DOI QR코드

DOI QR Code

Development of Vacuum Nozzle Seeder for Cucuribitaceous Seeds(I) - Design factors for vacuum seeding large sized seeds -

박과 종자용 진공노즐식 파종기 개발(I) 대립종자의 진공파종을 위한 요인구명 -


Abstract

This study was carried out to develop a vacuum nozzle seeder for the automation of large seeds sowing of fruit vegetables and rootstocks. Moreover, the seeding efficiency was examined to find the optimum operating condition considering high precision seeding. The important operating factors for high seeding rate were typically nozzle diameter and absorbing vacuum pressure. The optimum nozzle diameters were found 1.5, 1.5 and 2.0 mm for Chambak, Tuktozwa and Hukjong while the optimum vacuum pressures were 8.0㎪, 10.6㎪ and 5.3㎪, respectively. Under the optimum operating condition, the results indicated that the maximum seeding rates were 97.6%, 98.8% and 97.6% respectively for Chambak Tuktozwa and Hukjong. The vibrating acceleration of the hopper did not make any significant effects on the seeding rate when the vacuum pressure reached 8.0㎪ and the sowing rate became higher with lighter seed. As the seed became heavier, the larger diameter of nozzle was recommended 1.5mm of the nozzle diameter was found to be applied for the experimental seeds. The vacuum pressure was also found 8.0㎪ - 13.3㎪ at that time.

Keywords

References

  1. 농업기계화연구소. 1999. 농업기계화 시험연구보고서. pp. 18-36.
  2. 농촌진흥청. 2001. 2001 공정육묘장현황
  3. 민영봉, 김성태, 정태상. 2000. 진공노즐식 파종기의 최적 작동조건. 한국농업기계학회지 25(6): 463-470.
  4. Guarella, P., A. Pellerano and S. Pascuzzi, 1996. Experimental and Theoretical Performance of a Vacuum Seeder Nozzle for Vegetable Seeds. J. Agric. Engng Res. 64:29-36. https://doi.org/10.1006/jaer.1996.0043
  5. 尹藤道秋 등. 1977. 吸引式播種裝置に關 する研究. 日本農業機械學會誌, 37(4): 526-532.

Cited by

  1. Development of a Semi-automatic Seeder with Vacuum Nozzles of Quadratic Arrangement for Small-sized Seeds vol.36, pp.6, 2011, https://doi.org/10.5307/JBE.2011.36.6.434