• Nuclear Engineering and Technology
• /
• v.54 no.11
• /
• pp.4215-4219
• /
• 2022

The Cd_0.95Mn_0.05Te_0.98Se_0.02 (CMTS) ingot was grown by the vertical Bridgman technique at low pressure. All wafers showed high resistivity, which suggests potential as a room-temperature semiconductor detector. The resistivity of the CMTS planar detector was 1.47 × 10¹⁰ Ω·cm and mobility lifetime product of electrons was 1.29 × 10^-3 cm²/V. The spectroscopic property with Am-241 and Co-57 was evaluated. The energy resolution about 59.5 keV gamma-ray of Am-241 was 11% and the photo-peak of 122 keV gamma-ray from Co-57 was clearly distinguished. The result shows the first detector-grade CMTS in the world and proves CMTS's potential as a radiation detector operating at room temperature.

• Journal of Pharmaceutical Investigation
• /
• v.31 no.1
• /
• pp.7-12
• /
• 2001

Amphotericin B (AmB) is a drug of choice for the treatment of systemic fungal diseases, but its use is considerably limited due to a high incidence of toxicity, particularly nephrotoxicity. It has been demonstrated that the toxicity of AmB is caused by self-aggregated species of the drug and that unaggregated (monomeric) drug is nontoxic but still expresses antifungal activity. Poly (ethylene oxide) (PEO) is a water-soluble polymer, which may impact the aggregation state of AmB. We have studied the aggregation state of AmB as a function of PEO molecular weight and concentration. At 3,000 and 8,000 g/mole, there was minimal or no change of critical aggregation concentration (CAC) of AmB regardless of the concentration of polymer. By contrast at 20,000 g/mole, the CAC of AmB strikingly increased to 24.3 and $37.5\;{\mu}M$ at 5.0% and 10 % w/v of polymer, respectively. The critical overlap concentration (COC) of PEO 20,000 g/mole was 5.5%. It appears that an interaction between monomeric AmB and polymer coil increases above the COC, competing with self-aggregation of the drug. Accordingly, the degree of aggregation of AmB stayed low and the toxicity became less. There was no such effect at 3,000 and 8,000 g/mole of PEO, owing perhaps to small dimensions in comparison to AmB. Based upon these findings, less toxic AmB formulation may be developed by a pharmaceutical technique such as solid dispersion system containing both AmB and PEO 20,000 g/mole.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.6 no.5
• /
• pp.281-286
• /
• 2011

FMCW Radar sensor is commonly used for an automobile collision avoidance system for rider's safe. Systems using FMCW radar, however, would be one of expensive solutions for just simple rear obstacle detection purpose due to its high cost. In this letter, a short range rear obstacle detector using novel 24GHz AM radar sensor is presented. It can be implemented at significantly lower cost than FMCW radar for practical commercialization. The proposed AM radar sensor module is fabricated in a single aluminum housing to reduce the overall size while using single power supply voltage of 12V with 1200mA current for automotive applications. The measured detection range is up to 210cm with 10cm of distance resolution, which is suitable for a parking assistance system for automobiles.

• Journal of Welding and Joining
• /
• v.35 no.2
• /
• pp.6-12
• /
• 2017

Ti-alloys have high specific strength and are widely used for the filed of space aeronautics plant. However, it is difficult to process Ti-Alloys due to its high yield strength and it cannot raise the machining speed because it has a possibility of catching fire while processing. In order to reduce the number of processes for the Ti-alloys, the researches related to Additive Manufacturing(AM) have been actively carried out at the moment. As for the initial stage of AM market related to Ti-alloys, it started to use the raw material of powder metal, and it is currently being developed based on welding. In this study, Interpass peening reduced the size of the primary ${\beta}$ grain in the z-axis direction, increased the nucleation site of ${\alpha}-colony$, and decreased the length and width of ${\alpha}$ laths as though interpass rolling. Interpass peening leads to an increase in yield/ultimate tensile strength without decrease elongation, resulting decrease in anisotropy of the material.

• Journal of Radiation Protection and Research
• /
• v.10 no.1
• /
• pp.67-73
• /
• 1985

The manganous sulfate bath method for neutron source calibrations at the K-SRI is described together with the measurement of neutron emission rate of a source and the corrections applied for capture by competing nuclei of neutrons, and thermal neutron leakage, neutron absorption in the source itself. The commercially available neutron sources (Am-Be, $^{252}Cf$) for the calibration checks of neutron radiation instruments in the MeV range are considered in this paper.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2007.08b
• /
• pp.1249-1252
• /
• 2007

We have fabricated 3.5” transparent AM-OLED panel driven by PEALD grown ZnO TFT. The performance of ZnO thin film transistor was improved by adapting top gate structure, protection layer for ZnO from photolithography process, optimizing temperature and plasma power of ZnO growth process. The ZnO-TFT has a mobility of $8.9cm^2/V.s$, a subthreshold swing of 0.95V, and an on/off ratio of $10^7$.

• Electronics and Telecommunications Trends
• /
• v.9 no.4
• /
• pp.131-138
• /
• 1994

최근 무선통신의 활성화에 따라, V/UHF(very/ultra high Frequency) 대역에서 한정된 주파수를 효율적으로 이용하기 위한 방법의 하나로서, 점차 점유 주파수 대역의 폭을 축소하여 보다 많은 이용자를 수용하도록 무선 채널의 협대역화가 추진되고 있다. 본 고에서는 먼저 V/UHF 대역 무선 통신에서 채널의 협대역화에 관련된 기술 중에서 현재까지 사용되고 있는 FM(frequency modulation), AM(amplitude modulation) 변조 방식의 장,단점을 살펴본후, 새로운 LM(linear modulation) 변조 방식에 대한 기술적 배경 및 특성을 알아보았다. LM은 SSR(single side band)-AM이 발전한 것으로서, TTIB(transparent tone-in-band), CLT(Cartesian loop transmitter), FFSR(feed-forward signal regeneration), DSP(digital signal processing)등 4가지의 기술이 결합하여 만들어진 것이다. LM 방식에 사용된 4가지 기술을 소개하고, 기존의 변조 방식에 비해 개선된 사항에 대해 서술한다.

• Phonetics and Speech Sciences
• /
• v.2 no.3
• /
• pp.101-113
• /
• 2010

The present study investigated how the kinematics of the /a/-to-/i/ tongue movement in Korean would be influenced by prosodic boundary. The /a/-to-/i/ sequence was used as 'transboundary' test materials which occurred across a prosodic boundary as in /ilnjəʃ$^h$a/ # / minsakwae/ ('일년차#민사과에' 'the first year worker' # 'dept. of civil affairs'). It also tested whether the V-to-V tongue movement would be further influenced by its syllable structure with /m/ which was placed either in the coda condition (/am#i/) or in the onset condition (/a#mi). Results of an EMA (Electromagnetic Articulagraphy) study showed that kinematical parameters such as the movement distance (displacement), the movement duration, and the movement velocity (speed) all varied as a function of the boundary strength, showing an articulatory strengthening pattern of a "larger, longer and faster" movement. Interestingly, however, the larger, longer and faster pattern associated with boundary marking in Korean has often been observed with stress (prominence) marking in English. It was proposed that language-specific prosodic systems induce different ways in which phonetics and prosody interact: Korean, as a language without lexical stress and pitch accent, has more degree of freedom to express prosodic strengthening, while languages such as English have constraints, so that some strengthening patterns are reserved for lexical stress. The V-to-V tongue movement was also found to be influenced by the intervening consonant /m/'s syllable affiliation, showing a more preboundary lengthening of the tongue movement when /m/ was part of the preboundary syllable (/am#i/). The results, together, show that the fine-grained phonetic details do not simply arise as low-level physical phenomena, but reflect higher-level linguistic structures, such as syllable and prosodic structures. It was also discussed how the boundary-induced kinematic patterns could be accounted for in terms of the task dynamic model and the theory of the prosodic gesture ($\pi$-gesture).

• Polymer(Korea)
• /
• v.34 no.5
• /
• pp.459-463
• /
• 2010

Amphotericin B (AmB) is anti-fungal agent for the treatment of systemic fungal infections, but its poor solubility has limited clinical applications. In this study, a new gel formulation made up of L-arginine as solubilizer, thermosensitive Poloxamer 407 (P 407), and adhesive carbopol was designed for effective solubilization and delivery of AmB. The aqueous solubility of AmB was enhanced up to 2.6 mg/mL by addition of L-arginine. Aqueous P 407 solutions of more than 20% w/v showed thermo-induced sol-gel-sol phase transition. The phase transition behavior was affected by the presence of AmB and L-arginine, and the phase transition range was broadened by addition of carbopol. In vitro drug release was improved by the solubilizing effect of L-arginine, and the presence of mucoadhesive carbopol prolonged the release rate as a function of concentration.

• Journal of the Korean Chemical Society
• /
• v.48 no.2
• /
• pp.123-128
• /
• 2004

Quantum chemical quantities, enthalpy of formation(${\Delta}H_f$), HOMO and LUMO energy, and dipole moment(${\mu}_D$) were acquired by AM1, PM3, and ZINDO/1 methods for polyamines and imidazole derivatives. The investigation of the inhibitory activity on some Ni(II) complexes with polyamines and imidazole derivatives is performed by ZINDO/1 calculations. It was found that experimental inhibitory activity(IA) appeared when the value of net charge and enthalpy of formation were over 0.03 and -300 eV, respectively for Ni(II) complexes. These results showed that the Ni(II) complexes have exception on the following very unstable compounds: square pyramidal [Ni(dpt)(tn)])]$^{2+}$(dpt=3,3'-diaminodipropylamine)(tn=1,3-diaminopropane) and distorted tetrahedral [Ni(N-PropIm))$_2$(NCS))$_2$](N-PropIm=N-Propylimidazole).