• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.36 no.4
• /
• pp.449-455
• /
• 2012

During the measurement of the flow rate of gases such as natural gas, flow hunting is observed in most orifice meters but the intensity of flow hunting at each metering system shows different characteristics. In order to investigate why such a difference occurs and whether the difference actually influences metering error, pipeline network analysis on the main factors and characteristics of flow hunting was carried out in a previous study. Following this, in this study, computational fluid dynamics (CFD) analysis was carried out to clarify the relation between flow instability and flow hunting and determine the factors influencing the orifice meter depending on the intensity of upward pressure fluctuation, time interval, and flow rate. Finally, we showed that the pressure hunting rate is a function of the ratio of the pressure difference before and after an orifice meter. On the basis of CFD analysis results, we also presented some major factors and relations influencing flow hunting.

• Korean Journal of Applied Biomechanics
• /
• v.18 no.2
• /
• pp.29-39
• /
• 2008

This study was to provide for Tippelt technique which was a basic technique used in parallel bars. The program was applied to players for 8 weeks. Then it was analyzed by using 3Dmotion Analysis system to seek the difference between before and after using the program. Moreover establish the improvement and trait for newly made program. The program was made up of down-swing, up-swing and composite connection-phase training. Through down-swing training, shoulder angle made extension and chest closed quickly. As a result, players' performance have improved. Through up-swing training, legs kicking to vertical direction and trunk stood up fastly. As a result, players' performance have improved. When going upward, the center of mass must be in control not to have a lot of movement and hip angle extension using the bar is very positive coaching. When coaching composite connection in training from down-swing to up-swing, must have enough air phase time using center of mass vertically to have extension of leg. As a result, players' performance have improved by having increase of air phase time.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.30 no.4
• /
• pp.251-262
• /
• 1994

The speed of vertical migration and the volume backscattering strength of the scattering layers during the evening and morning transitions between day and night were measured in November 1990-1992 in thermally stratified waters of the East China Sea. Acoustical measurements were carried out using a scientific echo-sounder operating at t재 frequencies of 25 and 100kHz, and using an echo-integration system connected with a micro-computer. Biological sampling was accomplished by bottom trawling to identify fish species recorded on the echo sounder, and the species and length compositions were determined. The values of scattering strength were allocated to group of fishes according to the fish traces on the echo recording paper and the species composition of trawl catches. The vertical velocities of migration derived from the changes in the depths and the values of peak scattering strength of the dense layer vertically migrating toward the bottom or toward the surface. The trawl data suggest that snailfish and fishing frog were the most abundant fishes in all research stations. As sunrise approached, the fish formed a strong concentration just above the thermocline. The the highest values of scattering strength in the entire water column appeared in the depth strata above the thermocline just before the begining of downward migration. As soon as the fish began to migrate downwards across the thermocline, the values of the scattering strength in the depth strata above the thermocline rapidly decreased, while the values for the scattering layer moving slowly toward the bottom gradually increased. During the 1992 surveys, the speed of the vertical migration was estimated to be 0.38m/min in the upward migration and 0.32m/min in the downward migration, respectively. That is the rate of vertical migration was slightly higher at dusk than at dawn. Similar migration patterns were observed on different stations and under different weather conditions during the surveys in 1990.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.16 no.4
• /
• pp.364-374
• /
• 2006

Natural ventilation technique could be the substitute for or the complement to the local exhaust ventilation system in the sense of protecting work environment. Moreover, it has many strong points ; almost no mechanical parts, no energy use and no noise. If applied appropriately, it could have the very high ventilation rate and save a lot of energy expense. But, it depends on the outdoor environment, especially temperature and wind speed/direction. Predicting the capacity of natural ventilation is not an easy job because it comes from both buoyancy and wind effect. Another problem is too much flow through the ventilator especially in winter time due to too much difference between indoor and outdoor temperature. Thus some ventilators in industries are sealed by door or plastic sheet, resulting in bad work environment. Various types of dampers are used to control the flow rate through ventilators. The capabilities of flow control by damper has not been estimated. In addition, it was not tested whether the damper could obstruct the flow through ventilator when fully opened. To answer these questions, 4 types of dampers were tested by using computational fluid dynamics. 10 different configurations includes no damper, full open and half open. Flow rates were estimated and airflow fields were analysed to clarify the before-mentioned questions. The dual type damper was the best choice for controling the capability of ventilator. In addition, the upward grill type damper was the best for not obstructing the air flow when fully opened.

• Journal of Korean Society of Steel Construction
• /
• v.14 no.6
• /
• pp.711-720
• /
• 2002

A 3-D numerical model, which could demonstrate the static and dynamic responses of a curved bridge more precisely with the moving vehicles, was developed The dynamic response induced by the centrifugal rolling motion of vehicle was identified according to the variations of the partial grade and the curvature of the slab. Dynamic characteristics of the curved bridge with the moving vehicle were analyzed under the condition of support types and two different support systems. Parametric studies were conducted to compare the efficiency of load distribution in the curved bridge. In general, while the vehicle was crossing the curved bridge, negative reaction occurred in the inside of the girder. The final result showed that the support system located outside the girder was more advantageous than other systems, and the characteristics of load distributions differed from the others in the various conditions of support systems.

• Journal of Korean Society on Water Environment
• /
• v.26 no.6
• /
• pp.895-902
• /
• 2010

The effect of seasonality on water quality variation is very significant. Generally, it reduce the power of the trend extraction. A parametric time-series model was used for detecting trends in historic constituent concentration data. The effect of seasonality is able to remove from time series decomposition technique. According to such statistic methode, long-term water quality trend analysis system (NTrend 1.0) was developed by Nakdong River Water Environmental Research Center. The trend analysis of BOD variation was conducted with NTrend 1.0 at Goreong and Moolkum site in Nakdong river to show the effect of water quality management action plan. Power test of trend extraction was tried each case of 'deseasonalized and deannulized' data and 'deseasonalized' data. Analysis period was from 1989 to 2006, and it's period was divided again three times, 1989~1993, 1994~1999 and 2000~2006 according to action plan period. The BOD trend was downward in Goreong site during three times and it's trend slope was very steep, and upward in Moolkum during 1989~1993, but it was turned downward during 1994~1999 and 2000~2006. It was revealed that it's very effective to reduce the concentration of BOD by water quality management action plan in that watershed. The result of power test was shown that it is high for trend extraction power in case of 'deseasonalized' data.

• Korean Journal of Microbiology
• /
• v.27 no.3
• /
• pp.169-175
• /
• 1989

To study the role of mutant precore region in expression and secretion of hapatitis B viral core antigen, we have cloned core antigen gene(HBc) with or without precore region in geterologous expression vectors containing SV40 promoter, yeast promoter, and lambda $P_{L}$ promoter. In COS cells transfected with plasmid containing C-gene with precore region, antigens were detected in both cell extract and cultured medium. However, in the cells transfected with plasmids containing C-gene without precore or with mutated precore region by one nucleotide (T) addition at the nucleotide 1,821, HBcAg was detected only in cell extracts. These results support that the mutation by one nucleotide addition shifted the initiation codon of precore region to 53 nucleotides upward and the elongated precore region also played a major role in the secretion of HBcAg in mammalian cells. In the case of yeast and E. coli, HBcAg was detected only in cell extracts in spite of the presence of precore region, which suggest that precore region could not affect HBcAg secretion in these system.

• Korean Journal of Applied Biomechanics
• /
• v.21 no.2
• /
• pp.243-252
• /
• 2011

The purpose of this study was to determine the effect of trunk posture on muscle activity and motion of scapular and scapulohumeral rhythm. Thirty-one healthy subjects performed right-arm abduction and adduction along the frontal plane while standing in both upright and flexed posture of trunk. Scapular upward rotation, anterior tilting and internal rotation ware recorded using a motion analysis system and muscle activity of upper trapezius, lower trapezius and serratus anterior ware recorded using surface electromyography during abduction and adduction in both trunk postures. then, scapulohumeral rhythm was calculated. Scapulohumeral rhythm and scapular posterior tilting in flexed posture was significantly decreased than in upright posture. Also, muscle activity of lower trapezius in flexed posture was significantly increased and serratus anterior was significantly decreased than in general posture. The result of this study revealed that flexed posture of trunk altered the muscle activity and kinematic of scapular. Measurement of trunk posture should be included the evaluation of dysfunction and disorder of shoulder girdle since rehabilitation of trunk posture is important to restore of upper limbs function.

• Journal of Advanced Navigation Technology
• /
• v.15 no.5
• /
• pp.833-838
• /
• 2011

X-ray device used in the diagnosis has made possible to have more effective and accurate diagnosis, powered by the development of various devices. Based on this, X-ray device has become the most basic and essential diagnostic equipment in clinical medicine. At present, in the image acquisition field using X-ray, the use of Digital radiography which is useful in the acquisition time reduction and transfer of images and is possible to have the dose reduction has expanded. With the structure using one detector, this DR device has disadvantages in that it needs structural changes unlike existing X-ray and the detector should be moved to the desired position depending on the shooting location. Therefore, in this study, using BLDC(Brushless direct current) motor and PID(Proportional integral differential) control method, the automatic control system of 3-axis which is upward and downward, left and right and rotation of detector where having the most movement in DR was designed and produced and its performance was evaluated.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.14 no.12
• /
• pp.1322-1329
• /
• 2004

End-milling has been used widely in industrial system because it is effective to a material manufacturing with various shapes. Recently the end-milling processing is needed the high-precise technique with good surface roughness and rapid time in precision machine part and electronic part. The optimum mechanical vibration of main spindle, surface roughness and cutting temperature have an effect on end-milling condition such as, cutting direction, revolution of spindle, feed rate and depth of cut, etc. Therefore, this study carried to decide the working condition for optimum mechanical vibration of main spindle, surface roughness and cutting temperature using design of experiments, ANOVA and characteristic function. From the results of experimentation, mechanical vibration has an effect on revolution of spindle, radial depth of cut, and axial depth of cut. The surface roughness has an effect on cutting direction, revolution of spindle and depth of cut. And then the optimum condition used design of experiments is upward cutting In cutting direction, 600 rpm in revolution of spindle, 240 mm/min in feed rate, 2 mm in axial depth of cut and 0.25 mm in radial depth of cut. By design of experiments and characteristic function, it is effectively represented shape characteristics of mechanical vibration, surface roughness and cutting temperature in end-milling.