• The Korean Journal of Nuclear Medicine Technology
• /
• v.22 no.2
• /
• pp.84-87
• /
• 2018

Purpose The radiopharmaceutical used in the nuclear medicine department is used only for the specific patient according to the prescription or instruction of the doctor without selling, so it is dispensed and it is distributed and used for the examination. Radiopharmaceuticals administered to patients should be managed appropriately as well as radiation safety management during dispensation. The purpose of this study is to investigate microbial contamination during dispensation of radiopharmaceuticals Materials and Methods This study distinguished between general workbench and clean workbench and performed three tests. First, microbial cultivation test of radiopharmaceutical prepared and dispensed in general workbenches and sterile workbenches were carried out five times, respectively. The second test was performed settle plate method three times before and after the use of the exhaust filter. Finally, Adenosine Triphosphate (ATP) measurement was performed in each workbench to measure bacterial counts. In addition, ATP measurement were carried out by designating locations and items that may be contaminated during dispensation. Results In the microbial culture test, no microorganisms were detected in both samples. In the settle plate method, it was detected without using of the exhaust filter in a general workbench once. In the ATP measurement test, it was measured at the level of 400 RLU or less, which is the standard value of contamination, in both workbenches surface. In additional ATP measurement test, the refrigerator handle in the distribution room was measured above the reference value of 1217 RLU, the vacuum vial shield of the Tech Generator at 435 RLU, and the syringe holder at 1357 RLU. After environmental disinfection, the results were reduced to 311 RLU, 136 RLU, and 291 RLU. Conclusion No contamination by bacteria was found in both workbenches. However, microbial contamination may occur if the use of an exhaust filter or proper hand hygiene is not achieved. Regular inspections and management for aseptic processing themselves will be necessary.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.14 no.2
• /
• pp.61-72
• /
• 2019

Since the financial crisis in 1997, large scale unemployment and poverty have become serious, but there has been a surge in public and social job creation projects. However, with the limitations of low-wage and short-term jobs, the need for long-term, high quality jobs gradually began to garner attention. In recent years, social enterprises have grown both quantitatively and qualitatively and interest in social enterprises has increased; more specifically, scholars are interested in the determinants of success and failure of social enterprises in the academic field. In this study, we examined the effects of social enterprise characteristics on financial and social performance. In particular, we empirically analyzed social enterprises registered in the Korea Social Enterprise Agency. The financial performance of the social enterprise was measured using the net income ratio, operating income ratio, and the return on asset. The social performance of the social enterprise was measured by the total number of workers and the employment rate of vulnerable social groups. The characteristics of the social enterprise included CEO characteristics (gender, age, experience in operating the social enterprise), firm size, and the elapsed time of authentication. The results of the empirical analysis are as follows. First, as a result of analysis for the effect on financial performance, we found that the financial performance has a statistically significant, positive relationship with firm size, organizational form, government subsidies, and capital adequacy ratio. And we found that the social performance has a statistically significant, negative relationship with CEO age and credit debt dependence. Second, as a result of analysis for the effect on social performance, we found that the total number of workers had a significant, positive relationship with CEO gender and CEO age, as well as firm size, government subsidies; whereas the total number of workers had a significant, negative relationship with certification type and industry dummy. Comparatively, the employment rate of the vulnerable social groups had a significant, positive relationship with CEO gender and certification type, but there was no statistically significant relationship with the government subsidies or firm size.

• Korean Journal of Breeding Science
• /
• v.50 no.4
• /
• pp.424-433
• /
• 2018

Watermelon (Citrullus lanatus) is an economically important vegetable crop all over the world, which has functional compounds such as lycopene and citrulline. Gummy stem blight caused by Didymella bryoniae is one of the most devastative diseases in watermelon. Single nucleotide polymorphisms (SNPs), which are genetic variations occurring between individuals with respect to a single base, were often used to construct genetic linkage maps and develop molecular markers linked to a variety of horticultural traits and resistance to several diseases. In this study, we developed high-resolution melting (HRM) markers based on SNPs generated from NGS resequencing of two parents in watermelon. Plant materials were C. lanatus '920533' (female and susceptible parent), C. amarus 'PI 189225' (male and resistant parent), and their $F_1$ and $F_2$ progenies. A total of 13.6 Gbp ('920533') and 13.1 Gbp ('PI 189225') of genomic sequences were obtained using NGS analysis. A total of 6.09 million SNPs between '920533' and 'PI 189225' were detected, and 354,860 SNPs were identified as potential HRM primer sets. From these, a total of 330 primer sets for HRM analysis were designed. As a result, a total of 61 HRM markers that have polymorphic melting curves were developed. These HRM markers can be used for the construction of SNP-based linkage maps and for the analysis of quantitative trait loci (QTLs) related to gummy stem blight resistance.

• Journal of the Korean Society of International Agriculture
• /
• v.30 no.4
• /
• pp.257-268
• /
• 2018

Recently, the international standardization of ISO in the field of Oriental Herbal Medicine has been progressing rapidly under the direction of China's promotion. China's intention to promote international standardization is to extend its influence to the world and beyond the domestic market. The Oriental medicine system in East Asia has similar roots in academic terms, but the medicines that can be supplied and received in each country are different and have developed independently. The international standardization of medicinal herbs is expected to function in a direction that weakens such differentiation and independence. From a commercial point of view, international standardization is no different from creating evaluation criteria for oriental medicinal products, and it is expected that its potential impact on domestic and overseas markets and producers will be large. In particular, the international standardization centered on China can lead to favorable evaluation criteria for China, which may further negatively affect the market competitiveness of domestic raw materials, which have been pushed back by Chinese manufacturers. If the domestic production base is weakened, not only will the farmers suffer but the supply and demand of raw materials will also be manipulated, safety management control will be reduced, and the development of oriental herbal products using domestic raw materials will be hurt. Therefore, in the promotion of international standardization, it is necessary not only to reflect the value of Korean herbal medicine but also to provide strategic responses to protect the domestic production base. However, in the case of recent initiatives, there is no precedent in analyzing influence on the production partners and the related industries. In addition, there are few related papers and reports on the subject, so the publicity process has not been done sufficiently. In response to this, this study will examine the countermeasures against the international standardization of herbal medicines through reviewing its present status and evaluating the agenda of the Korean initiative.

• Food Engineering Progress
• /
• v.21 no.2
• /
• pp.158-166
• /
• 2017

Although Semisulcospira libertina is generally regarded as a supplement for the alleviation of alcohol hangover, little is known about its effects on cell metabolism. Therefore, this study was conducted to analyze the constituents of the extracts prepared using different extraction methods and to compare their biochemical properties. The amino acid contents were found to be much higher in acidic and enzymatic hydrolysates than hot water extracts from S. libertina. DPPH radical scavenging activities in acidic and enzymatic hydrolysates were higher than those of hot water extracts. Three types of S. libertina hydrolysate was added to HepG2 cells damaged by acetaminophen (AAP), after which the survival rate of HepG2 cell were measured. In addition, lactate dehydrogenase (LDH) activities in the culture media were evaluated. The survival rates of HepG2 cells were $77.0{\pm}4.3%$ and $81.5{\pm}1.3%$ at 3 h and 5h enzymatic hydrolysates, respectively. These cell survival rates were higher compared to those of the negative control group ($67.8{\pm}4.3%$) treated only with acetaminophen. Cellular toxicities induced by treatment with AAP were also significantly alleviated in response to treatment with the extracts of S. libertina. In addition, the activities of 2 key enzymes that metabolize ethanol, alcohol dehydrogenase and aldehyde dehydrogenase, were upregulated by 4.7- and 2.7-fold respectively in response to treatment with a 3 h enzymatic hydrolysate of S. libertina. Taken together, these results provide biochemical evidence of the method by which S. libertina exerts its biological functions, including the alleviation of alcohol hangover and the protection of liver cells against toxic insults.

• Journal of the Korean Orthopaedic Association
• /
• v.53 no.6
• /
• pp.513-521
• /
• 2018

Purpose: The purpose of this study was to assess the effectiveness and complications of an ultrasound-guided axillary brachial plexus block performed by orthopedic surgeons. Materials and Methods: From March to May 2017, an ultrasound-guided axillary brachial plexus block was performed on a total of 103 cases of surgery. A VF13-5 transducer from Siemens Acuson X300 was used. The surgical site was included in the range of the anatomic sensory distribution of the blocked nerve, except for the case where an operation time of more than 2 hours was expected due to multiple injuries and the operation of the upper arm. The procedure was performed by 2 orthopedic surgeons in the same method using 50 ml of solution (20 ml of lidocaine HCl in 2%, 20 ml of ropivacaine in 0.75%, 10 ml of normal saline in 0.9%). The success rate of anesthesia induction during surgery, anesthetic induction time, anatomical range of operation, duration of postoperative analgesia and complications were investigated. Results: The results from the 2 practices were similar. The anesthesia was successful in 100 out of 103 patients (97.1%). In these patients, the average needling time was 5.5 minutes (2.5-13.2 minutes), the average induction time to complete anesthesia was 18.4 minutes (5-40 minutes), and the average duration of postoperative analgesia was 402.8 minutes (141-540 minutes). The post-anesthesia immediate complications were dizziness in 1 case, nausea and vomiting in 4 cases, and peri-oral numbness in 2 cases, but surgery was performed without problems. All these 7 cases with complications recovered on the same day. A total of 3 cases failed with anesthesia, and they were treated by an injection with local anesthesia in the operation room in 2 cases and switched to general anesthesia in 1 case. Conclusion: An ultrasound-guided axillary brachial plexus block, which was performed by orthopedic surgeons allows anesthesia in a brief period and the high success rates of anesthesia for certain surgeries of the elbow and surgeries on forearm, wrist and hand. Therefore, it can reduce the waiting time to the operating room. This technique is a relatively safe procedure and dose selective anesthesia is possible.

• Korean Journal of Breeding Science
• /
• v.50 no.4
• /
• pp.478-484
• /
• 2018

A soybean cultivar "Chamol" for double cropping for use as soy-paste and tofu was developed using a pedigree method in 2011 as a cross between "Shinpaldal2" and "Keunol." A promising line, SS99502-2B-89-1-3-4-1-1, was selected and designated as "Milyang210". It was promising and showed good results from regional yield trials (RYTs) for 3 years from 2009 to 2011 and released with the name "Chamol." It has a determinate growth habit, white flowers, gray pubescence, yellow seed coat, yellow hilum, spherical seed shape, and large seeds (27.7 g per 100 seeds). The maturity date of "Chamol" was September 18 (100 day growing period) in RYT and it is suitable for double cropping with winter crops such as onion. "Chamol" was resistant to bacterial pustule and soybean mosaic virus and tolerant to lodging in fields. Furthermore, the average yield of "Chamol" was 2.51 ton/ha in the regional yield trials conducted for 3 years from 2009 to 2011.

• Journal of the Korean Society of Urban Environment
• /
• v.18 no.4
• /
• pp.531-546
• /
• 2018

Air quality forecasting system with Asian dust emissions was developed in East Asia, and $PM_{10}$ forecasting performance of chemical transport model with Asian dust emissions was validated and evaluated. The chemical transport model (CTM) with Asian dust emission was found to supplement $PM_{10}$ concentrations that had been under-estimated in China regions and improved statistics for performance of CTM, although the model were overestimated during some periods in China. In Korea, the prediction model adequately simulated inflow of Asian dust events on February 22~24 and March 16~17, but the model is found to be overestimated during no Asian dust event periods on April. However, the model supplemented $PM_{10}$ concentrations, which was underestimated in most regions in Korea and the statistics for performance of the models were improved. The $PM_{10}$ forecasting performance of air quality forecasting model with Asian dust emissions tends to improve POD (Probability of Detection) compared to basic model without Asian dust emissions, but A (Accuracy) has shown similar or decreased, and FAR (False Alarms) have increased during 2017.Therefore, the developed air quality forecasting model with Asian dust emission was not proposed as a representative $PM_{10}$ forecast model in South Korea.

• Journal of the Korean Society of Urban Environment
• /
• v.18 no.4
• /
• pp.485-494
• /
• 2018

This study aims to identify the characteristics of oxidation and chemical composition of PM in winter season, 2017 at Incheon area. The mean concentration of air pollutants were $46{\pm}22{\mu}g/m^3-PM_{10}$, $29{\pm}18{\mu}g/m^3/-PM_{2.5}$, $5{\pm}3ppb-SO_2$, $0.56{\pm}0.24ppm-CO$, $21{\pm}13ppb-O_3$ and $28{\pm}17ppb-NO_2$, respectively. The dominant ion of the $PM_{1.0}$ chemical component were organic with $3.2{\mu}g/m^3$ and nitrate with $1.9{\mu}g/m^3$. The day and night variation of the $PM_{1.0}$ chemical components was higher in nighttime than those of daytime. The averaged nitrate oxidation rate (SOR) was 0.06 and sulfate oxidation rate was 0.11 during the field campaign. In the high mass loading period, nitrate oxidation rate (NOR) was up to 0.6 and also the nitrate in $PM_{1.0}$ was increased. The averaged ratio of $NO_x/SO_2$ was 8.7 and nitrate/sulfate was 3.1, respectively. In this results, the nitrate component in $PM_{1.0}$ was influenced by NOx from the stationary source as power plant and the mobile source around the measurement site.

• Korean Journal of Breeding Science
• /
• v.50 no.4
• /
• pp.387-395
• /
• 2018

This study was conducted to identify DNA markers related to resistance to herbicide containing mesotrione in Tongil type rice. Two Tongil type elite lines; Milyang154 and Suweon382, showed resistance to mesotrione, whereas the others were susceptible at 20 days after mesotrione application, and severe growth inhibition was observed in the remaining 13 lines. As a result of analysis of mesotrione resistance using 190 $F_2$ populations derived from a cross of Hanareum2 (susceptible) and Milyang154 (resistant), the mesotrione resistance locus was shown to be a single dominant gene with a 3:1 segregation ratio ($X^2=1.19$, P=0.31). To identify a DNA marker closely linked to the mesotrione resistance gene, bulked segregant analysis (BSA) was adopted. The DNA marker RM3501 was identified on chromosome 2 with a recombinant value of 0.53 to the mesotrione resistance gene. Mst1(t) was located between SSR (simple sequence repeat) markers RM3501 and RM324 with a physical map distance of 10.2 Mb-11.4 Mb on chromosome 2. The band pattern of agarose gel electrophoresis of the SSR marker RM3501 showed the same segregation pattern with respect to mesotrione treatment in 20 Tongil type varieties and a $BC_2F_2$ segregation population derived from a cross between Unkwang (resistant) and Hanareum2 (susceptible). Thus, the RM3501 DNA marker could be used in breeding programs for Marker Assisted Selection in mesotrione resistant rice breeding.