• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2006년도 제27회 추계학술대회논문집
• /
• pp.106-109
• /
• 2006

The purpose of this study is to analyze the installed performance of the PW206C turbo shaft engine used in the development of the smart UAV(Unmanned Ariel Vehicle) by KARI(Korean Aerospace Research Institute). It mainly aims to investigate performance behavior at installed conditions using both inlet and exhaust losses generated by CFD analysis of the ducts. The ways employed to be able to analyze the performance extensively were mainly rallied out by performing design point analysis of the engine where the performance simulation results from the commercial program 'GASTURB 9' used for simulation were used as inlet boundary condition for the ducts in CFD program The use of CFD tool involve modeling of the ducts to conform with the stipulated shape and sizes as defined by KARI with a grid density that allows reasonable flow characteristics applicable to aircraft components. Respective values of Shaft horse power obtained by varying flight Mach number, Gas generator RPM and Altitude considering several losses inclusive of those estimated by use of CFD tool were then plotted at three conditions with the ECS-OFF, ECS-MAX and at un-installed condition. Reasonable results were obtained as a result of using computational fluid dynamics that can hence be justified as an alternative tool for use in future flow analysis of engine and components.

• 한국초전도ㆍ저온공학회논문지
• /
• 제19권2호
• /
• pp.29-32
• /
• 2017

The use of electronic devices such as mobile phones and tablet PCs has increased of late. However, the power which is supplied through wires has a limitation of the free use of devices and portability. Magnetic-resonance wireless power transfer (WPT) can achieve increased transfer distance and efficiency compared to the existing electromagnetic inductive coupling. A superconducting coil can be applied to increase the efficiency and distance of magnetic-resonance WPT. As superconducting coils have lower resistance than copper coils, they can increase the quality factor (Q-factor) and can overcome the limitations of magnetic-resonance WPT. In this study, copper coils were made from ordinary copper under the same condition as the superconducting coils for a comparison experiment. Superconducting coils use liquid nitrogen to keep the critical temperature. As there is a difference of medium between liquid nitrogen and air, liquid nitrogen was also used in the normal conductor coil to compare the experiment with under the same condition. It was confirmed that superconducting coils have a lower reflection-coefficient($S_{11}$) than the normal conductor coils.

• 한국농촌건축학회논문집
• /
• 제12권2호
• /
• pp.109-116
• /
• 2010

The purpose of this study is to clarify the actual condition of the daily living activities of the elderly with dementia in nursing homes. The thorough investigation and observation works were made from the view points of daily living behaviors and behavioral places of the recuperating elderly with dementia in nursing homes. This article discusses about the basic characteristics of the elderly and the actual condition of the daily living activities of the elderly with dementia in 3 nursing homes. The results of this study are summarized as follows; There is no wide difference between skilled nursing facilities on the characteristic of living behaviors of the elderly with dementia. Daily living activities and the use of spaces are largely influenced by the daily program and the operation policy of each nursing homes in addition to human relationship of the elderly with dementia. Common spaces such as day room, dining room plays an important role for their daily living activities, because that most of the elderly with dementia stay long during daytime. Layout of each private room and common space seems very crucial point in designing these facilities, in order to enable demented people to live their lives more independently.

• 한국식생활문화학회지
• /
• 제28권5호
• /
• pp.463-472
• /
• 2013

Beverages can vary in their appropriateness depending on the context of their different uses; therefore, an intention to consume a beverage is likely dependent on the context of its use. This study associated the consumer acceptability of commercial beverage products examined in a previous study (Kim and others, 2013) with its appropriateness under different use contexts. Consumers (n=360) were divided into two conditions: blind and brand. Consumers rated appropriateness for 13 use contexts for each beverage product. The results indicated that the contextual appropriateness were significantly different among the beverage samples and seemed to be positively influenced by the acceptability of beverages. The beverages with higher liking scores were more appropriate in a greater number of contexts, including "when tired", "refreshing", and "rest". However, there were inappropriate contexts (e.g., "while weight watching", "after exercise", "with a meal", and "health care") regardless of degree of acceptability. In the brand condition, some differences in contextual appropriateness were observed when comparing results from the blind condition (e.g., "with a meal", "health care").

• 한국조경학회지
• /
• 제26권3호
• /
• pp.34-44
• /
• 1998

The purpose of this study is to provide the basic data for land use in the future, which result from analyzing land use, obtained after studying on the natural environment by Geographic Information System and Remote Sensing. The results of this study are as follows : ·According to the classification of land-cover, agricultural land use is relatively prominent except for overall natural covering. According to the average value of Green Vegetation Index class, the average value of GVI is 3.0, and 45% of the regions have relatively good condition of floral state. ·With a view to natural environment, the survey shows that the altitude of 90% of the total areas is below 400m, and most of them are flattened or moderately-inclined area. Therefore, this region has a good condition to be used for development. · The area for the first class in preservation degree of natural scenery of Namcheon-Myun is 2.3% of the total areas. According to the results about unstable areas on all sides, unstable districs are distributed in so small-scale units that they will be safe from some damages drawn by developing activity. But we have to consider every aspects for the future development of them. In this study, the natural environment-variables are regarded firstly, and effective designation of the land with natural environment is researched too. However, to establish more practical developing plan, ecological and human variables should be regarded.

• The Plant Pathology Journal
• /
• 제27권1호
• /
• pp.78-84
• /
• 2011

Antagonistic rhizobacteria, more specifically fluorescent pseudomonads and certain species of Bacillus, are known as biocontrol agents of fungal root diseases of agronomic crops. In this study, 144 bacteria were isolated from cucumber rhizosphere and screened as potential biological control agents against Phytophthora drechsleri, the causal agent of cucumber root rot, in vitro condition. Non-volatile compounds of 23 isolates showed noticeable inhibition zone (> 30%) against P. drechsleri, whereas volatile compounds of 7 isolates could prevent more than 30% of the mycelial growth of the fungus. All promising isolates, except of Pseudomonas flourescens V69, promoted significantly plant growth under in vitro condition. P. flourescens CV69 and V11 exhibited the highest colonization on the root. Results of the greenhouse studies showed that a reduction in disease incidence by use of some strains, and particularly use of strains CV6 and V11 as a soil treatment, exhibited a reduction in disease incidence so that suppressed disease by 85.71 and 69.39% respectively. Pseudomonas flourescens CV6 significantly suppressed disease in comparison to Ridomil fungicide. The use of mixture bacterial strains in the soil inoculated by the fungus resulting in falling down the most of the plants which didn't show significant difference with infected control soils without bacteria.

• 한국자동차공학회논문집
• /
• 제20권6호
• /
• pp.61-66
• /
• 2012

Conventional method to transform vehicle driving condition to engine operation mode is to use vehicle road load under neutral gear and mechanical efficiency of drivetrain. But this method requires additional measurement of efficiency of drivetrain on a test rig. And this measurement is normally done at fixed speed and thus estimated accuracy of engine operation mode is not considered to be high enough. This study suggests new method to calculate engine operation mode for prescribed driving mode such as NEDC using vehicle coastdown test under gear engaged condition without measurement of mechanical efficiency of drivetrain. Coastdown test was done under neutral and gear engaged condition for comparison and also trial to extract mechanical loss of drivetrain was carried out. Calculated engine torque by conventional and newly suggested method was compared with actually measured torque of a vehicle on a chassis dynamometer during NEDC. Newly suggested method showed slightly higher accuracy of accumulated brake work during NEDC.

• 대한기계학회논문집A
• /
• 제21권5호
• /
• pp.835-841
• /
• 1997

Microscopic examination of the morphology of wear debris is an accepted method for machine condition and fault diagnosis. However wear particle analysis has not been widely accepted in industry because it is dependent on expert interpretation of particle morphology and subjective assessment criteria. This paper was undertaken to analyze the morphology of wear debris for machine condition diagnosis of the lubricated moving surfaces by image processing and analysis. The lubricating wear test was performed under different sliding conditions using a wear test device made in our laboratory and wear testing specimen of the pin-on-disk-type was rubbed in paraffine series base oil. In order to describe characteristics of debris of various shape and size, four shape parameters (50% volumetric diameter, aspect, roundness and reflectivity) have been developed and outlined in the paper. A system using such techniques promises to obviate the need for subjective, human interpretation of particle morphology in machine condition monitoring, thus to overcome many of the difficulties in current methods and to facilitate wider use of wear particle analysis in machine condition monitoring.

• 대한기계학회논문집
• /
• 제12권4호
• /
• pp.926-933
• /
• 1988

본 연구에서는 SIMPLER 알고리즘이 응용된 기존 2차원 타원형 프로그램을 수 정하여 압력값의 절대치가 지배방정식의 경계조건으로 사용될 수 있도록 하였으며 이 를 이용한 계산예로서, 청정실과 유사한 유로에서의 유체 유동을 수치적으로 해석하여 수정된 프로그램의 타당성을 입증하였다.

• Journal of Microbiology and Biotechnology
• /
• 제18권12호
• /
• pp.1958-1965
• /
• 2008

A denitrifying polyphosphate-accumulating bacterium (YKP-9) was isolated from activated sludge of a 5-stage biological nutrient removal process with step feed system. This organism was a Gram-negative, coccus-shaped, facultative aerobic chemoorganotroph. It had a respiratory type of metabolism with oxygen, nitrate, and nitrite as terminal electron acceptors. The 16S rRNA gene sequence of strain YKP-9 was most similar to the 16S rRNA gene sequence of Paracoccus sp. OL18 (AY312056) (similarity level, 97%). Denitrifying polyphosphate accumulation by strain YKP-9 was examined under anaerobic-anoxic and anaerobic-oxic batch conditions. It was able to use external carbon sources for polyhydroxyalkanoates(PHA) synthesis and to release phosphate under anaerobic condition. It accumulated polyphosphate and grew a little on energy provided by external carbon sources under anoxic condition, but did neither accumulate polyphosphate nor grow in the absence of external carbon sources under anoxic condition. Cells with intracellular PHA cannot accumulate polyphosphate in the absence of external carbon sources under anoxic condition. Under oxic condition, it grew but could not accumulate polyphosphate with external carbon sources. Based on the results from this study, strain YKP-9 is a new-type denitrifying polyphosphate-accumulating bacterium that accumulates polyphosphate only under anoxic condition, with nitrate and nitrite as the electron acceptors in the presence of external carbon sources.