• Journal of Marine Bioscience and Biotechnology
• /
• v.14 no.2
• /
• pp.124-132
• /
• 2022

By-products from fisheries produced in Korea are of the same industrial material as imported raw materials and are valuable resources for marine bioindustries. Securing raw materials for the mass production of functional materials is one of the main objectives for marine bioindustrial development. The use of fishery by-products as raw materials is anticipated to increase rapidly as the biomarket is growing into a promising industry. In this study, data were acquired from an open-source environment to perform exploratory data analysis, and various visualization methods were used to compare fishery production to the production of marine processed products in the year 2020. This study suggested that the amount of seafood processing, types of processing items, and areas where fishery processing residue is generated, should be able to secure hygienic raw material supply in large quantities. Thus far, it has been found that the Gyeonggi-do and Busan province, where HACCP-certified processing facilities are concentrated, and the local government Seafood Cluster and the Smart Aquaculture Cluster are at the forefront of stable, mass production of raw materials.

• Corrosion Science and Technology
• /
• v.2 no.1
• /
• pp.1-6
• /
• 2003

A comprehensive coverage of corrosion in batteries is rendered difficult by the wide choice of materials, environments and physical features as obtained in practical settings. Understanding of the complex processes that occur in these electrochemical systems gets clearer as new theoretical approaches backed by sophisticated analytical and characterization techniques continue to provide valuable insights which aid in controlling/mitigating wasteful corrosion reactions which affect battery shelf-life, cycle life, rate capability and capacity. In the light of the above, I limit myself to a discussion on corrosion aspects in representative system such as conventional Leclanche, lead-acid battery and magnesium batteries, and advanced lithium systems.

• Proceedings of the Korean Vacuum Society Conference
• /
• 1998.02a
• /
• pp.19-19
• /
• 1998

Scanning pprobe Microscoppy (SppM) is a ppowerful surface chracterization technology which can measure not only surface toppograpphy but also various ppropperties of the sampple with unpprecedented sensitivity and sppatial resolution. Recent developpment of electrostatic force microscoppe (EFM) and scanning cappacitance microscoppe (SCM) allows us to measure surface ppotential distribution and cappacitance variation n semiconductor devices. The cappacitance image pprovide us valuable information on carrier density and dopping pprofile.

• Korean Journal of Materials Research
• /
• v.22 no.1
• /
• pp.29-34
• /
• 2012

The hydrogen embrittlement of high strength steel for automobiles was evaluated by small punch (SP) test. The test specimens were fabricated to be 5 series, having various chemical compositions according to the processes of heat treatment and working. Hydrogen charging was electrochemically conducted for each specimen with varying of current density and charging time. It was shown that the SP energy and the maximum load decreased with increasing hydrogen charging time in every specimen. SEM investigation results for the hydrogen containing samples showed that the fracture behavior was a mixed fracture mode having 50% dimples and 50% cleavages. However, the fracture mode of specimens with charging hydrogen changed gradually to the brittle fracture mode, compared to the mode of other materials. All sizes and numbers of dimples decreased with increasing hydrogen charging time. These results indicate that hydrogen embrittlement is the major cause of fracture for high strength steels for automobiles; also, it is shown that the small punch test is a valuable test method for hydrogen embrittlement of high strength sheet steels for automobiles.

• Korean Journal of Materials Research
• /
• v.27 no.11
• /
• pp.636-642
• /
• 2017

In the present study the microstructure of low-carbon steels fabricated by controlled rolling and accelerated cooling processes was characterized and identified based on various microstructure analysis methods including optical and scanning electron microscopy, and electron backscatter diffraction(EBSD). Although low-carbon steels are usually composed of ${\alpha}-ferrite$ and cementite($Fe_3C$) phases, they can have complex microstructures consisting of ferrites with different size, morphology, and dislocation density, and secondary phases dependent on rolling and accelerated cooling conditions. The microstructure of low-carbon steels investigated in this study was basically classified into polygonal ferrite, acicular ferrite, granular bainite, and bainitic ferrite based on the inverse pole figure, image quality, grain boundary, kernel average misorientation(KAM), and grain orientation spread(GOS) maps, obtained from EBSD analysis. From these results, it can be said that the EBSD analysis provides a valuable tool to identify and quantify the complex microstructure of low-carbon steels fabricated by controlled rolling and accelerated cooling processes.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2000.04a
• /
• pp.405-410
• /
• 2000

Multi-level (macro-level, meso-level, and micro-level) mechanism of prefinitely strained concrete materials os studied The multi-level analysis explains the additional quasibrittle concrete material ductility that comes from lateral confinement and their multi-level interaction mechanisms. The so-called "upgraded tube-squash test" is used to achieve 50% axial strain and over 70 degree of deviatoric strain of quasibrittle concrete materials under extremely high pressure without producing visible cracks. In the micro-level analysis, the variations of hydration rte, micropores, and hydrate phased are analyzed. In the meso-level analysis, mesocracks (the initial invisible cracks) at the interfaces between aggregates and cement paste matrices are studied. The high confining effect in the specimen on the meso-level cracks is also studied. In the macro-level analysis, the physical behavior of prefinitely strained concrete materials is studied. The co-relationships of the results from the three distinct levels of analyses based in various prestraining (0%, 15%, 35%, and 50%) are studied. For the extremely deformed or strained concrete problems, multi-level analysis will be used to explain the unclear and unstudied mechanism of concrete materials, The multi-level analysis can provide us with valuable insights that can explain the additional ductility and confining effect in concrete. concrete.

• Proceedings of the Korean Institute of Resources Recycling Conference
• /
• 2005.05a
• /
• pp.214-223
• /
• 2005

In order to recover valuable metals from fine-grained electronic waste, bioleaching of Cu, Zn, Al, Co, Ni, Sn and Pb were carried out using Aspergillus niger as a leaching microorganism in a shaking flask. Aspergillus niger was able to grow in tile presence of electronic scrap. The formation of organic acids(citric and oxalic acid) from Aspergillus niger caused the mobilization of metals from waste electronic scrap. In a preliminary study, in order to obtain the data on the leaching of Cu, Zn, Al, Co and Ni, the metal leaching behaviours were accomplished using Organic acid(Citric acid and Oxalic acid) instead of Aspergillus niger. At the electronic scrap concentration of 50g/L, Aspergillus niger were able to leach more than 95% of the available Cu, Co. But Al, Zn, Pband Sn were able to leach about 15-35%. Ni and Fe were detected in the leachate less than 10%.

• Korean Journal of Materials Research
• /
• v.27 no.12
• /
• pp.672-678
• /
• 2017

In the production of zirconium cladding tube, a pickling acid solution is used to remove surface contaminants, which generates tons of pickling acid waste. The waste pickling solution is a valuable resource of Hf-free Zr. Many studies have investigated separating the Hf-free Zr source from the waste pickling acid. The results showed that $Ba_2ZrF_8$ precipitates prepared from the waste pickling acid were useful as an electrolyte for the electrorefining of Zr in molten salt. In the present work, electrorefining was performed in a $Ba_2ZrF_8-LiF$ binary electrolyte to recover Zr from a Hf-free CuZr ingot anode prepared by electroreduction. Before electrorefining, two pretreatments are performed. First, electrolyte melting was carried out to determine the eutectic temperature, and second, the electrolyte was treated to eliminate impurities, mainly hydride. After electrorefining, the cathode deposits were analyzed by $O_2$ gas analyzer and SEM-EDX to explore the possibility of recovering nuclear-grade Zr metal. Moreover, the anode was analyzed by SEM-EDX to determine the Zr dissolution depth.

• Korean Journal of Materials Research
• /
• v.32 no.1
• /
• pp.30-35
• /
• 2022

The development of advanced materials to improve the efficiency of photoelectrochemical (PEC) water splitting paves the way for widespread renewable energy technologies. Efficient photoanodes with strong absorbance in visible light increases the effectiveness of solar energy conversion systems. MoS₂ in a two-dimensional semiconductor that has excellent absorption performance in visible light and high catalytic activity, showing considerable potential as an agent of PEC water splitting. In this study, we successfully modulated the MoS₂ morphology on indium tin oxide substrate by using the metalorganic chemical vapor deposition method, and applied the PEC application. The PEC photocurrent of the vertically grown MoS₂ nanosheet structure significantly increased relative to that of MoS₂ nanoparticles because of the efficient transfer of charge carriers and high-density active sites. The enhanced photocurrent was attributed to the efficient charge separation and improved light absorption of the MoS₂ nanosheet structure. Meanwhile, the photocurrent property of thick nanosheets decreased because of the limit imposed by the diffusion lengths of carriers. This study proposes a valuable photoelectrode design with suitable nanosheet morphology for efficient PEC water splitting.

• Journal of Korea Trade
• /
• v.24 no.3
• /
• pp.55-72
• /
• 2020

Purpose - In this paper, we provide recommendations for Korea's long-term direction and strategic measures to attract inward foreign direct investment (FDI) in response to Japan's export regulations. In doing so, we analyze the current situation and characteristics of trade between Korea and Japan, focusing on the parts and materials industry, which is particularly affected by Japan's trade regulations. Design/methodology - Based on the analysis of five successful inward FDI cases (e.g. Toray, IGK, Delkor, GlobalWafers, DuPont) and statistic trend review in the parts and materials industry, we consider various factors pertaining to successful inward FDI in Korea and propose valuable investment attraction strategies. Findings - For a successful investment attraction strategy, we studied some statistical trends in the internal and external environments of the parts and materials industry and successful investment attraction cases in Korea. We have found that in order to increase the probability of success in attracting investment, we need a mid-to long-term strategy considering multiple factors such as "Production-oriented, Demand-linked, Global Value Chain (VGC) linked, and Policy-linked investment attraction." Originality/value - We suggest several specific measures and important strategic implications for the Korean government and firm's managers to attract inward FDI successfully.