stability quotient after bone graft (ISQ abg). Peri-apical radiographs were taken to measure peri-implant bone change immediately after implant surgery and 12 months after implant placement. Data were analyzed by independent t test; the relationships between stability parameters (insertion torque value (ITV), ISQ abg, and ISQ bbg) and peri-implant bone changes were analyzed according to Pearson correlation coefficients. Results: The increase of ISQ in low primary stability group (LPSG) was 6.87 ± 3.62, which was significantly higher than the increase in high primary stability group (HPSG). A significant correlation between ITV and ISQ bbg (R = 0.606, P = 0.002) was found; however, age and peri-implant bone change were not found significantly related to implant stability parameters. It was presented that there were no significant peri-implant bone changes at 1 year after bone graft surgery. Conclusions: Bone graft procedure is beneficial for increasing the primary stability of immediately placed implants, especially when the ISQ of implants is below 65 and that bone grafts have some effects on peri-implant bone maintenance.

• Bulletin of the Korean Chemical Society
• /
• v.33 no.6
• /
• pp.1861-1866
• /
• 2012

The new semiconducting copolymers with 4,4-dialkyl-$4H$-cyclopenta[2,1-$b$:3,4-$b^{\prime}$]dithiophene and 2,2-dimethyl-$2H$-benzimidazole units were synthesized. The fused aromatic rings, such as cyclopentadithiophene (CPDT) unit, can make the polymer backbone more rigid and coplanar, which induces long conjugation length, narrow band gap, and strong intermolecular ${\pi}-{\pi}$ interaction. The stacking ability was controlled through attaching of linear or branched alkyl side chains. The spectra of PEHCPDTMBI and PHCPDTMBI in the solid films show absorption bands with maximum peaks at 401, 759 and 407, 768 nm, and the absorption onsets at 925 and 954 nm, corresponding to band gaps of 1.34 and 1.30 eV, respectively. The devices comprising PHCPDTMBI with $TiO_X$ showed a $V_{OC}$ of 0.39 V, a $J_{SC}$ of 1.14 $mA/cm^2$, and a $FF$ of 0.34, giving a power conversion efficiency of 0.15%. The PHCPDTMBI with linear alkyl chain on CPDT shows good solubility in organic solvent with higher PCE value than that of PEHCPDTMBI.

• Journal of the Korean Chemical Society
• /
• v.37 no.6
• /
• pp.549-554
• /
• 1993

The titanium oxide thin film was prepared by air oxidation and water vapor oxidation. The photo-electrochemical properties of the electrode was studied in 1M NaOH solution. Titanium dioxide electrodes prepared at higher temperatures were found to have slightly more negative flat band potentials and slightly higher donor densities than their low temperature counterparts. The value of flat band potential ($V_{fb}$) was obtained to be -0.95 ∼ -1.1 V by the measurement of photocurrent and Motte-Schottky plots. The photocurrent of visible region was measured in terms of single crystal filter which entirely blocks the UV radiation. The photo-response of electrodes appeared good with the measument by direct current, when the slit of great resolution was used.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2009.05a
• /
• pp.16.1-16.1
• /
• 2009

We have fabricated solution processed oxide semiconductor active layer for thin film transistors (TFTs). The oxide semiconductor layers were prepared by ink-jet printing the sol-gel precursor solution based on doped-ZnO. Inorganic ZnO-based thin films have drawn significant attention as an active channel layer for TFTs applications alternative to conventional Si-based materials and organic semiconducting materials, due to their wide energy band gap, optical transparency, high mobility, and better stability. However, in spite of such excellent device performances, the fabrication methods of ZnO related oxide active layer involve high cost vacuum processes such as sputtering and pulsed laser deposition. Herein we introduced the ink-jet printing technology to prepare the active layers of oxide semiconductor. Stable sol-gel precursor solutions were obtained by controlling the composition of precursor as well as solvents and stabilizers, and their influences on electrical performance of the transistors were demonstrated by measuring electrical parameters such as off-current, on-current, mobility, and threshold voltage. Microstructure and thermal behavior of the doped ZnO films were investigated by SEM, XRD, and TG/DTA. Furthermore, we studied the influence of the ink-jet printing conditions such as substrate temperature and surface treatment on the microstructure of the ink-jet printed active layers and electrical performance. The mobility value of the device with optimized condition was about 0.1-1.0 $cm^2/Vs$ and the on/off current ratio was about $10^6$. Our investigations demonstrate the feasibility of the ink-jet printed oxide TFTs toward successful application to cost-effective and mass-producible displays.

• Journal of Sasang Constitutional Medicine
• /
• v.5 no.1
• /
• pp.87-104
• /
• 1993

This study was performed to analize the possibility of validation about Questionaire of Sasang constitution Classification which has been made through several stages for the purpose of promoting the objectivity of Sasang constitutional classification. The results of statistical research about the responses data of Sasang Questionaire are as follow: 1. In the case of mutual relation between the items of the QSCC(Questionaire of Sasang Constitution Classification) and 16PF, every item displaced singnificant result.(in male group) 2. In the investigation to classify the score distribution of Sasang items three groups and analize the gap of mean value in each of 16PF, the characters of each Sasang group were turn out as follows: (1) The Taee-Yang group has extrovert and narcissistic inclination. (2) The So-Yang group shows remarkable extrovert inclination. (3) The Tae-Eum group has hidden fear and introvert inclination. (4) The So-Eum group has revealed physical unstability and introvert inclination. 3. The statistical research of female group didn't display any significant result. It will be necessary to analize the respondent shape of female group and introduce new items to coincident with faminine psychology. 4. In the research using 16PF accompany with QSCC in order to classify the Sasang constitution, the accuracy rate of diagnosis showed inspiring elevation. For that reason, it seems to be desirable to introduce some items of 16PF into QSCC. According to above results, although QSCC contains several problems to be solved, its validity was proved, and the analysis of statistics suggests the possibility to step forward by introducing 16PF in some problems of promoting the accuracy of Sasang Constitutional diagnosis, assuring the objectibity of Sasang constitution classification and so on.

• STI Policy Review
• /
• v.3 no.2
• /
• pp.130-151
• /
• 2012

Fraunhofer was founded in 1949 and grew into Europe's largest application-oriented research organization. Fraunhofer currently employs over 20,000 members in Germany, is internationally networked, and manages an R&D budget of over 1,8 Billion Euros per year. An important step for Fraunhofer to become an integral component of the German innovation system was the introduction of the Fraunhofer Model of financing based on a performance-related system of financial management. The underlying model of the allocation and distribution of public funding to Fraunhofer that is subsequently allotted to specific research groups is one of the success factors of Fraunhofer. Fraunhofer is proud of its decentralized organizational model. Fraunhofer is comprised of 60 Institutes in Germany working in different fields, under one legal framework, and with a strong brand value. Every Fraunhofer Institute is affiliated with a German University and every institute director simultaneously holds a chair at the affiliated university. It is a challenge for the headquarter organization to balance the intended competition of individual Fraunhofer Institutes with complementarity cooperation in science among Fraunhofer-Institutes, especially when coming from different knowledge domains; however, this goal results in a significant advantage. The unique strengths of Fraunhofer offer system solutions in a world with increasingly complex R&D challenges. While growing to become the largest organization on Europe to focus on applied research it is the challenge to remain an agile organization that is flexible in organizational structure. Fraunhofer has reached a well-recognized position in the European innovation landscape. It is often referred to by science and governments as a role model for innovation policy and a key element of the latest successes in the German economy that has recovered quicker from the latest economic crisis than most other western economies. The paper explains Fraunhofer as an organizational paradigm and its underlying management model to elaborate on the challenges of managing a research organization. We wish to show how it is possible to transfer the management model and philosophy of Fraunhofer to innovation systems with different framework conditions and challenges. A universal conclusion may be drawn based on the description of Fraunhofer; however, changes in existing structures and innovation systems cannot be implemented over night.