• Steel and Composite Structures
• /
• 제23권1호
• /
• pp.17-29
• /
• 2017

The seismic performance of steel beam to concrete-encased composite column with unsymmetrical steel section joints is investigated and reported within this paper. Experimental and analytical evaluation were conducted on a total of 8 specimens with T-shaped and L-shaped steel section under lateral cyclic loading and axial compression. The test parameters included concrete strength, stirrup ratio and axial compression ratio. The response of the specimens was presented in terms of their hysterisis loop behavior, stress distribution, joint shear strength, and performance degradation. The experiment indicated good structural behavior and good seismic performance. In addition, a three-dimensional nonlinear finite-element analysis simulating was conducted to simulate their seismic behaviors. The finite-element analysis incorporated both bond-slip relationship and crack interface interaction between steel and concrete. The results were also compared with the test data, and the analytical prediction of joint shear strength was satisfactory for both joints with T-shaped and L-shaped steel section columns. The steel beam to concrete-encased composite column with unsymmetrical steel section joints can develop stable hysteretic response and large energy absorption capacity by providing enough stirrups and decreased spacing of transverse ties in column.

• Bulletin of the Korean Chemical Society
• /
• 제28권7호
• /
• pp.1159-1166
• /
• 2007

New unsymmetrical trans-stilbenes have been prepared by the sequential coupling reactions of bromobenzenesulfonate with formylarylboronic acids, benzylphosphonates and arylmagnesium bromides and characterized. The nickel-catalyzed reactions of stilbenesulfonates with aryl Grignard reagents produced the corresponding stilbenes via the nucleophilic aromatic substitution of the neopentyloxysulfonyl group by aryl nucleophiles. The great chemoselectivity of the alkyloxysulfonyl group allows the stepwise construction of unsymmetrical trans-stilbenes possessing terphenyl moieties. This procedure appears to be a promising and conceptually straightforward route for the parallel synthesis of various unsymmetrical stilbenes as well as other highly conjugated hydrocarbons.

• 제어로봇시스템학회논문지
• /
• 제7권10호
• /
• pp.806-811
• /
• 2001

The analysis and control algorithm of a new type unsymmetrical self-bearing step motor is presented. The motor actuator is used for both motor and bearing functionality without any redundant coil windings or redudant electromagnets for bearing functionality. Self bearing step motor layout and control current generation method for unsymmetrical position of electromagnets are described. This new current generation method without additional current for bearing functionality leads to minimize the power loss. As the result of the unbalance response approach, the constant torque is possible, even though the bearing functionality is added or not.

• Journal of Electrical Engineering and Technology
• /
• 제6권5호
• /
• pp.658-665
• /
• 2011

In the present paper, a novel fast peak detector for single- or three-phase unsymmetrical voltage sags is proposed. The proposed detector is modified from a single-phase digital phase-locked loop based on a d-q transformation using an all-pass filter (APF). APF generates a virtual phase with $90^{\circ}$ phase delay. However, this virtual phase cannot reflect a sudden change of the grid voltage in the moment of voltage sag, which causes a peak value to be significantly distorted and to settle down slowly. Specifically, the settling time of the peak value is too long when voltage sag occurs around a zero crossing, such as phase $0^{\circ}$ and $180^{\circ}$. This paper describes the operating principle of the APF problem and proposes a modified all-pass filter (MAPF) to mitigate the inherent APF problem. In addition, a new fast peak detector using MAPF is proposed. The proposed detector is able to calculate a peak value within 0.5 ms, even when voltage sag occurs around zero crossing. The proposed fast peak detector is compared with the conventional detector using APF. Results show that the proposed detector has faster detection time in the whole phase range. Furthermore, the proposed fast peak detector can be effectively applied to unsymmetrical three-phase voltage sags. Simulation and experimental results verify the advantages of the proposed detector and MAPF.

• 대한전자공학회논문지
• /
• 제24권4호
• /
• pp.590-596
• /
• 1987

In this paper, it was studied on the design of a sun sensor which is able to sense the declinations of an azimuth angle and a zenith angle for a digital sun seeker control system so that it will seek the sun accurately. And, it was considered the construction of digital controllable algorithms through experiments. Peculiar design method of the sun sensor is that sensor box was constructed with three square silicon solar cells and that the three cells were mounted unsymmetrical forming the

• Journal of Power Electronics
• /
• 제16권4호
• /
• pp.1513-1525
• /
• 2016

Rapid and accurate phase synchronization is critical for the reliable control of grid-tied inverters. However, the commonly used software phase-locked loop methods do not always satisfy the need for high-speed and accurate phase synchronization under severe grid imbalance conditions. To address this problem, this study develops a novel open-loop phase locking scheme based on a synchronous reference frame. The proposed scheme is characterized by remarkable response speed, high accuracy, and easy implementation. It comprises three functional cascaded blocks: fast orthogonal signal generation block, fast fundamental-frequency positive sequence component construction block, and fast phase calculation block. The developed virtual orthogonal signal generation method in the first block, which is characterized by noise immunity and high accuracy, can effectively avoid approximation errors and noise amplification in a wide range of sampling frequencies. In the second block, which is the foundation for achieving fast phase synchronization within 3 ms, the fundamental-frequency positive sequence components of unsymmetrical grid voltages can be achieved with the developed orthogonal signal construction strategy and the symmetrical component method. The real-time grid phase can be consequently obtained in the third block, which is free from self-tuning closed-loop control and thus improves the dynamic performance of the proposed scheme. The proposed scheme is adaptive to severe unsymmetrical grid voltages with sudden changes in magnitude, phase, and/or frequency. Moreover, this scheme is able to eliminate phase errors induced by harmonics and random noise. The validity and utility of the proposed scheme are verified by the experimental results.

• 한국지반환경공학회 논문집
• /
• 제9권7호
• /
• pp.25-35
• /
• 2008

국내의 경우 일반적인 2차로 도로터널은 시공경험 및 축적된 제반자료가 풍부하여 표준적인 지보패턴이 제시되고 있으나, 2-Arch 도로터널의 경우 아직 시공경험 및 계측자료가 부족하여 특정지형 및 암질에 대해 별도의 발파설계와 해석을 통해 선정한 지보패턴을 표준적으로 적용하고 있다. 따라서 본 연구에서는 2-Arch 도로터널의 설계 및 시공시 적용되고 있는 표준지보패턴에 대하여 하중분담률 및 편토압에 따른 거동을 분석하고 발파진동이 중앙벽체에 미치는 영향을 분석하여 적용된 지보재의 적정성 여부를 검토하였다. 그 결과 표준지보패턴에 적용되는 지보량은 적정한 것으로 나타났으나, 이는 특정지형 및 암질 조건을 고려하여 해석 후 선정된 것으로, 향후 2-Arch 도로터널의 설계 및 시공시 최종적인 표준지보패턴 선정은 대상 터널의 지형조건, 토질조건, 시공조건 등을 종합적으로 고려하여 결정되어야 할 것으로 사료된다.

• 지질공학
• /
• 제30권2호
• /
• pp.131-145
• /
• 2020

연약지반 상에 도로성토를 시공할 경우 연약지반에는 편재하중이 작용하게 되어 연약지반의 측방유동이나 활동파괴가 종종 발생하게 된다. 본 연구에서는 연약지반에 설치되는 교대말둑기초의 안정성과 말뚝의 거동특성을 파악하는 것이다. 지반의 측방유동으로 인하여 말뚝에 작용하는 수평하중에 대한 기존 연구자들의 연구내용을 파악하고 유한요소해석을 수행하여 교대말뚝기초의 거동특성과 보강효과를 확인하여 측방유동을 받는 교대말뚝기초의 거동을 연구하였다. 압밀도 분석 결과, 압밀 단계에 따라 연약지반 강도증가율에 의해 연약지반의 강도정수인 점착력은 약 1.1~1.8배 증가하였다. 측방유동 검토 결과, 허용수평변위 기준은 3.8 cm를 사용하는 것이 경제적으로나 시공적인 면에서 타당한 것으로 판단되나, 구조물의 중요도 및 지반의 불확실성 등을 고려하여 시공 시 계측을 실시하고 그에 따른 측방유동에 대한 철저한 안전관리가 이루어져야 할 것으로 판단된다.

• 한국지반공학회지:지반
• /
• 제10권2호
• /
• pp.25-40
• /
• 1994

연약지반상에 편재하중이 작용할 경우에 지반의 소성화에 의한 측방유동과 그에 따른 안정관리에 대한 거동을 규명하기 위하여 기존의 이론적인 배경을 조사하고,모형실험에 의한 실측결과와 서로 비교 분석하여 보았다. 모형실험은 모형재하장치를 제작하고 토조안에 연약지반의 재성형시료를 채워 일정한 시간간 격으로 하중단계를 증가시켜 가면서 변형의 거동상태를 관측하였다. 실험결과 한계하중 및 극한하중은 각각 Jaky와 Meyerhof의 제안값에 접근하는 경향을 가졌 으며,측방유동압은 최대값을 z/H=0.26+1.71cu에서 산정한 깊이에 작용시키고 지표면에 최대 값의 113을 작용시킨 사변형분포에 근접하였으며, 최대값으로는 홍의 제안식이나 Tschebotarioff의 제안식의 유동압계수 ($\alpha=0.4$)를 ($\alpha=K_0$)로 대체한 간편식에서 산정할 수 있다. 또한 [(q/$y_m$)-q] 및 [$S_y-(y_m/S_y)$] 의 관계에서 구한 파괴하중은 극한하중보다 작게 나타 났으며, 특히 [$S_y(y_m/S_y)$] 관리도의 파괴기준선은 다음식에서 산정할 수 있다. $S_y.=3.15exp[-0.58(y_m/S_y)$