• The Journal of the Korea institute of electronic communication sciences
• /
• v.19 no.1
• /
• pp.11-18
• /
• 2024

This paper presents a procedure to optimize the design of 70GHz band array antenna for automotive short range radar sensor applications using Chebyshev polynomials. SRR(: Short Range Radar) systems require a wide angle width and low Side lobe level to detect targets within close proximity while ensuring a high Field of View(FoV). The optimized antenna operates in the 76 to 81GHz frequency range, and to reduce the antenna size, we arranged 12 patches in series, achieving an SLL of 10dB, angle with of 112.5o, gain of 15.4dB and an input return loss of less than -10dB at 78GHz. In this paper, we proceed with antenna design for SRR using Chebyshev polynomials, and present an optimal design for antenna structures to be used in MRR(: Medium-Range Radar) and LRR(: Long Range Radar) applications based on this paper

• 보존과학연구
• /
• s.7
• /
• pp.218-236
• /
• 1986

In the fields of the cultural properties, the Infrared TV camera is being initiated to use instead of the Infrared photo film fo a better means to detect the description of drawings of the paintings. Seeing from the effect of transillumination, the Infrared TV camera with its long wave of visible spectrum that makes less absorption by the pigments and with the reflection rays passing through the base of colour layers makes it able to findbase drawing and letters. The detection range of transillumination by the infrared rays depends on the kinds of pigments, lines of the base drawing and wave length of the infrared rays. In our country, it was the first time to detect by our Conservation Science Dep't of The Research Institute of Cultural Properties by means of using Infrared TV camera to determine the mural paintings on the Josadang, Busuk Temple, resulted in an epoch-making success, that we have come to know the painting technique methods, how to treat for its conservation and making replica, reproduction, etc.

• Proceedings of the KSPS conference
• /
• 2003.10a
• /
• pp.129-132
• /
• 2003

The purpose of this study was to investigate the fundamental frequency(Fo) of voice signal, the first to the third(F1-F3), and duration in children with hearing impairment. Each subject made a recording of sustained /i/ and /a/, four VbV as and four VsV. The Praat 4.1.6. was used for analysis. The results of this study were as follows: First, F0 of children with hearing impairment were higher than normal children. Second, /a/ vowel was showed that F1, F2 and duration were higher than normal children. Third, /i/ vowel was showed that F1 and duration were higher than normal children. However, F2 was lower than normal children. Therapeutic implications have been drawn.

• Proceedings of the KSPS conference
• /
• 2007.05a
• /
• pp.64-66
• /
• 2007

The purpose of this study was to compare and analyze some acoustic parameters of the cochlear implanted children(N=20, aged 3-10) and to suggest a basic data on speech rehabilitaion for the cochlear implanted children. Acoustic analyses of seven Korean monophthongs produced by 4 contexts(V, CV, VC, CVC) were conducted for the cochler implanted children and normal hearing children(N=20, aged 3-10). Subjects were asked to pronounce a list of vowel repeating three times. The results of this study are the same as follows: First, in the case of the cochlear implanted group, there were no significant differences in F1 and F2. Second, in the case of the normal hearing group, there were significant differences in F2 /ㅜ/ between V and CVC, between VC and CVC. Third, there were significant differences in F1, F2 between CI group and normal hearing group.

• Proceedings of the KIEE Conference
• /
• 1995.11a
• /
• pp.444-446
• /
• 1995

This paper deals with semisphere-type sensor fo measuring the electric field waveforms by lightning discharges. The theoretical principle and design rule of the device are introduced, and also the calibration and application investigations are carried out. From the calibration experiments, the frequency bandwidth of the semisphere-type electric field measuring device ranges from 200 [Hz] to 1.56 [MHz], and the sensitivity of sensor is 0.96 [mV/V/m]. The electric field waveforms produced by lightning discharges were observed for June and August 1995. It is shown that the electric field waveforms produced at the distance of more than 50 [km] include only radiation component.

• Microbiology and Biotechnology Letters
• /
• v.5 no.1
• /
• pp.13-17
• /
• 1977

We isolated lactobacillus phage hosting L. casei strains, and examined distribution of the phages and resistance to the sanitary reagent treatment in drainages fo Korea plant. 1) There were Type 1, 11, 111, and 1v of the phage J$_1$in plantdrainages and the order of distribution was Type 1v>Type 11>Type 1>$^1$Type 111. 2) All the phages in plantdrainages were completely removed by spreading the invert soap. 3) Sodium hypochloride, invert soap and dresol were most effective sanitary reagents, and isopropyl alcohol and ethyl alcohol were sanitary reagents.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.14 no.9
• /
• pp.762-767
• /
• 2001

We report the white light emission from the multilayer organic electroluminescent(EL) device using exciplex emission. The exciplex at 500nm originated between poly(N-vinylcarvazole)(PVK) and 2,5-bis(5'-tert-butyl-2-benzoxazoly)thiophene(BBOT) and exciplex of 50nm originated from N,N'-diphenyl-N,N'-(3-methyphenyl)-1,1'-biphenyl-4,4'-diamine(TPD) and BBOT were observed. Also, the energy transfer from PVK to BBOT and poly(3-hexylthiophene)(P3HT) in mixed emitting materials was occurred. The electroluminescence(EL) spectra of organic EL device which have a device structure of ITO/CuPc(5nm)/emitting layer(100nm)/BBOT(30nm)/LiF(1.4nm)/Al(200nm) were slightly changed as a function of the applied voltage. The luminance fo 12.3 ${\mu}$W/$\textrm{cm}^2$ was achieved at 20V and EL spectrum measured at 20V corresponds to Commission Internationale de L\`Eclairage(CIE) coordinates of x=0.29 and y=0.353.

• Solar Energy
• /
• v.15 no.1
• /
• pp.3-11
• /
• 1995

Heat transfer phenomena during inward freezing process of the water in a horizontal cylinder were experimentally studied. The cooling temperature of a wall more significantly affects the timewise average temperature than the initial superheating temperature of the water. In addition, it was absolved that the timewise average temperature was influenced by the initial volume ratio of the water($V_l/V_{tot}$) at the same temperature conditons. One the other hand, the freezing speed of the upper part in the water-ice interface was quickly progressed due to natural convection. Furthermore, experimental observation showed that the frozen mass fraction($M_s/M_{tot}$) was influenced by the initial volume ratio of the water($V_l/V_{tot}$). It was noted that the frozen mass fraction for each $V_l/V_{tot}$ represented by $Ste^*$ and Fo.

• Design & Manufacturing
• /
• v.11 no.3
• /
• pp.46-50
• /
• 2017

Press processing is one of the best machining methods capable of mass production, satisfying dimensional, shape and quality among the methods of processing a metal plate. Among them, Fine blanking is a method of obtaining a precise cross-section such as machining of the shear surface shape. In this research, Using SCP-1 and SHP-1 materials. The deformation behaviors of the material flow affecting the die height of the shear section in accordance with the position of the V-ring in the Fine blanking were compared and analyzed. Result of interpretation, It was confirmed that the force acts on the position where the material flow direction accurately forms the die roll that the material of SCP-1 is at a position of 1.5 mm and the material of SHP-1 is at 2.0 mm. As a result, it was confirmed that the state of fo1111ing the shear surface by the V-ring was excellent. Using analysis results, In the experiment, the height of the die roll was considered by applying The position of the V-ring was 1.5 mm in SCP-1 and 2.0 mm in SHP-1. As a result of comparing the height of the die rolls, the height values of the die rolls were different from each other, It has been considered that the tendency of the die rolls to coincide with each other. It is considered that the difference of the die roll height is caused by the pressure input of the V-ring. In this study, the deformation behavior of the material(In addition to the position of the V-ring, the flow direction of the material depends on the shape of the V-ring and the Indentation amount) is considered to be an important factor in determining die roll height.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.15 no.6
• /
• pp.695-702
• /
• 2015

A 1-V 1.6-GS/s 5.58-ENOB flash ADC with a high-speed time-domain comparator is proposed. The proposed time-domain comparator, which consumes low power, improves the comparison capability in high-speed operations and results in the removal of preamplifiers from the first-stage of the flash ADC. The time interpolation with two factors, implemented using the proposed time-domain comparator array and SR latch array, reduces the area and power consumption. The proposed flash ADC has been implemented using a 65-nm 1-poly 8-metal CMOS process with a 1-V supply voltage. The measured DNL and INL are 0.28 and 0.41 LSB, respectively. The SNDR is measured to be 35.37 dB at the Nyquist frequency. The FoM and chip area of the flash ADC are 0.38 pJ/c-s and $620{\times}340{\mu}m^2$, respectively.