• 한국항해학회지
• /
• 제23권1호
• /
• pp.23-28
• /
• 1999

With a rapid progress in electronic industry we enjoy various conveniences of life. As many kinds of information equipments are supplied even to most of individuals as to be called an information society, we are exchanging much information with one another surprisingly. Consequently the occupation density of microwave frequency band is highly increased, and electromagnetic environment is getting more seriously bad. It often gives fatal blow to even human life and thus becomes serious social problems. Electromagnetic wave absorbers for anechoic chamber are needed to broaden the effective frequency bandwidth, reduce the thickness, and decrease the weight. There are various absorbers proposed for the above conditions, but they could not decisively solve it the alone requirements. The Electromagnetic wave absorber made by a conventional ferrite tile has, for example, broadened the useful frequency bandwidth by the way of forming air layer(practically use urethane foam, etc.) on the ferrite tile. Therefore, an air layer is formed between a reflection plate and a sintered Ni-Zn ferrite tile of 7 mm in thickness, which has reflectivity less than -20 dB from 30 MHz to 400 MHz in bandwidth. Accordingly, in this paper, a broadened electromagnetic wave absorber are designed, which has the reflection characteristics less than -20 dB from 30 MHz to 6,000 MHz in the bandwidth. Then we achieved the goal by design the inserting square Ferrite Cylinders with the thickness less than 17.5 mm on existing grid type Ferrite absorber. The purpose of this research is on the development of very wide-band electromagnetic absorber for a universal anechoic chamber for measuring radiated electromagnetic wave or immunity of electronic equipments, GTEM-cell, wall material for preventing TV ghost, etc.

• Asian Journal of Atmospheric Environment
• /
• 제6권3호
• /
• pp.206-221
• /
• 2012

Hazardous chemicals can be released from artificial turf used in some school playgrounds. To distinguish between Health risk assessment (HRA) exposure scenarios for this study, the ratio of elementary, middle and high schools was considered before final selection. Considering exposure pathways (inhalational, oral and dermal), media and materials were examined, targeting hazardous chemicals released from artificial turf playground-related products. Upon evaluation, the quantity of infill chips was shown to exceed the domestic product content standard (90 mg/kg) at eight (16%) out of 50 schools. PAHs were shown to exceed standards (10 mg/kg) at two (4%) out of the 50 schools. The excess cancer risk (ECR) of carcinogens was shown to be $1{\times}10^{-6}$ in most users for the worst exposure scenario. In children with pica, who represented the most extreme exposure group, the ECR was expected to be as high as $1{\times}10^{-4}$, showing the low risk level of carcinogens. The hazard index (HI) for individual chemicals was shown to be low, at around 0.1 or less, except for children with pica, according to the mean exposure scenario of artificial turf playground exposure. However, the HI was shown to exceed 1.0 in children with pica. Therefore, no direct health risk was found in using artificial turf playgrounds and urethane flooring tracks for the mean exposure scenario, except in children with pica.

• The Korean Journal of Physiology and Pharmacology
• /
• 제15권6호
• /
• pp.437-443
• /
• 2011

Salt signals in tongue are relayed to the nucleus of the solitary tract (NST). This signaling is very important to determine whether to swallow salt-related nutrition or not and suggests some implications in discrimination of salt concentration. Salt concentration-dependent electrical responses in the chorda tympani and the NST were well reported. But salt concentration-dependency and spatial distribution of c-Fos in the NST were not well established. In the present study, NaCl signaling in the NST was studied in urethane-anesthetized rats. The c-Fos immunoreactivity in the six different NST areas along the rostral-caudal axis and six subregions in each of bilateral NST were compared between applications of distilled water and different concentrations of NaCl to the tongue of experimental animals. From this study, salt stimulation with high concentration (1.0 M NaCl) induced significantly higher c-Fos expression in intermediate NST and dorsal-medial and dorsal-middle subregions of the NST compared to distilled water stimulation. The result represents the specific spatial distribution of salt taste perception in the NST.

• 접착 및 계면
• /
• 제18권3호
• /
• pp.134-140
• /
• 2017

본 연구에서는 포호필름 코팅 용도를 목적으로 silicone-urethaneacrylate (SUA) 올리고머를 포함하는 자외선 경화형 점착제를 제조하였으며 SUA올리고머의 양과 자외선조사량이 접착물성에 미치는 영향을 조사하였다. 그 결과, 올리고머의 양과 자외선조사량이 증가 할 수 록 박리강도는 감소하였으나 응집력은 증가하였다. 자외선 조사가 시작되면서 젤함량은 초기에 급속히 증가하였으나 이후 일정량을 유지하였다. 탈착시험 결과 70%의 올리고머 함량의 시편 S70이 다른 S50(올리고머 50%함량)과 S60(올리고머 60%함량)과 비교하여 가장 우수한 탈착성을 보였으며 탈착 후 기재에 아무런 잔사를 남기지 않았다. S70의 경우 1857 자외선 조사량과 $2270mJ/cm^2$에서 $26mJ/m^2$ 이하의 표면에너지를 보였으며 95% 이상의 광투과도를 보였으며 이러한 물성은 보호용 필름이 요구하는 물성에 적절하다.

• 대한기계학회논문집A
• /
• 제34권6호
• /
• pp.675-681
• /
• 2010

중간엽 줄기세포(MSCs)는 미분화 상태의 세포로써, 섬유아세포, 연골아세포, 골아세포 등으로 분화하여 인체의 근골격계를 구성하며, 기계적 자극은 중간엽 줄기세포 분화를 결정하는 중요한 인자로 알려져 이다. 본 연구에서는, 세포가 생존하기 위한 환경을 제공하고, 세포가 기계적 자극조건에 따라 분화할 수 있도록 하는 바이오리엑터를 제안하엿다. 또한, 중간엽 줄기세포를 배양하기 위한 세포 지지체로써 PU(polyurethane)로 제작된 지지체를 제안하였다. 세포 분화를 확인하기 위하여, 중간엽 줄기세포를 PU 지지체에 seeding한 후, 바이오리엑터를 이용하여 기계적 자극에 의한 세포의 분화를 확인하였다.

• 대한기계학회논문집A
• /
• 제35권5호
• /
• pp.567-574
• /
• 2011

알미늄 압출재는 고속열차의 경량화를 위하여 기존의 주름강판을 대체하여 널리 사용된다. 알미늄 압출재는 고속열차 적층재 가운데 가장 큰 차음 기여도를 보이나, 동일한 중량의 평판과 비교할 때, 국부공진 주파수 대역에서 투과손실이 크게 떨어진다. 이 연구에서는 차세대 400km/h급 고속철도 차량용 알미늄 압출재를 대상으로 차음 문제를 검토하고, 차음성능의 향상 방안을 제시한다. 코어 구조를 변경시켜 국부공진 대역을 높이고, 우레탄 폼을 코어에 충진시킬 때의 차음성능 향상효과를 실험적으로 확인한다. 최종적으로 제시된 방법이 바닥 적층재의 총 투과손실을 어느 정도 개선시키는가를 평가한다.

• Bulletin of the Korean Chemical Society
• /
• 제32권2호
• /
• pp.559-565
• /
• 2011

The following noble series of statistical copolymers, poly[(2-(3-thienyl)ethanol n-butoxycarbonylmethylurethane)-co-3-hexylthiophene] (PURET-co-P3HT), were synthesized by the chemical dehydrogenation method using anhydrous $FeCl_3$. The structure and electro-optical properties of these copolymers were characterized using $^1H$-NMR, UV-visible spectroscopy, elemental analysis, GPC, DSC, TGA, photoluminescence (PL), and cyclic voltammetry (CV). The statistical copolymers, PURET-co-P3HT (1:0, 2:1, 1:1, 1:2, 1:3), were soluble in common organic solvents and easily spin coated onto indium-tin oxide (ITO) coated glass substrates. Hybrid bulk heterojunction photovoltaic cells with an ITO/G-PEDOT/PURET-co-P3HT:PCBM:Ag nanowires/$TiO_x$/Al configuration were fabricated, and the photovoltaic cells using PURET-co-P3HT (1:2) showed the best photovoltaic performance compared with those using PURET-co-P3HT (1:0, 2:1, 1:1, 1:3). The optimal hybrid bulk heterojunction photovoltaic cell exhibits a power conversion efficiency (PCE) of 1.58% ($V_{oc}$ = 0.82 V, $J_{sc}$ = 5.58, FF = 0.35) with PURET-co-P3HT (1:2) measured by using an AM 1.5 G irradiation (100 mW/$cm^2$) on an Oriel Xenon solar simulator (Oriel 300 W).

• 청정기술
• /
• 제20권3호
• /
• pp.277-282
• /
• 2014

본 연구에서는 EVA를 바인더로 사용하여 우레탄 폼(PU)에 LMO를 고정화한 PU-LMO를 제조하였다. XRD 및 SEM 분석을 통해서 EVA에 의해 LMO가 폴리우레탄에 잘 고정화된 것을 확인할 수 있었다. PU-LMO를 제조시에 EVA/LMO의 최적비율은 0.26이었다. PU-LMO에 의한 리튬이온의 흡착 속도는 유사 2차 속도 모델식에 잘 부합하였다. 평형실험 데이터는 Langmuir 흡착 등온식에 잘 적용되었으며, 최대 흡착량은 17.09 mg/g이었다. PU-LMO는 리튬이온에 대한 분배계수($K_d$)가 다른 금속들의 $K_d$ 값에 비해 높게 나타나 뛰어난 리튬 이온 선택성과 높은 흡착량을 보였다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2010년도 춘계학술대회 논문집
• /
• pp.640-649
• /
• 2010

Coarse granular materials such as gravel and crushed stone have been used as an important fill materials to large soil structure of railway, road, dam and so on. Although much studies for general soil materials have been carried out domestically, the studies for coarse materials were insufficient. Particularly, it is the level in which the study for dynamic properties(Elastic modulus and damping ratio) of coarse materials, applies the foreign country literature. This is due to the lack of large equipment for element test. But large soil structures made of coarse granular materials are generally important infrastructures. Therefore, the reliable design parameters for coarse materials should be obtained for safe and economic design, construction and maintenance. Triaxial test is the laboratory test method that is capable of controlling a confining pressure and boundary condition. In this project, we made a multi-purpose large triaxial testing system. This testing system is able to test coarse granular materials with maximum particle diameter of 100mm and support both the load control and displacement control. The load cell is installed inside of triaxial cell and the axial displacement is measured locally in order to control and measure more accurately in the small strain level. The verification test of this testing system was carried out with urethane verification specimens. So, from now on the useful information for coarse granular materials are expected to suggested by performing many tests with various material and condition.

• Elastomers and Composites
• /
• 제43권3호
• /
• pp.173-182
• /
• 2008

고무나 우레탄과 같은 고 탄성력을 이용하여 튜브를 임의의 형상으로 성형하는 고 탄성체 성형방법은 타 공정에 비해 높은 치수 정밀도와 생산 공정의 단축, 에너지 절감 등을 기대할 수 있는 차세대 성형기술이라 할 수 있다. 본 연구에서는 탄성체에 대한 소재 물성시험과 특성평가를 통해 고 탄성체 성형에 적합한 소재를 선정하고 시험으로 얻어진 응력-변형률을 이용하여 비선형 재료상수를 결정하여 성형해석에 필요한 물성 데이터를 확보하였다. 또한, 랙튜브에 대한 유한요소해석을 통해 탄성체의 두께변화에 따른 공정변수의 영향을 검토하였다.