• Journal of Biosystems Engineering
• /
• 제28권6호
• /
• pp.525-530
• /
• 2003

This study was carried out to develop a vacuum nozzle seeder for the automation of large seeds sowing of fruit vegetables and rootstocks. Moreover, the seeding efficiency was examined to find the optimum operating condition considering high precision seeding. The important operating factors for high seeding rate were typically nozzle diameter and absorbing vacuum pressure. The optimum nozzle diameters were found 1.5, 1.5 and 2.0 mm for Chambak, Tuktozwa and Hukjong while the optimum vacuum pressures were 8.0㎪, 10.6㎪ and 5.3㎪, respectively. Under the optimum operating condition, the results indicated that the maximum seeding rates were 97.6％, 98.8％ and 97.6％ respectively for Chambak Tuktozwa and Hukjong. The vibrating acceleration of the hopper did not make any significant effects on the seeding rate when the vacuum pressure reached 8.0㎪ and the sowing rate became higher with lighter seed. As the seed became heavier, the larger diameter of nozzle was recommended 1.5mm of the nozzle diameter was found to be applied for the experimental seeds. The vacuum pressure was also found 8.0㎪ - 13.3㎪ at that time.

• 한국지반공학회논문집
• /
• 제37권4호
• /
• pp.27-37
• /
• 2021

개별진공압밀공법을 적용한 연약점토 지반의 압밀거동을 분석하기 위하여 Plaxis 2D를 이용하여 유한요소해석을 수행하였다. 진공압을 묘사하기 위한 세부적인 방법을 unit-cell 해석 결과와 함께 제시하고, 실제 시공사례를 모델링하여 수치해석결과와 현장계측결과를 비교해봄으로써 개별진공압밀공법이 적용된 연약지반의 압밀거동을 예측하기 위한 Plaxis 2D의 사용 가능성 검토와 해석기법을 제시한다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 1995년도 제9회 학술발표회 논문개요집
• /
• pp.114-114
• /
• 1995

• Geomechanics and Engineering
• /
• 제24권2호
• /
• pp.129-141
• /
• 2021

The vacuum preloading method has been used in many countries for soil improvement and land reclamation. However, the treatment time is long and the improvement effect is poor for the straight-line vacuum preloading method. To alleviate such problems, a novel combined air booster and straight-line vacuum preloading method for shallow ground treatment is proposed in this study. Two types of traditional vacuum preloading and combined air booster and straight-line vacuum preloading tests were conducted and monitored in the field. In both tests, the depth of prefabricated vertical drains (PVDs) is 4.5m, the distance between PVDs is 0.8m, and the vacuum preloading time is 60 days. The prominent difference between the two methods is when the preloading time is 45 days, the injection pressure of 250 kPa is adopted for combined air booster and straight-line vacuum preloading test to inject air into the ground. Based on the monitoring data, this paper systematically studied the mechanical parameters, hydraulic conductivity, pore water pressure, settlement and subsoil bearing capacity, as determined by the vane shear strength, to demonstrate that the air-pressurizing system can improve the consolidation. The consolidation time decreased by 15 days, the pore water pressure decreased to 60.49%, and the settlement and vane shear strengths increased by 45.31% and 6.29%, respectively, at the surface. These results demonstrate the validity of the combined air booster and straight-line vacuum preloading method. Compared with the traditional vacuum preloading, the combined air booster and straight-line vacuum preloading method has better reinforcement effect. In addition, an estimation method for evaluating the average degree of consolidation and an empirical formula for evaluating the subsoil bearing capacity are proposed to assist in engineering decision making.

• Journal of the Korean Wood Science and Technology
• /
• 제31권5호
• /
• pp.15-22
• /
• 2003

국산 간벌재 3수종을 이용하여 밀도 및 수지첨가량을 달리해서 톱밥보드를 제조한 후 감압 후 상압, 감압·초음파 병행 후 상압으로 20분씩 3반복 함침하여 밀도 및 수지첨가량에 따른 함침 보드의 물성을 측정하고, 함침 시 초음파처리 효과를 조사하였다. 밀도 및 수지첨가량이 증가함에 따라 함침 보드의 밀도, 휨강도 및 브리넬 경도는 증가하였으나, 수지 함침율은 감소하였다. 감압·초음파 병행 후 상압 함침에 의한 함침보드의 밀도, 수지함침율, 휨강도 및 브리넬 경도가 감압 후 상압에 의한 함침 보드 보다 컸다. 보드 함침 시 초음파처리를 병행함으로써 수지 함침율이 증가되어 함침 보드의 물성에 영향을 미치는 것으로 판단된다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 춘계학술대회 논문집
• /
• pp.680-683
• /
• 2002

In this paper, it has been investigated that the design and simulation of vacuum pump driven by linear motor. Vacuum pump consists of unified plunger and piston part, coils, inlet valve and outlet valve. Operating principal of vacuum pump show that air is to flow to go inside through the inlet valve when the magnetic force (16N) is exerted, whereas, air is to flow to go outside through outlet valve when spring farce (14.8N) is exerted. The results of simulation. it was turned out that reached vacuum pressure was about -0.55 bar at 150 seconds, magnetic force was loaded with 16 Newton, displacement of actuator was about 8mm.

• 소성∙가공
• /
• 제8권5호
• /
• pp.491-497
• /
• 1999

The effect of partial squeeze on the quality of casting products in the vacuum die casting was investigated to make defect free casting products with excellent mechanical properties. The partial squeeze and vacuum die casting process was industrially implemented in making reaction shaft support which was made of a hypereutectic Al-15%Si alloy. To combine squeezing and vacuum effects, the plunger injection system was designed and attached on the chill vent type vacuum machinery system. The combination of vacuum effect before injection and partial squeezing effect after injection resulted in defect free die casting products. The uniform distribution of fine eutectic and proeutectic Si obtained from trial process also provided excellent mechanical properties.

• 한국의학물리학회지:의학물리
• /
• 제22권2호
• /
• pp.72-78
• /
• 2011

본 연구의 목적은 토모테라피(Hi-ArtII, TomoTherapy, USA) 치료 시 Bodyfix system (Medical Intelligence, Ele-kta, Schwabmuchen, Germany)에서 진공압박(Vacuum compression)에 따라 환자 위치잡이오차(Patient's setup-errors)를 평가하고자 하였다. Bodyfix system와 진공압박을 적용한 토모테라피를 이용하여 치료를 시행한 흉복부 환자 21명을 선정하였으며, 모든 환자는 치료 전 촬영된 총 477개의 메가볼테이지 전산화단층촬영(Mega-voltage computed tomography, MVCT)영상을 얻었다. 이를 통하여 확인된 좌우방향(Medial-Lateral direction, ML), 앞뒤방향(Anterior-Posterior direction, AP), 상하방향(Superior-Inferior direction, SI)과 SI중심축 회전각(Rotational angle of SI axis direction, Roll)에 대한 오차를 기록하고, 분석하였다. 세 방향 및 Roll에 대한 상관관계와 진공압박 정도가 다르게 적용된 다섯 그룹에 대하여 setup-errors를 분석하기 위해 각각 Pearson's product-moment coefficient와 One-way ANOVA를 이용하여 통계적으로 분석하였다(p<0.05). 분석결과 Systematic errors의 평균은 AP에서 6.00 mm, 표준편차는 SI에서 5.95 mm로 큰 오차를 보였다. Random errors의 평균은 SI방향에서 4.72 mm로 큰 오차가 발생하였다. 관계분석에서는 상관계수가 ML-Roll과 AP-Vector는 0.485, 0.244이고, SI-Vector에서 관계가 제일 높았다(0.637). 또한, 진공압박 정도가 다르게 적용된 다섯 그룹(Pressure range: 30~70 mbar) 사이의 setup errors를 분석한 결과 ML, SI방향과 Roll에서 모두 p=0.00 (p<0.05)로써 유의한 차이를 보였으며, SI방향에서 진공압박에 따른 오차 평균은 40 mbar과 70 mbar그룹에서 4.78 mm, -0.74 mm였다. 본 연구에서는 진공압박과 setup-errors의 평가를 통계적으로 분석하였으며, 압박 정도에 따라 SI방향에서 setup-errors의 차이를 확인하였다. 최종적으로 setup-errors와 내부장기의 움직임을 고려하자면 Bodyfix system을 이용한 진공압박을 적용시 최소 50 mbar 이상을 사용해야 할 것이다. 본 연구결과를 토대로 진공압박의 정확성과 내부장기 및 종양의 움직임을 정량적으로 분석할 필요가 있다고 판단된다.

• 분석과학
• /
• 제17권5호
• /
• pp.375-380
• /
• 2004

고진공 및 고압장치를 이용하여 온도와 압력변화에 따른 친핵성치환반응을 속도론적으로 연구하여, 속도상수와 활성화파라미터 및 Hammett ${\rho}$값을 구하였다. ${\Delta}V^{\ddag}$, ${\Delta}{\beta}^{\ddag}$ 및 ${\Delta}S^{\ddag}$는 모두 음의 값을 나타내었으며, 모든 압력 조건에서 친핵체의 치환기효과 ${\rho}x$는 음의 값을 나타내었다. 압력이 증가함에 따라 반응속도는 증가하였으며, 진공상태에서의 반응속도는 다소 감소함을 알 수 있었으며, 반응은 $S_N2$ 반응메카니즘을 따름을 알 수 있었다.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2005년도 제25회 추계학술대회논문집
• /
• pp.46-55
• /
• 2005

For the sea-level performance test of rocket motor designed to operate in the upper atmosphere, ejectors with no induced secondary flow are generally used, which serves dual purposes of evacuating the test cell and performing as a supersonic exhaust diffuser (SED). The main concern of this research is to simulate starting transients in order to visualize evolution of internal shock structures in SED with different initial cell (vacuum chamber) pressures. RANS code with low Reynolds $k-\varepsilon$ turbulence model was employed for these computations. Numerical results were compared with the pressure measurements previously performed [Proceedings of 2004 Annual Conference, KIMST], and showed good agreements with pressure-time history of measured data. In the case of low vacuum chamber pressure, abrupt impingement of the under-expanded supersonic jet from the nozzle onto the diffuser wall was observed, whereas initial impingement point was located downstream and moved slowly upstream in the case of non-vacuum chamber pressure. In spite of initially dissimilar evolution of shock structures, iso-mach contour revealed that the steady shock structures had little difference except the location of flow separation and normal shock.