• Journal of the Korean Society of Industry Convergence
• /
• v.14 no.3
• /
• pp.95-100
• /
• 2011

The modern society longing for the convenience of up-to-date technology, there are attempts of miniaturization and high reliance of power equipments in the effectiveness aspect of urban area's usage of space while requiring more electrical energy than now. Consequently, paper used to the Neral Network for a forcasting conservation system. A neral network is powerful asta modeling tool that is able to capture and represent complex input/output relationships. The true power and advantage of neral networks lies in their ability to learn these relationships directly from the data being modeled. Traditional linear models are simply inadequate when it comes to modeling data that contains non-linear characteristics. Form results of this study, the Neral Network is will play an important role for insulation diagnosis system of real site GIS and power eqipment using $SF_6$ gas.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.19 no.5
• /
• pp.523-529
• /
• 2009

Smart sensor is known as intelligent sensor, it is different with other conventional sensors in the case of intelligent system embedded on it. Smart sensor has many benefits e.g. low-cost in usage, self-decision and self-diagnosis abilities. This sensor consists of perception element(sensing element), signal processing and technology of communication. In this work, a bridge and structure of smart sensor has been investigated to be capable to condition monitoring routine. This investigation involves low power consumption, software programming, fast data acquisition ability, and authoritativeness warranty. Moreover, this work also develops smart sensor to be capable to perform high sampling rate, high resolution of ADC, high memory capacity, and good communication for data transfer. The result shows that the developed smart sensor is promising to be applied to various industrial fields.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.06a
• /
• pp.1518-1521
• /
• 2005

The application of focused ion beam (FIB) technology in micro/nano machining has become increasingly popular. Its usage in micro/nano machining has advantages over contemporary photolithography or other micro/nano machining technologies such as small feature resolution, the ability to process without masks and being accommodating for a variety of materials and geometries This paper focus to apply the sputtering technology accumulated by experiments to 3d structure fabrication with high resolution. Therefore some verifications and discussions of the characteristics of FIB sputtering results according to focal length were described in this paper. And we suggested the definition of rectangular pattern profile and made the verifications of sputtering results based on definition of it.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2002.05a
• /
• pp.110-116
• /
• 2002

In this paper, various kinds of A-Frame are surveyed and classified according to their functional ability and sizes. Based on the study, a A-Frame that is suitable for ROV/AUV operation is designed. Basic theoretical structural requirements are applied and relevant Finite Element Analysis are carried out for the verification of the sound workability of the proposed A-Frame. Final configuration and the specification are proposed for the usage of ROV/AUV operation.

• Journal of Korea Multimedia Society
• /
• v.8 no.12
• /
• pp.1638-1648
• /
• 2005

The SEM approach to PKl offers several advantages, such as immediate revocation of users' signing ability without CRLs and compatibility with the standard RSA. However, it has a weakness against denial of service attack caused by breaking down or being compromised. G. Vanrenen et al. proposed a distributed SEM approach to overcome the weaknesses. However, it does not provide the desirable properties such as instant availability and immunity against denial of service attack, due to inadequate usage of threshold cryptography and proactive secret sharing. In this paper, we point out its structural contradictions and propose a modified version of distributed SEM approach.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.59 no.9
• /
• pp.1621-1625
• /
• 2010

Recently, due to increase in the usage of toxic gas and inflammability gas, the ability to monitor and precisely measurement of these gases is crucial in preventing the occurrence of various accidents. CuO doped and undoped $WO_3$ thick films gas sensors were prepared using screen-printing method on alumina substrates. A structural properties of $WO_3$:CuO thick films had monoclinic phase and triclinic phase of $WO_3$ together. Sensitivity of $WO_3$:CuO sensor at 2000 ppm of $CO_2$ gas and 50 ppm of $H_2S$ gas was investigated. 4 wt% Cu doped $WO_3$ thick films had the highest sensitivity of $CO_2$ gas and $H_2S$ gas.

• Journal of the Korean Society of Combustion
• /
• v.11 no.4
• /
• pp.14-21
• /
• 2006

In this study, syngas which is reformed from fossil fuel and has hydrogen as a major component, was added to a gasoline engine to improve combustion stability and exhaust emissions of idle state. Syngas fraction of the total supplied fuel varied to 0 %, 25 %, 50 % with various ignition timing and excess air ratio. Combustion stability, exhaust emissions, fuel consumption and exhaust gas temperature were measured to investigate the effects of syngas addition on idle performance. Results showed that syngas has ability to widely extend lean operation limit and ignition retard range with dramatical reduction of engine out emissions. It is supposed that the usage of syngas in the internal combustion engine is an effective solution to meet the future strict emission regulations.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 1999.04a
• /
• pp.110-120
• /
• 1999

Topology optimization is used for determining the best layout of structural components to achieve predetermined performance goals. In the present study, we consider that the objective function is to maximize the natural frequency of the structure for a designated mode and the constraint function is to constrain a total material usage. In this paper, using a topology optimization technique based on the homogenized material and the chessboard prevention strategy, we obtain the optimal layout and the reinforcement of an elastic structure. Several examples are presented to show the ability of the topology optimization technique used in this paper to deal with an optimal layout problem for a free vibration structure.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.30 no.3
• /
• pp.565-568
• /
• 2001

A study was conducted to investigate cryoprotectant effect of commercially produced oligosaccharides (IMO: isomalto-oligosaccharides, FO: fructo-oligosaccharides and GO: galacto-oligosaccharides) on beef protein and to compare their effectiveness to sucrose or a mixture of sucrose and sorbitol on freezing. The optimal addition level of cryoprotectants was determined by measuring $Ca^{2+}$-ATPase activity of sample treated with different concentration (0 to 12%) after freeze-thaw cycle. Since the stabilization effect was not dramatically increased above 8% sugar concentrations, the 8% was determined as an usage level. During frozen storage (at -18$^{\circ}C$ for 12 week), commercially produced oligosaccharides showed lower cryoprotection ability than sucrose but higher than sucrose+sorbitol as measured by protein solubilities and $Ca^{2+}$-ATPase activities.

• Journal of Construction Engineering and Project Management
• /
• v.2 no.1
• /
• pp.20-26
• /
• 2012

Urban regeneration is a large-scale program that must address challenges such as a significant number of involved projects, diverse participants and their conflicting objectives, and a long life span. In an effort to address these issues, the Interactive Electronic Technical Manual (IETM) is applied to urban regeneration in order to provide a guideline to enhance urban regeneration program management. Through a survey, three major functionalities required in the IETM are identified: process map provision, customized information delivery, and communication ability with other information systems. To achieve these functionalities, the development framework of the IETM and the associated technologies are examined.Its characteristics can be sum up ontology-driven metadata, user-oriented process map composition system and so on. Finally, the usage scenarios of the IETM are discussed.