• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.11
• /
• pp.155-167
• /
• 2016

Technology valuation is necessary for determining the feasibility of technology commercialization. However, existing methods focus only on technology evaluation, with limitation in sufficiently reflecting buyer viewpoint. In addition, it causes a gap between estimated value and market value. Therefore, this research suggests a new technology valuation method which focuses on the perspectives of buyers. Technology factors, buyer factors and market factors are first determined and their relationships are analyzed. Second, based on the relationships, profit projections are calculated using the discount cash flow method. Finally, profit projections for each year are discounted. The proposed method was applied using the ubiquitous home network system and audio service and illumination control method and results compared with the value of a technology valuation guide distributed by the Ministry of Trade, Industry and Energy. The technology valuation approach used in this research is quantitative and systematic and can be used as a decision making support tool in technology transfer, reflecting various perspectives of stakeholders.

• Journal of Bio-Environment Control
• /
• v.14 no.1
• /
• pp.7-14
• /
• 2005

This study was conducted to develop a chain conveyor-type, row-spacing system for a plant factory. The developed system was evaluated for its practical use in growing plants. Results are intended to provide technical suggestions on the row spacing for hydroponically grown vegetables in a plant factory. The designed row-spacing system for a plant factory could be adjusted by four stages with a conveying speed range of $5.3\~15.8cm{\cdot}s^{-1}$ and with a row-space range of 10-25cm. The torque of driving shaft was measured with a torque range of 11.7-33.3 N$\cdot$m according as a trough weight changes with a range of $17\~935$ N. A measured value was $5.9\~9.8\;N{\cdot}m$ lower than a theoretical value. Travel reduction rate was shown up $1.6\~1.9\%$. The conveying time of trough was shown up 2.24 seconds in case that the designed value was 2.26 seconds. The system was evaluated to be functioning effectively according to the initial design factors in the test.

• Korean Journal of Digital Imaging in Medicine
• /
• v.11 no.2
• /
• pp.115-119
• /
• 2009

I think this will be valuable reference for assuring consistency and homogeneity of clarity and managing dental radiation equipment by experimentation of dental radiation equipment permanent which based on KS C IEC 61223-3-4 standard and KS C IEC 61223-2-7. Put a dental radiation generator and experiment equipment as source and film(sensor) length within 30 em, place the step-wedge above the film(sensor). Tie up tube voltage 60 kVp, tube current 7 mA and then get an each image through CCD sensor and film by changing the exposure time as 0.12sec, 0.25sec, 0.4sec. Repeat the test 5times as a same method. Measure the concentration of each stage of film image, which gained by experiment, using photometer. And the image that gained by CCD sensor, analyze the pixel value's change by using image J, which is analyzing image program provided by NIH(National Institutes of Health). In case of film, while 0.12sec and 0.25sec show regular rising pattern of density gap as exposure time's increase, 0.4sec shows low rather than 0.12sec and 0.25sec. In case of CCD sensor density test, the result shows opposite pattern of film. This makes me think that pixels of CCD's sensor can have 0~255 value but it becomes saturation if the value is over 255. The way that getting clear reception during decreasing human's exposed radiation is one of maintaining an equipment as a best condition. So we should keeping a dental radiation equipment's condition steadily through cyclic permanent test after factor examination. Even digital equipment doesn't maintain a permanent, it can maintain a clarity by post processing of image so that hard to set it as standard of permanent test. Therefore it would be more increase the accuracy that compare a film as standard image. Thus I consider it will be an important measurement to care for dental radiation equipment and warrant homogeneity, consistency of dental image's clarity through comparing pattern which is the result from factor test against cyclic permanent test.

• Journal of Preventive Medicine and Public Health
• /
• v.27 no.3 s.47
• /
• pp.547-556
• /
• 1994

In order to identify the necessary information of biochemical Indices for renal effect of lead for the early detection in medical surveillance of lead worker, the reference values of urinary N-acetyl-$\beta$-D-glucosaminidase (NAG) activities were studied with 205 office workers in one industrial complex area who were not exposed to lead occupationally. While study variables selected for lead exposure were blood lead (PbB), blood zinc protoporphyrin(ZPP) and $\delta$-aminolevulinic acid (DALA) in urine, those for renal effect were urinary N-acetyl-$\beta$-D-glucosaminidase (NAG), blood urea nitrogen (BUN), serum creatinine(Cr), serum uric acid (Ua), and urinary total protein(U-TP). The results obtained were as follows: 1. The mean values of blood lead, ZPP and DALA in all subjects were $14.39{\pm}4.02{\mu}g/dl,\;21.61{\pm}8.00{\mu}g/dl,\;and\;2.73{\pm}0.90mg/l$ respectively. 2. The mean value of urinary NAG activities in all subjects was $3.51{\pm}2.01U/l$. The mean value of urinary NAG activities, which calculated from NAG activities divided by urinary creatinine concentration (CNAG), was $5.42{\pm}5.53U/g$ creatinine and log-arithmic normal distributed. 3. The reference value of urinary NAG activity was 12.06 U/g creatinine(95% CU=10.57-14.76 U/g creatinine). 4. Logarithmic CNAG(r=0.781 p<0.0l), U-TP(r=0.670 p<0.01) and ZPP(r=0.172 p<0.05) showed statistically significant correlation with CNAG.

• Journal of Korea Trade
• /
• v.25 no.5
• /
• pp.39-57
• /
• 2021

Purpose - This research uses ocean marine insurance (OMI) statistics, international emails, focus-group interviews, and surveys to fill the gap between the theory of behavioral insurance, particularly status quo bias (SQB), and the practice of OMI in Korea. The contractual forms of OMI, the oldest and most globalized form of commercial insurance, were developed in the UK as the Institute Cargo Clauses in 1906 and revised in 1963, 1982, and 2009. SQB has been academically explored, mostly in health insurance and the financial services sector, but never in OMI. Thanks to the availability of OMI statistics in Korea, we can conduct SQB research here for the first time in this field. Design/methodology - We show the existence of SQB in the OMI of Korea through Korean statistics between 2009 and 2018, email correspondence with experts in the UK, Germany, and Japan, focus-group interviews with Korean OMI underwriters, an in-depth interview with one underwriter, and a survey of 15 OMI insureds (company representatives). Findings - We find that Korean foreign traders rely on the old-type OMI contracts developed in 1963, whereas other industrialized countries use the newest type of OMI contract developed in 2009. With a simple loss ratio analysis during 2009-2018, we show that the behavior of insurers has little to do with rational profit maximization and is instead driven by irrational bias, as they forgo the more profitable contracts provided by the new clauses by keeping the old clauses. The consistent addiction to old types of contracts in the OMI market suggests strong SQB among Korean exporters, importers, bankers, or insurers, which we confirmed in our interviews and survey. Originality/value - This research has significant originality and academic value because it reports new findings with crucial implications for the development of efficient trade practices and policy. First, this research is based on actual statistics that have not been used in previous Korean research on OMI. Second, this research shows that all-risk OMI policies provide more value to insureds, in terms of coverage given premium, than partial coverage policies, which differs from arguments previously made in Korea. Third, this research reveals strong SQB in Korea, where foreign trade plays a pivotal role in economic growth. That bias could be attributable to uninformed traders, informed but idle insurers, or conservative bankers. Fourth, to further develop foreign trade, policy initiatives are needed to review the current practices of OMI contracts and move forward with the new contract forms. All of these findings and arguments are both new and important.

• Economic Analysis
• /
• v.27 no.2
• /
• pp.71-123
• /
• 2021

In this study, we present a methodology and model to estimate land prices and the value of land assets in North Korea in the absence of any data about land characteristics from North Korean authorities. Using this framework, we experimentally make market price-based estimates for land assets across the entire urban area of North Korea. First, we estimate the determinants of land prices in South Korea using data on market prices of land from the late 1970s, when it was estimated that the income level gap between South Korea and North Korea wasn't relatively large, and from the early 1980s, when urbanization levels in both of them were similar. Second, we calculate land prices and their relative ratios for each city and urban area in North Korea around 2015 by substituting proxy variables of determinants of land prices derived through a geographic information analysis of North Korea into the function of land prices that we have already estimated. Finally, we estimate the value of land assets in urban areas across North Korea by combining the ratio of housing transaction prices surveyed in several cities in North Korea with the relative prices estimated in this research. As a result, land prices in urban areas in North Korea, looking at the relative ratio of price by city, are estimated to be the highest, at 100.00, in Tongdaewon district of Pyongyang, and to be the lowest, at 1.70, in Phungso county, Ryanggang Province. Meanwhile, the value of land assets in urbanized areas was estimated at $21.6 billion in 2015, which was 1.2 to 1.3 times the GDP of North Korea that year. This ratio is similar to South Korea's in the 1978-1980 period, when the South Korean economy grew at an average rate of 6%. Considering North Korea's growth rate of about 1% in the 2013-2014 period, its ratio of land assets to GDP appears very high.

• Korean Journal of Culture and Social Issue
• /
• v.19 no.2
• /
• pp.87-108
• /
• 2013

With questionnaires conducted for 613 adult Koreans in Seoul, the present study examined how their social features (income level, political party identification, political values, values of capitalism and egalitarianism) exercise influence on attitudes toward income polarization and their evaluation of government policies. Two groups of participants (high vs. low) for each social feature were formed first. Then their attitudes toward income polarization (liberal vs. conservative) and evaluations of policies (liberal vs. conservative) exercised by government (Participatory vs. Practical) were compared. Results indicated that liberal value was strengthened by liberal value, anti-capitalistic, and conservative value was strengthened by egalitarian values, and party identification. It was also found that party identification partial effect on the judgment of policies exercised by Participatory Government. These findings were discussed in terms of their implications for Korean society and measures for communication constructive for settlement of income polarization were suggested.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.37 no.2
• /
• pp.164-168
• /
• 2024

(La_0.7Sr_0.3)(Mn_1-xFe_x)O₃ (LSMFO) (x = 0.03, 0.06, 0.09, 0.12) precursor solution are prepared by sol-gel method. LSMFO thin films are fabricated by the spin-coating method on Pt/Ti/SiO₂/Si substrate, and the sintering temperature and time are 800℃ and 1 hr, respectively. The average thickness of the 6-times coated LSMFO films is about 181 to 190 nm and average grain size is about 18 to 20 nm. As the amount of Fe added in the LSMFO thin film increased, the resistivity decreased, and the TCR and B_25/65-value increased. Electrical resistivity, TCR and B_25/65-value of the (La_0.7Sr_0.3)(Mn_0.88Fe_0.12)O₃ thin film are 0.0136 mΩ-cm, 0.358%/℃, and 328 K at room temperature, respectively. The resistivity properties of LSMFO thin films matched well with Mott's VRH model.

• Journal of Internet Computing and Services
• /
• v.15 no.3
• /
• pp.117-124
• /
• 2014

This paper studies on introduction of online education to provide opportunities for spreading university-level program by analyzing perception of high school students and teachers. The university-level program can be defined as the fulfillment of learning needs and the value offer of excellence education for outstanding high school students who want to improve their potential capabilities. For the study, a survey was conducted at high school students and teachers. As the result of the survey for high school students, the efficiency of education was the most important factor for the university-level program. The order of next important factors was the aid to entering university, the method of education, the satisfaction, and the recommendation of others. The result of high school teacher indicated that the efficiency of education was the most important factor as the high school students. The order of next important factors by high school teachers was the satisfaction, the aid to entering university, and the method of education. An activation of the university-level programs can be spread by analyzing the results of the survey. With the introduction of online education for the university-level program can conclude the guarantee of the right of studying and the reduction of education gap. This paper proposed an online education for the university-level program to guarantee the right of studying and to reduce the education gap.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.08a
• /
• pp.308-309
• /
• 2012

One of the critical issues in the growth of multijunction solar cell is the formation of a highly doped Esaki interband tunnel diode which interconnects unit cells of different energy band gap. Small electrical and optical losses are the requirements of such tunnel diodes [1]. To satisfy these requirements, tens of nanometer thick gallium arsenide (GaAs) can be a proper candidate due to its high carrier concentration in low energy band gap. To obtain highly doped GaAs in molecular beam epitaxy, the temperatures of Si Knudsen cell (K-cell) for n-type GaAs and Be K-cell for p-type GaAs were controlled during GaAs epitaxial growth, and the growth rate is set to 1.75 A/s. As a result, the doping concentration of p-type and n-type GaAs increased up to $4.7{\times}10^{19}cm^{-3}$ and $6.2{\times}10^{18}cm^{-3}$, respectively. However, the obtained n-type doping concentration is not sufficient to form a properly operating tunnel diode which requires a doping concentration close to $1.0{\times}10^{19}cm^{-3}$ [2]. To enhance the n-type doping concentration, n-doped GaAs samples were grown with a lower growth rate ranging from 0.318 to 1.123 A/s at a Si K-cell temperature of $1,180^{\circ}C$. As shown in Fig. 1, the n-type doping concentration was increased to $7.7{\times}10^{18}cm^{-3}$ when the growth rate was decreased to 0.318 A/s. The p-type doping concentration also increased to $4.1{\times}10^{19}cm^{-3}$ with the decrease of growth rate to 0.318 A/s. Additionally, bulk resistance was also decreased in both the grown samples. However, a transmission line measurement performed on the n-type GaAs sample grown at the rate of 0.318 A/s showed an increased specific contact resistance of $6.62{\times}10^{-4}{\Omega}{\cdot}cm^{-2}$. This high value of contact resistance is not suitable for forming contacts and interfaces. The increased resistance is attributed to the excessively incorporated dopant during low growth rate. Further studies need to be carried out to evaluate the effect of excess dopants on the operation of tunnel diode.