• Proceedings of the KIPE Conference
• /
• 2012.07a
• /
• pp.311-312
• /
• 2012

Blade pitch control system monitors and adjusts angle of the blades and controls rotation speed of blades. This paper shows 2MW pitch system hardware and electric part. Blade pitch system consists of pitch drive, gear box, motor and energy storage. Fieldbus is base on CANopen protocol. Fail-Safe system moves the blades to a safety position in case of any fault condition. The super capacitor energy storage provides emergency back up to the Pitch servo driver during feathering the blades. This paper studied Blade pitch servo driver and a bi-directional DC-DC converter for fail-safe system.

• Proceedings of the KIPE Conference
• /
• 2012.07a
• /
• pp.43-44
• /
• 2012

비 절연형 PCS를 사용하였을 때 절연을 할 수 없기 때문에 안전에 대한 위험이 있고 손실이 커서 전체적인 효율이 낮다. 본 논문에서 듀얼 풀 브릿지 컨버터를 사용하여 구현하였다. 각 소자들의 전압, 전류 정격을 줄일 수 있으며 전기적인 절연으로 인하여 안전하다. 또한 승압 비가 홀로 사용했을 때 보다 높으며 고주파 변압기의 턴비를 줄일 수 있다. 본 논문은 1.5[kW]급 듀얼 풀 브릿지 컨버터와 단상 인버터를 이용한 PCS를 설계하고 설계한 파라미터를 구현하여 실험을 통해 검증하였다.

• Proceedings of the KIEE Conference
• /
• 1993.07b
• /
• pp.821-824
• /
• 1993

This paper deals with a $3{\phi}$ rectifier unit for telecommunication system. The rectifier unit is developed to Cope with the step-up of the AC input voltatage from 220V to 380V. By using a buck-type converter in the front-end, it keeps the input power factor high and reduces the voltage ripple in the dc output. It also has a very wide voltage regulation range, which lets the unit be applied for both the 220V and 380V input system. The study includes the power conversion scheme, control strategy, snubber circuit and finally, experimental results.

• Proceedings of the KAIS Fall Conference
• /
• 2003.06a
• /
• pp.267-270
• /
• 2003

All artificial infernal organs which are using electric energy supply energy with inductive couple. Transcutaneous energy transmission system enhance survival chance of the patients and quality of life by reducing volume and mass. In this research, we used both tune in transmission system in state of fixing cycle in order to increase the voltage gain and the current gain and to reduce effect of leakage inductance. Also to maximize the effect of resonance, a constant frequency duty cycle control method is used. Test is progressed with litz wire which is set up with various sizes of core to minimize size of converter. This research aimed in analysis of transcutaneous energy transmission system and in measuring of stability and efficiency of Lithium-ion battery charge which are using transmitted energy.

• Proceedings of the KIPE Conference
• /
• 2015.11a
• /
• pp.27-28
• /
• 2015

In this paper a high efficiency wireless on-board charger for Electric Vehicle (EV) is proposed and the theoretical analysis based on the two-port network model to come up with suitable design for the battery charge application is presented. The proposed Wireless Power Transfer (WPT) method has adopted four-coil system with air core and its superior performance is proved by comparing it to the conventional two-coil system by the mathematical analysis. In addition, since the proposed WPT converter is able to operate at an almost constant frequency regardless of the load, CC/CV charge of the battery can be simply implemented. A 6.6kW prototype is implemented with 20cm air gap to prove the validity of the proposed method. The experimental results show that the dc to dc conversion efficiency of the proposed system achieves 97.08% at 3.7 kW.

• Proceedings of the KIPE Conference
• /
• 2016.11a
• /
• pp.117-118
• /
• 2016

본 논문은 입력 전류 리플이 없고 낮은 스위치 전압 스트레스를 갖는 고승압 부스트-세픽 DC-DC 컨버터를 제안한다. 제안된 컨버터는 부스트 단의 보조회로에 의해 입력 전류 리플이 상당히 제거되었으며 세픽 단에 결합 인덕터를 적용하여 높은 전압 이득을 달성하였다. 또한 스위치 전압 스트레스는 클램핑 회로에 의해 감소되었으며 따라서 상대적으로 낮은 $R_{ds(on)}$ 갖는 MOSFET을 사용하여 컨버터의 효율이 개선되었다. 추가적으로 결합 인덕터의 누설 인덕터로 인하여 출력 다이오드의 역회복 손실이 완화되었다. 제안된 컨버터는 이론적 해석과 200[V]-200[W]하드웨어 시작품을 제작하여 검증하였다.

• Proceedings of the KIPE Conference
• /
• 2010.11a
• /
• pp.248-249
• /
• 2010

This paper describes development of hardware simulator for the PMSG(Permanent Magnet Synchronous Generator) wind power system, which was designed using real wind data. The simulator consists of a realistic wind turbine model using anemometer, vector drive, induction motor. The turbine simulator generates torque and speed signals for a specific wind turbine with respect to given wind speed. This torque and speed signals are scaled down to fit the input of 3kW PMSG. The PMSG-side converter operates to track the maximum power point and the grid-side inverter controls the active and reactive power supplied to the grid. The operational feasibility was first verified by computer simulations with PSCAD/EMTDC. The feasibility of real system implementation was confirmed through experimental works with a hardware set-up.

• Proceedings of the KSR Conference
• /
• 2008.11b
• /
• pp.619-625
• /
• 2008

Electrical Power supply System conditions of korea high speed train consists of main transformer, four AC-DC PWM converter of Auxiliary Block, Battery Charger in Power Car and Trailer Car, Trailer Inverter, Auxiliary inverter. Main transformer, at nominal voltage of 25kv supplied to secondary winding nominal output Voltage 383Vac, The Auxiliary block consists of AC-DC converters for generating 670VDC power, Auxiliary inverters for ventilation and air compressor, Trailer car inverter provide three phase power supplies at 440Vac for air conditioning and heating. The Battery charger Trailer and Power car supplies 72VDC all necessary equipment to energize the trainset equipment and suppy essential control. This Paper introduces the combined test results of the power supply system for korea high speed train. The main purpose of this combined test is to verify the performance of the power supply system that is designed to operate up to full load test.

• Journal of the Semiconductor & Display Technology
• /
• v.16 no.2
• /
• pp.85-88
• /
• 2017

In this paper, we have designed and fabricated a RF-DC voltage multiplier for 5.8GHz microwave wireless power transmission. In order to obtain higher voltage, the RF-DC voltage multiplier with 10 diodes (D-10) and the receiver module with an antenna and BPF (Band Pass Filter) was manufactured. The measured and compared results show that the voltages of the proposed one are lower than those of the previous tripler module up to 40cm. However, the voltage of the proposed one with the voltage multiplier is higher than that of the tripler module at the distances of 45cm and 50cm due to the voltage multiplier with 10 diodes.

• Proceedings of the KIPE Conference
• /
• 2018.11a
• /
• pp.201-202
• /
• 2018

본 논문에서는 넓은 범위의 입력전압에서의 빠른 응답속도를 가진 고승압 양방향 컨버터를 제안한다. 제안하는 시스템은 2대의 Buck컨버터와 SRC(Seris Resonant Covnerter)로 구성된 3-stage 구조이며, 고승압이 가능하고 넓은 입력전압 범위에서 고효율을 성취할 수 있다. 또한 제안하는 컨버터는 모든 전압범위에서 빠른 응답속도로 제어를 하며 CC(Constant Current), CV(Constant Voltage), CP(Constant Power) 및 Pulse 동작을 수행한다. 제안하는 양방향 컨버터의 1.8kW급 시작품으로 실험을 통하여 타당성을 검증하였고, 최고효율 96%, 정격효율 90.8%를 달성하였다.