• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.8 no.3
• /
• pp.924-944
• /
• 2014

This paper investigates the power allocation and outage performance of MIMO full-duplex relaying (MFDR), based on orthogonal space-time block codes (OSTBC), in cognitive radio systems. OSTBC transmission is used as a simple means to achieve multi-antenna diversity gain. Cognitive MFDR systems not only have the advantage of increasing spectral efficiency through spectrum sharing, but they can also extend coverage through the use of relays. In cognitive MFDR systems, the primary user experiences interference from the secondary source and relay simultaneously, owing to full duplexing. It is therefore necessary to optimize the transmission powers at the secondary source and relay. In this paper, we propose an optimal power allocation (OPA) scheme based on minimizing the outage probability in cognitive MFDR systems. We also analyse the outage probability of the secondary user in noise-limited and interference-limited environments in Nakagami-m fading channels. Simulation results show that the proposed schemes achieve performance improvements in terms of reducing outage probability.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.6 no.11
• /
• pp.3026-3045
• /
• 2012

In this paper, diversity-multiplexing tradeoff (DMT) of three-user wireless multiple-antenna cooperative systems is investigated in general fading channels when half-duplex and decode-and-forward relay is employed. Three protocols, i.e., adaptive protocol, receive diversity protocol, and dual-hop relaying protocol, are considered. The general fading channels may include transmit and/or receive correlation and nonzero channel means, and are extensions of independent and identically distributed Rayleigh or Rician fading channels. Firstly, simple DMT expressions are derived for general fading channels with zero channel means and no correlation when users employ arbitrary number of antennas. Explicit DMT expressions are also obtained when all users employ the same number of antennas and the channels between any two users are of the same fading statistics. Finally, the impact of nonzero channel means and/or correlation on DMT is evaluated. It is revealed theoretically that the DMTs depend on the number of antennas at each user, channel means (except for Rayleigh and Rician fading statistics), transmit and/or receive correlation, and the polynomial behavior near zero of the channel gain probability density function. Examples are also provided to illustrate the analysis and results.

• Journal of Broadcast Engineering
• /
• v.20 no.2
• /
• pp.215-223
• /
• 2015

Energy harvesting technique is an energy charging technique for communication device in energy-constrained environment. Recently, energy harvesting technique that harvests energy from wireless radio frequency signal is proposed. Representatively, there are time switching technique and power splitting technique. This paper proposes an optimal harvesting time allocation scheme in a wireless cognitive relay network when secondary user relay uses energy harvesting technique to transmit information. Secondary user relay receives information and energy simultaneously from the secondary user source's signal via time switching technique. We aim to maximize the instantaneous throughput by optimizing harvesting time of the secondary user relay. Simulation results show that using optimized harvesting time gets larger instantaneous throughput compared to using constant harvesting time.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.23 no.3
• /
• pp.431-444
• /
• 2013

Widespread use of smartphones and wireless LAN accompany a threat called rogue AP. When a user connects to a rogue AP, the rogue AP can mount the man-in-the-middle attack against the user, so it can easily acquire user's private information. Many researches have been conducted on how to detect a various kinds of rogue APs, and in this paper, we are going to propose an algorithm to identify and detect a rogue AP that impersonates a regular AP by showing a regular AP's SSID and connecting to a regular AP. User is deceived easily because the rogue AP's SSID looks the same as that of a regular AP. To detect this type of rogue APs, we use a machine learning algorithm called SVM(Support Vector Machine). Our algorithm detects rogue APs with more than 90% accuracy, and also adjusts automatically detection criteria. We show the performance of our algorithm by experiments.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.47 no.5
• /
• pp.25-32
• /
• 2010

This paper evaluates the outage probability of cognitive relay networks with cooperation between secondary users based on the underlay approach, when multiple primary receivers coexist with secondary users. Using an appropriate relay selection criterion in cognitive radio networks, we derive the outage probability of secondary user. It is shown that the outage probability increases as the number of primary receivers increases and we quantify the increase. Through the simulation results, we verify that the performance of relaying transmission is varied more sensitively compared to that of direct transmission as the number of primary receivers increases. In addition, the relaying transmission can be less efficient than the direct transmission when multiple primary receiver exist but it can be more efficient than the direct transmission by increasing the relay selection diversity.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38A no.5
• /
• pp.451-458
• /
• 2013

This paper proposes a cross-tier interference avoidance scheme to improve femtocell performance in single frequency heterogeneous cellular networks (SFHCN). The scheduled macrocell users located close femtocell base stations cause serious interference to those femtocells so that the performance of femtocell is dramatically deteriorated. To solve this problem, this paper proposes an interference avoidance scheme by reversing the uplink and downlink frames of such femtocells. After reversing the uplink and downlink frames, femtocell base station relays the macrocell user data as well as transmitting its own data. In the 1st relaying link, femtocell and macrocell users transmit their data respectively divided uplink frames and in the 2nd relaying link, femtocell base station transmit macrocell and femtocell data using a simultaneously superposition coding scheme. Computer simulation results confirm performance improvement of proposed scheme.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39A no.7
• /
• pp.404-412
• /
• 2014

Exploiting multiple antennas at mobile devices is difficult due to limited size and power. In this paper, a distributed MIMO protocol achieving the capacity of conventinal MIMO systems is proposed and analyzed. For exploiting distributed MIMO features, Quantize-Map-and-Forward (QMF) scheme shows improved performance than Amplify-and-Forward (AF) scheme. Also, the protocol based on multiple access channel (MAC) is proposed to improve the multiplexing gain. We showed that sufficient condition of the number of slave nodes to achieve the gain of a MAC based protocol. Because the base station can support multiple clusters operating in distributed MIMO, the total cellular capacity can be extremely enhanced in proportional to the number of clusters.

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.741-742
• /
• 2011

In this paper, an over-current relay algorithm module for a network-based protective relay simulator is proposed. The proposed protective simulator is based on the client-sever paradigm. The module composed of a server and user interface provides a network-based simulation environment.

• Proceedings of the KIEE Conference
• /
• 2000.07a
• /
• pp.200-202
• /
• 2000

The protective relaying setting job which has been performed manually, takes a long time and is vulnerable to errors. The goal of this paper is to develop the user-friendly interface for integrated protection system environment and to control protection-related jobs and the database management efficiently and conveniently.

• Proceedings of the KIEE Conference
• /
• 2005.10b
• /
• pp.517-519
• /
• 2005

In this paper, we consider a digital protection IED(Intelligent Electric Device) for a distributed power system. The IED can measure various elements for protection and communicate with another devices through network. The protection IED is composed of specific function modules: signal process module which converts analog signal from PT and CT handle algorithm to digital one; communication module for connection with another IEDs; input/output module for user-interfaces. A general purpose DSP board with TMS320C2812 is used in the IED. In order to verify the proposed IED, experimental researches with the power system simulator DOBLE has been carried out for a phase earth fault. The results show an under-voltage relaying algorithm has been realized sucessfully in the hardware system.