• Restorative Dentistry and Endodontics
• /
• v.24 no.2
• /
• pp.381-391
• /
• 1999

A new 5th generation adhesive system(ONE-STEP) has been supplied which operators can apply to conditioned tooth surfaces by one simplified step. The purpose of this study was to determine whether different methods of adhesive application and various air drying duration after applying adhesive affect the shear bond strength of composite resin to dentin, and to evaluate the adhesive pattern of composite resin and dentin under SEM. Seventy-seven extracted human molar teeth were cleaned and mounted in palstic test tubes. The occlusal dentin surfaces were exposed with Diamond Wheel Saw and smoothed with Lapping and Polishing Machine (South Bay Technology Co., U.S.A.). Teeth were randomly divided into 7 groups (n=11), In experimental A group, adhesive was applied to dentin with agitation for 20 sec. In experimental N-A group, adhesive were continuously applied to dentin for 20 sec. Also control and experimental 1, 2, 3, 4 groups were dried for 10, 0, 5, 20, 30 seconds after applying adhesive, respectively, Adhesives were light cured for 10 sec. A gelatin capsule 5mm in diameter was filled with Aelitefil$^{TM}$ composite resin, placed on the treated dentin surface and light cured for 40 see, from three sides, All specimens were stored in distilled water at room temperature for 24 hours. The shear bond strengths were measured using a universal testing machine(AGS-1000 4D, Japan) at a crosshead speed of 5mm/min. An one-way ANOVA and LSD test were used for statistical analysis of the data. For SEM evaluation, seven specimens were made and sectioned. Representive postfracture and seven specimens were mounted on brass stubs, sputter-coated with gold and observed under SEM. The results were as follows : 1. The shear bond strength of experimental A group which adhesive were applied to dentin with agitation was higher than that of experimental N-A group (continuous application), and there was significant difference between two groups (p<0.01). 2. The interface between composite and dentin according to different application methods showed close adaptation in experimental A group and showed tinny gap in experimental N-A group. 3. The shear bond strength accoding to various air drying duration was the lowest value(7.57${\pm}$2.60 MPa) in experimental 1 group, so there was significant difference between experimental 1 group and other four groups (p<0.05). But there was no significant difference of shear bond strength between four groups (p>0.05). 4. The interface between composite and dentin according to various air drying duration showed close adaptation in control group and tinny gap in experimental 3 and 4 groups. But experimental 1 and 2 groups showed $30{\mu}$ and 6 - $10{\mu}m$ thick gaps, respectively.

• Journal of vocational education research
• /
• v.30 no.4
• /
• pp.113-127
• /
• 2011

The study investigates the type of organizational culture, using the organizational culture assessment instrument(OCAI) developed by Cameron and Quinn based on the competing value model(CVM), and analyzed the gap between current and desirable organizational culture empirically. The analytic results show that while the organizational members prefer the relational organizational culture as a dominant organizational culture on the current level. Also they prefer the relational organizational culture as a desirable organizational culture on the future level. In addition, the diagnosis of organizational culture by the type of status reveals that while the public educational personnel and staff recognized the relational organizational culture as a strong culture, the local public service employee identified the hierarchical culture as a dominant culture on the current level. Those findings suggest the following implications. First, the sustainable management of organizational culture requires the suitable strategic tools. That is to say, they need to introduce and carry out practical strategies to sustain change and control for each type of organizational culture. Second, despite the fact that the balance among four types of organizational culture is needed the strategy to reinforce the dominant culture, considering the types of status and affiliation.

• The Korean Journal of Franchise Management
• /
• v.5 no.1
• /
• pp.109-141
• /
• 2014

Recently, the interests of consumers in firms that implement the social commitment activities have been consistently growing. Consumers' evaluation about the level of corporate social responsibility(CSR) can affect the overall image for product or service of corporation. This recent changes make a marketer to have to consider direct and indirect effects of CSR efforts on the market performance. This phenomena is also found in the franchise industry. The importance of CSR is more critical rather than other industries since each franchisor should care franchisees as well as end users. Franchisors' execution of CSR could increase satisfaction of end user through consonance of activities provided by franchisees. However most franchisor stay in focusing on the traditional CSR activities. Therefore, this study aims to enhance the understanding the CSR in franchise and provide the phase model of CSR development for general firms including franchise. After diagnosis the firms with the proposed model, the study found many franchisors have huge gap between current CSR activities and higher level of CSR policies that franchisor have to make facing. This study call franchisors to reduce this gap by implementing new CSR efforts. If they answer for this calling, franchise industry could leap for making the best practice of creating shared value with other stakeholders.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.18 no.2
• /
• pp.48-56
• /
• 2014

Purpose $^{99m}Tc$-DTPA renal scintigraphy serves as a key indicator to measure a kidney donor's Glomerular Filtration Rate (GFR) and determine the possibility of kidney transplant. The Gates method utilized to measure GFR considers 3 variables of renal depth, injection dose, and net kidney counts. In this research, we seek to compare changes in kidney donors' GFR according to renal depth measurement methods of the 3 variables. Materials and Methods We investigated 32 kidney donors who had visited the hospital from October, 2013 to March, 2014 and received abdominal CT and $^{99m}Tc$-DTPA GFR examination. With the cross-section image of the CT and the lateral image from a gamma camera, we measured the renal depth and compared with renal depth calculation equations-Tonnesen, Taylor, and Itoh methods. Renal depth-specific GFR was calculated by using Xeleris Ver. 2.1220 of GE. Then the results were compared with MDRD (Modification of Diet Renal Disease) GFRs based on serum creatinine level. Results The renal depths measured based on the CT and gamma camera images showed high correlation. Tonessen equation gave the lowest GFR value while the value calculated by using the renal depth of CT image was the highest with a 16.62% gap. MDRD GFR showed no statistically significant difference among values calculated through Taylor, Itoh, CT and gamma camera renal depth application (P>0.05), but exhibited a statistically significant change in the value based on Tonnesen equation (P<0.05). Conclusion This research has found that, in GFR evaluation in kidney donors by utilizing $^{99m}Tc$-DTPA, Tonnesen equation-based Gates method underestimated the value than the MDRD GFR. Therefore, if a MDRD GFR value shows a huge difference from the actual examination value, using an image-based renal depth measurement, instead of Tonnesen equation applied to Gates method, is expected to give an accurate GFR value to kidney donors.

• Journal of Magnetics
• /
• v.20 no.4
• /
• pp.381-386
• /
• 2015

The purpose of this study is to improve diagnostic efficiency of clinical study by setting up guidelines for more precise examination with a comparative analysis of signal intensity and image distortion depending on the location of X axial of object when performing magnetic resonance diffusion weighted imaging (MR DWI) examination. We arranged the self-produced phantom with a 45 mm of interval from the core of 44 regent bottles that have a 16 mm of external diameter and 55 mm of height, and were placed in 4 rows and 11 columns in an acrylic box. We also filled up water and margarine to portrait the fat. We used 3T Skyra and 18 Channel Body array coil. We also obtained the coronal image with the direction of RL (right to left) by using scan slice thinkness 3 mm, slice gap: 0mm, field of view (FOV): $450{\times}450mm^2$, repetition time (TR): 5000 ms, echo time (TE): 73/118 ms, Matrix: $126{\times}126$, slice number: 15, scan time: 9 min 45sec, number of excitations (NEX): 3, phase encoding as a diffusion-weighted imaging parameter. In order to scan, we set b-value to $0s/mm^2$, $400s/mm^2$, and $1,400s/mm^2$, and obtained T2 fat saturation image. Then we did a comparative analysis on the differences between image distortion and signal intensity depending on the location of X axial based on iso-center of patient's table. We used "Image J" as a comparative analysis programme, and used SPSS v18.0 as a statistic programme. There was not much difference between image distortion and signal intensity on fat and water from T2 fat saturation image. But, the average value depends on the location of X axial was statistically significant (p < 0.05). From DWI image, when b-value was 0 and 400, there was no significant difference up to $2^{nd}$ columns right to left from the core of patient's table, however, there was a decline in signal intensity and image distortion from the $3^{rd}$ columns and they started to decrease rapidly at the $4^{th}$ columns. When b-value was 1,400, there was not much difference between the $1^{st}$ row right to left from the core of patient's table, however, image distortion started to appear from the $2^{nd}$ columns with no change in signal intensity, the signal was getting decreased from the $3^{rd}$ columns, and both signal intensity and image distortion started to get decreased rapidly. At this moment, the reagent bottles from outside out of 11 reagent bottles were not verified from the image, and only 9 reagent bottles were verified. However, it was not possible to verify anything from the $5^{th}$ columns. But, the average value depends on the location of X axial was statistically significant. On T2 FS image, there was a significant decline in image distortion and signal intensity over 180mm from the core of patient's table. On diffusion-weighted image, there was a significant decline in image distortion and signal intensity over 90 mm, and they became unverifiable over 180 mm. Therefore, we should make an image that has a diagnostic value from examinations that are hard to locate patient's position.

• Journal of Intelligence and Information Systems
• /
• v.18 no.3
• /
• pp.79-96
• /
• 2012

As the pace of competition dramatically accelerates and the complexity of change grows, a variety of research have been conducted to improve firms' short-term performance and to enhance firms' long-term survival. In particular, researchers and practitioners have paid their attention to identify promising technologies that lead competitive advantage to a firm. Discovery of promising technology depends on how a firm evaluates the value of technologies, thus many evaluating methods have been proposed. Experts' opinion based approaches have been widely accepted to predict the value of technologies. Whereas this approach provides in-depth analysis and ensures validity of analysis results, it is usually cost-and time-ineffective and is limited to qualitative evaluation. Considerable studies attempt to forecast the value of technology by using patent information to overcome the limitation of experts' opinion based approach. Patent based technology evaluation has served as a valuable assessment approach of the technological forecasting because it contains a full and practical description of technology with uniform structure. Furthermore, it provides information that is not divulged in any other sources. Although patent information based approach has contributed to our understanding of prediction of promising technologies, it has some limitations because prediction has been made based on the past patent information, and the interpretations of patent analyses are not consistent. In order to fill this gap, this study proposes a technology forecasting methodology by integrating patent information approach and artificial intelligence method. The methodology consists of three modules : evaluation of technologies promising, implementation of technologies value prediction model, and recommendation of promising technologies. In the first module, technologies promising is evaluated from three different and complementary dimensions; impact, fusion, and diffusion perspectives. The impact of technologies refers to their influence on future technologies development and improvement, and is also clearly associated with their monetary value. The fusion of technologies denotes the extent to which a technology fuses different technologies, and represents the breadth of search underlying the technology. The fusion of technologies can be calculated based on technology or patent, thus this study measures two types of fusion index; fusion index per technology and fusion index per patent. Finally, the diffusion of technologies denotes their degree of applicability across scientific and technological fields. In the same vein, diffusion index per technology and diffusion index per patent are considered respectively. In the second module, technologies value prediction model is implemented using artificial intelligence method. This studies use the values of five indexes (i.e., impact index, fusion index per technology, fusion index per patent, diffusion index per technology and diffusion index per patent) at different time (e.g., t-n, t-n-1, t-n-2, ${\cdots}$) as input variables. The out variables are values of five indexes at time t, which is used for learning. The learning method adopted in this study is backpropagation algorithm. In the third module, this study recommends final promising technologies based on analytic hierarchy process. AHP provides relative importance of each index, leading to final promising index for technology. Applicability of the proposed methodology is tested by using U.S. patents in international patent class G06F (i.e., electronic digital data processing) from 2000 to 2008. The results show that mean absolute error value for prediction produced by the proposed methodology is lower than the value produced by multiple regression analysis in cases of fusion indexes. However, mean absolute error value of the proposed methodology is slightly higher than the value of multiple regression analysis. These unexpected results may be explained, in part, by small number of patents. Since this study only uses patent data in class G06F, number of sample patent data is relatively small, leading to incomplete learning to satisfy complex artificial intelligence structure. In addition, fusion index per technology and impact index are found to be important criteria to predict promising technology. This study attempts to extend the existing knowledge by proposing a new methodology for prediction technology value by integrating patent information analysis and artificial intelligence network. It helps managers who want to technology develop planning and policy maker who want to implement technology policy by providing quantitative prediction methodology. In addition, this study could help other researchers by proving a deeper understanding of the complex technological forecasting field.

• Cartoon and Animation Studies
• /
• s.26
• /
• pp.131-156
• /
• 2012

As the Global Age has arrived, the domain of festivals has expanded to fulfill the role of being not only a tourist attraction but of being a factor that determines the image and identity of cities, and the factor of enhancing the brand value of a particular city is being focused upon. The city of Bucheon, which aims to be a culture oriented city, is attempting to utilize the Bucheon International Comics Festival as a cultural asset for the revitalization of the city. This study has as its purpose the development of an evaluation index model on the brand value of the Bucheon International Comics Festival and research being conducted based on the developed evaluation index model on the awareness level of the citizens of Bucheon of the festival. In regards to this, the theoretical background was examined and the index model was developed based on precedent research. Based on this, a survey of 1,000 citizens of Bucheon was conducted in this study. This study conducted a survey targeting 500 persons, dividing them into 2 groups according to whether they participated in the festival. The survey of this study established 9 evaluation categories for the International Comics Festival evaluation index model which consists of demographic research and participation motivation, value of comics, festival brand awareness and association image, perceived product quality and loyalty for the festival, internationality of the festival and urban activation. Each survey question is composed of 5 points scale measurement. As a result of the survey, 'for an education of children' was the highest for the participation motivation, and 'not knowing of the festival information' was the highest for the reason of not having participated. The industrial value was evaluated as the highest among the value of comics by the both two groups, and it was studied that there was perception gap for the festival according to whether they participated in the festival for each survey question. It was revealed that the level of awareness of the Bucheon International Comics Festival was "normal," the "city revitalization" index and the "value of comics" index were relatively high and the "international character of the festival" index was the lowest. Furthermore, it was shown that there were differences in the awareness of the established categories of the developed evaluation index model based on whether or not there was participation in the festival. This study comprehensively organizes these analytical results and derives implications which can be used as data for the criteria of the development of future strategy for the Bucheon International Comics Festival.

• Journal of agriculture & life science
• /
• v.46 no.1
• /
• pp.133-139
• /
• 2012

The objective of this study was to investigate the relationship between color grade in Korea Institute for Animal Products Quality Evaluation (KAPE) and instrumental color values ($L^*$, $a^*$, $b^*$, ${\Delta}C$ and H) in porcine longissimus dorsi muscle. A total of 538 pigs were selected to classify and to measure the instrumental color values from commercial public slaughter house. All of the instrumental color traits were decreased with increase of color grade (p<0.05). The color grade 1 group had the highest $L^*$ value (65.23) and the color grade 6 group had the lowest $L^*$ value (45.29) among the color grade groups (p<0.05). The color grade had the negative correlation with all the instrumental color traits (p<0.001) and the correlation coefficient between color grade and $L^*$ value was -0.83. In conclusion, instrumental color traits is highly related to color grade, and especially $L^*$ value is an important indicator for both porcine carcass grading and color grading systems in KAPE.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.24 no.6
• /
• pp.229-236
• /
• 2014

A stoichiometric mixture of evaporating materials for $MnAl_2S_4$ single crystal thin films was prepared from horizontal electric furnace. To obtain the single crystal thin films, $MnAl_2S_4$ mixed crystal was deposited on thoroughly etched semi-insulating GaAs(100) substrate by the Hot Wall Epitaxy (HWE) system. The source and substrate temperatures were $630^{\circ}C$ and $410^{\circ}C$, respectively. The crystalline structure of the single crystal thin films was investigated by the photoluminescence and double crystal X-ray diffraction (DCXD). The temperature dependence of the energy band gap of the $MnAl_2S_4$ obtained from the absorption spectra was well described by the Varshni's relation, $E_g(T)=3.7920eV-5.2729{\times}10^{-4}eV/K)T^2/(T+786 K)$. In order to explore the applicability as a photoconductive cell, we measured the sensitivity (${\gamma}$), the ratio of photocurrent to dark current (pc/dc), maximum allowable power dissipation (MAPD) and response time. The results indicated that the photoconductive characteristic were the best for the samples annealed in S vapour compare with in Mn, Al, air and vacuum vapour. Then we obtained the sensitivity of 0.93, the value of pc/dc of $1.10{\times}10^7$, the MAPD of 316 mW, and the rise and decay time of 14.8 ms and 12.1 ms, respectively.

• Korean Journal of Ecology and Environment
• /
• v.42 no.3
• /
• pp.340-349
• /
• 2009

The natural type section of Gap Stream was divided into 7 sites, such as, closed pool, runs, riffle, opened pool, pool, reek-scattered riffle, and Dam-type pool. The ecological characteristics of fish community at each site was examined from April, 2007 to October, 2008. During the survey period, 29 species belonging to 8 families were collected, and Carassius auratus (St. 1), Coreoleuciscus splendidus (St. 3), Acheilognathus lanceolatus (St. 4) and Zacco platypus (St. 2, 5, 6, 7) were characteristic species that represent each habitat. The species of C. auratus preferred physical habitat with sand-bottom pool, moderate depth of 65$\sim$90 cm, and stagnant water. The species of C. splendidus mainly preferred physical habitat with cobbles and pebbles are scattered riffles (St. 3), moderate depth of 65$\sim$90 cm, and flow velocity is 0.14$\sim$0.85 m $sec^{-1}$. It also preferred where concentration of BOD, COD, TN, TP and SS is low and DO's value is high, because the flow velocity is fast. A. lanceolatus preferred where the depth of water is low (3$\sim$44 cm) like an opened pool (St. 4) and the flow velocity is slow (0.01$\sim$0.02 m $sec^{-1}$). Z. platypus dominated in a variety of habitats such as runs (St. 2), pool (St. 5), rock-scattered riffles (St. 6) and D-type pool (St. 7), and it preferred places where flow is abundant and riverbed structure is diverse. On the other hand, 4 individuals of Iksookimia choii appeared at reek-scattered riffles (St. 6). I. choii appeared in this research lived in where the width of river is 24 m, the depth of water is 3$\sim$35 cm and the flow velocity is 0.01$\sim$0.49 m $sec^{-1}$, and riverbed structure was diversely formed with boulder to sand. Also, water temperature, EC, BOD, COD, TN and TP was low, but concentrations of DO and SS were high comparatively. Therefore, it seems that I. choii can live only in physical and chemical environment with similar conditions.