• 반도체디스플레이기술학회지
• /
• 제21권4호
• /
• pp.86-91
• /
• 2022

Cache bypassing is a scheme to prevent unnecessary cache blocks from occupying the capacity of the cache for avoiding cache contamination. This method is introduced to alleviate the problems of non-volatile memories (NVMs)-based memory system. However, the prior works have been studied without considering wear-out attack. Malicious writing to a small area in NVMs leads to the failure of the system due to the limited write endurance of NVMs. This paper proposes a novel scheme to prolong the lifetime with higher resistance for the wear-out attack. First, the memory reference pattern is found by modified reuse distance calculation for each cache block. If a cache block is determined as the target of the attack, it is forwarded to higher level cache or main memory without updating the NVM-based cache. The experimental results show that the write endurance is improved by 14% on average and 36% on maximum.

• 한국정보통신학회논문지
• /
• 제26권3호
• /
• pp.483-486
• /
• 2022

Real time data exchange and information transmission are becoming more and more important these days. The concept of age of information (AoI) was proposed to quantify the freshness of information about the status of a remote source system. The AoI is defined as the amount of time that a packet experiences since it was generated at the source up to now. This paper analyses the age of information for a discrete time Geo/Geo/1/1 status updating system. The stationary probability distribution for peak AoI is obtained. Freshness ratio of information is also derived. Some numerical results obtained by the analysis are presented.

• 한국정보처리학회:학술대회논문집
• /
• 한국정보처리학회 2009년도 춘계학술발표대회
• /
• pp.846-848
• /
• 2009

The interest in the access and integration of distributed massive data resources has increased recently. This paper presents the Advanced Collection Manager(CM) service with OGSA-DAI component which can access and integrate the distributed data resources. The Advanced CM service supports the data resource of various types. And it can provide the query, updating, transforming and delivering data via cooperating with other services in Grid Information Retrieval(Grid-IR or GIR) System. As a result, it can access and manage the data resource more flexible and efficient.

• International Journal of Internet, Broadcasting and Communication
• /
• 제16권2호
• /
• pp.161-168
• /
• 2024

As the size of big data models grows, distributed training is emerging as an essential element for large-scale machine learning tasks. In this paper, we propose ParamHub for distributed data training. During the training process, this agent utilizes the provided data to adjust various conditions of the model's parameters, such as the model structure, learning algorithm, hyperparameters, and bias, aiming to minimize the error between the model's predictions and the actual values. Furthermore, it operates autonomously, collecting and updating data in a distributed environment, thereby reducing the burden of load balancing that occurs in a centralized system. And Through communication between agents, resource management and learning processes can be coordinated, enabling efficient management of distributed data and resources. This approach enhances the scalability and stability of distributed machine learning systems while providing flexibility to be applied in various learning environments.

• 한국측량학회지
• /
• 제25권6_2호
• /
• pp.635-643
• /
• 2007

국내에 고해상도 지도제작용 항공디지털카메라 영상의 도입 및 공급이 현실화됨에 따라 항공디지털카메라 영상을 이용한 수치지도의 제작 및 갱신에 많은 관심이 모아지고 있다. 본 연구는 푸쉬부룸 항공디지털카메라 영상을 이용하여 기존의 1/1,000 수치지도의 갱신방법을 제시하고자 하였다. GPS측량성과를 이용하여 기하보정을 수행하고, 수치도화를 위해 수치사진측량시스템을 이용하였다. 수치도화는 건물 및 도로를 묘사하였고, GPS측량성과를 이용하여 절대위치정확도 평가와 해석도화에 의해 제작된 수치지도를 이용하여 상대위치정확도 평가를 수행하였다. 절대위치정확도 평가결과, RMSE가 X, Y축으로 각각 ${\pm}0.172m,\;{\pm}0.127m$, 평균거리오차는 0.208m, 상대위치정확도 평가결과, RMSE가 X, Y축으로 각각 ${\pm}0.238m,\;{\pm}0.281m$, 평균거리오차는 0.337m로 나타났다. 따라서, 본 연구에서 제시한 항공디지털카메라 영상을 이용한 수치지도 갱신방법은 국토지리정보원 규정의 허용오차 이내였으므로, 향후 국가기본도 제작은 물론 지자체의 GIS사업 및 다양한 분야에 활용할 수 있다.

• 한국항공우주학회지
• /
• 제42권8호
• /
• pp.692-700
• /
• 2014

본 논문에서는 미소진동 영향성 예측을 위한 인공위성 유한요소모델 보정에 관해 기술한다. 최근 지구 저궤도에 발사되는 상업용 지구관측위성의 경우, 수요자의 요구로 인해 주어진 시간 안에 다양한 지역의 많은 영상을 공급해야 한다. 이를 구현하기 위해 고용량휠, 다축 김발을 탑재한 안테나 등 다양한 구동기를 사용한다. 그러나 이러한 구동기는 작동 시 미소진동을 유발할 수 있으며, 이러한 미소진동은 매우 작기는 하지만 지구관측 탑재체를 가진하여 영상품질을 저감시킬 수 있다. 이러한 미소진동에 의한 영향성을 살펴보기 위해서 유한요소모델과 미소진동원 시험결과를 결합한 연성해석을 실시하며, 해석에 앞서 유한요소모델 보정을 실시한다. 보정 전후의 주파수 차이, 모드형상 상관관계, 주파수응답함수 상관관계를 비교하여 개선된 유한요소모델의 품질을 평가하였다.

• 한국해양공학회지
• /
• 제17권6호
• /
• pp.83-90
• /
• 2003

This paper presents an underwater hybrid navigation system for a semi-autonomous underwater vehicle (SAUV). The navigation system consists of an inertial measurement unit (IMU), and a Doppler velocity log (DVL), accompanied by a magnetic compass. The errors of inertial measurement units increase with time, due to the bias errors of gyros and accelerometers. A navigational system model is derived, to include the scale effect and bias errors of the DVL, of which the state equation composed of the navigation states and sensor parameters is 20. The conventional extended Kalman filter was used to propagate the error covariance, update the measurement errors, and correct the state equation when the measurements are available. Simulation was performed with the 6-d.o,f equations of motion of SAUV, using a lawn-mowing survey mode. The hybrid underwater navigation system shows good tracking performance, by updating the error covariance and correcting the system's states with the measurement errors from a DVL, a magnetic compass, and a depth sensor. The error of the estimated position still slowly drifts in the horizontal plane, about 3.5m for 500 seconds, which could be eliminated with the help of additional USBL information.

• 천문학논총
• /
• 제21권2호
• /
• pp.81-86
• /
• 2006

Even though 30inch optical telescope at Kyung Hee Astronomy Observatory has been used to produce a series of scientific achievements since its first light in 1992, numerous difficulties in operating of the telescope have hindered the precise observations needed for further researches. Since the currently used PC-TCS(Personal Computer based Telescope Control System) software based on ISA-bus type is outdated, it doesn't have a user friendly interface and make it impossible to scale. Also accumulated errors which are generated by discordance from input and output signals into a motion controller required new control system. Thus we have improved the telescope control system by updating software and modifying mechanical parts. We applied a new BLDC(brushless DC) servo motor system to the mechanical parts of the telescope and developed a control software using Visual Basic6.0. As a result, we could achieve a high accuracy in controlling of the telescope and use the user friendly GUI(Graphic User Interface).

• Structural Engineering and Mechanics
• /
• 제81권6호
• /
• pp.737-750
• /
• 2022

Timber-Concrete Composite construction system consists of combining timber beam or deck and concrete with different connectors. Different fastener types are used in Timber-Concrete Composite systems. In this paper, the effects of two types of fasteners on structural behavior are compared. First, the notches were opened on timber beam, and combined with reinforced concrete slab by fasteners. This system is called as Notched Connection System. Then, timber beam and reinforced concrete slab were combined by new type designed fasteners in another model. This system is called as Notched-Slab Approach. Two laboratory models were constructed and bending tests were performed to examine the fasteners' effectiveness. Bending test results have shown that heavy damage to concrete slab occurs in Notched Connection System applications and the system becomes unusable. However, in Notched-Slab Approach applications, the damage concentrated on the fastener in the metal notch created in the slab, and no damage occurred in the concrete slab. In addition, non-destructive experimental measurements were conducted to determine the dynamic characteristics. To validate the experimental results, initial finite element models of both systems were constituted in ANSYS software using orthotropic material properties, and numerical dynamic characteristics were calculated. Finite element models of Timber-Concrete Composite systems are updated to minimize the differences by manual model updating procedure using some uncertain parameters such as material properties and boundary conditions.

• 한국정보처리학회:학술대회논문집
• /
• 한국정보처리학회 2011년도 춘계학술발표대회
• /
• pp.1218-1221
• /
• 2011

The development of the internet and information management has enabled new applications which include: Electronic medical record (EMR), intelligent transportation, environmental monitoring, etc. In this paper, we design and implement the Continuity Care Record(CCR) Data Stream management server that compiled with DSMS and DBMS in EMR system for processing, monitoring the incoming CCR data stream and storing the processed result with high-efficiency. The proposed system enables users not only to query stored CCR information from DBMS, but also enables to execute continue query for the real-time CCR Data Stream. By using of CCR Viewer Application users can view or update their personal health records even compare self health care records with standard health care records in order to monitor the healthy status, and the on line updating information would be minimized and medical error.