• 제목/요약/키워드: unsafe behavior and condition

검색결과 10건 처리시간 0.029초

안전관리 평가를 통한 연구실 안전수준 개선방안에 관한 연구 -호남지역 대학 중심으로- (A study on improvement of the safety level in university laboratory using the safety management assessment)

  • 박해천;조상훈;심철우
    • 대한안전경영과학회지
    • /
    • 제14권3호
    • /
    • pp.11-19
    • /
    • 2012
  • Especially because of the distinctiveness that new experiments and research provoke coexistence of various risk factors, the researchers in university laboratory are being exposed to incidents that are difficult to predict. Due to the fact that the numbers of accidents that occur at the university laboratory are increasing, the necessity for laboratory safety management is on the rise. Most laboratory accidents are caused by the ability that can detect risk factors such as unsafe behavior or unsafe condition but is not working perfectly. In order to prevent researchers in advance from unsafe behavior or unsafe condition, effective safety education, systematic safety management, safe research environment, continuous safety check and proper measures after accident are the most important factors. In this study, survey was conducted in university laboratory to identify the factors that affect on safety management and to measure the safety management level. As a result, effective measures are proposed for the improvement of the safety management level.

협력업체의 안전관리 형태에 따른 반도체 산업의 사고의 영향요인에 관한 연구 (A Study on the Cause of the Accidents Influencing Factor based on the Safety Management Shape Types of the Cooperation Companies in Semiconductor Industry)

  • 윤용구;박범
    • 산업경영시스템학회지
    • /
    • 제32권4호
    • /
    • pp.1-8
    • /
    • 2009
  • The studies on semiconductor industrial accident in korea have been focused on the frequencies of each type of safety management employee, characteristics, cause and unsafe conditions, acts and so on. Those attributes of semiconductor industrial accidents were usually analyzed independently, so that it was hard to provides a wel-developed process and systematic guidelines for efficient safety management. Therefore, there were a few studies based on comprehensive survey in terms of the shape type of safe management. The questionnaire survey carried out for the 284 workers who were responsible for safety management in center with cooperation companies in semiconductor industry factor analysis showed that there were three factors of safety management. First, investment and operation and management for accident prevention, Second, unsafe act and condition, safety management Third, general human error and behavior. The industries of respondents were correlative with three groups. Three groups showed statistically significant differences on the number of cases. Actually, the group with the larger investment and the more unsafe cause, human error of accidents prevention had a smaller causes of accident cases.

반도체 산업의 안전관리 형태별에 따른 원인에 관한 연구 (협력업체 중심(中心)으로) (Research for the Mainly Cause of Safety-Management Sharp-type of Semiconductor Industry (To Center with Corporate Company))

  • 윤용구
    • 대한안전경영과학회:학술대회논문집
    • /
    • 대한안전경영과학회 2008년도 춘계학술대회
    • /
    • pp.19-33
    • /
    • 2008
  • The study on semiconductor industrial accident in korea has been focused on frequencies of each type, employee, characteristics, cause and un-safety condition, behaviour and so on. Those attributes of semiconductor industrial accidents were usually analyzed independently, so that it was hard to provides a well-process and systematic guide lines for efficient safety management. There fore, there were a few studies based on comprehensive survey in terms of sharp-type of safe management. The questionnaire survey carried out for the workers(284) who were responsible for safety management in to center with corporate company with semiconductor industry the factor analysis showed that there were three factor of safety management. They were 1) Investment and operation and management for accident prevention, 2) Unsafe, safety management 3) General human error and behavior the industries of respondents were correlative with three group. Three Groups showed a statistically significant differences on the number of cases. Actually, the group with the larger investment and the better unsafe cause, human error a of accident prevention had a smaller cause of accident cases.

  • PDF

헬리콥터 유입류 모델에 따른 발사된 로켓의 비행궤적 영향성 및 안전발사 기동영역 해석 연구 (A Study on the Influence of Helicopter Main Rotor Inflow Model upon Launched Rocket Trajectory and Safe Launch Envelope)

  • 양창덕;정동우
    • 항공우주시스템공학회지
    • /
    • 제13권3호
    • /
    • pp.70-77
    • /
    • 2019
  • 본 논문에서는 헬리콥터의 유입류 모델에 따라 헬리콥터에서 발사되는 로켓의 궤적에 대한 영향성을 비행역학 해석을 통해 검토하였다. 무장형상의 비선형 비행역학 해석모델은 UH-60 헬리콥터 형상으로 구성하고 헬리콥터에서 발사되는 발사체의 궤적예측에는 HYDRA 70 로켓을 이용하였다. 다양한 로터 유입류 모델을 사용하여 각각의 모델에 따라 로켓 발사궤적에 미치는 영향을 검토하였다. 또한 헬리콥터의 다양한 비행조건에 대해 로켓 발사 시뮬레이션 해석을 수행하고 로켓이 로터 디스크 면과 근접하는 위험한 로켓발사 비행영역을 검토하였다.

전문건설업 안전문화 평가에 관한 연구 (A Study on the Evaluation of Safety Culture in Specialty Contractor)

  • 신상연;백신원;정성룡
    • 한국안전학회지
    • /
    • 제36권2호
    • /
    • pp.18-25
    • /
    • 2021
  • Specialty contractor facilities, which involve a combination of welding and commissioning, face a high risk of serious accidents such as fire, explosion, and suffocation associated with welding work, nitrogen, and argon use. In such facilities, the organizational safety culture has considerable impact on the frequency of accidents. In this study, a safety culture evaluation was conducted on specialty contractors. NOSACQ-50, a standardized survey method on safety culture, was selected as an assessment tool to evaluate the safety culture in specialized construction companies that could not afford to invest heavily in safety. The self-administered questionnaire survey was conducted with 201 workers of four construction companies and the results were analyzed. It was found that in companies with low safety culture, the occurrence of irrationality was 66.0%, while in companies with high safety culture, the occurrence of irrationality was 42.6%. Thus, the difference in the occurrence of irrationality by safety culture was statistically significant. The difference in safety culture level according to the experience of occurrence of irrationality was also significant. It was also found that the higher the belief in safety management authorization, safety responsibilities of managers, worker safety priorities, and safety system effects, the lower the probability of irrationality.

주조 알루미늄합금 A356의 저주기 피로특성 및 피로수명 모델 (Low Cycle Fatigue Characteristics of A356 Cast Aluminum Alloy and Fatigue Life Models)

  • 고승기
    • 한국자동차공학회논문집
    • /
    • 제1권1호
    • /
    • pp.131-139
    • /
    • 1993
  • Low cycle fatigue characteristics of cast aluminum alloy A356 with a yield strength and ultimate strength of 229 and 283 MPa respectively was evaluated using smooth axial specimen under strain controlled condition. Reversals to failure ranged from 16 to 107. The cast aluminum alloy exhibited cyclically strain-gardening behavior. The results of low cycle fatigue tests indicated that the conventional low cycle fatigue tests indicated that the conventional low cycle fatigue life model was not a satisfactory representation of the data. This occurred because the elastic strain-life curve was not-log-log linear and this phenomena caused a nonconservative and unsafe fatigue life prediction at both extremes of long and short lives. A linear log-log total strain-life model and a bilinear log-log elastic strain-life model were proposed in order to improve the representation of data compared to the conventional low cycle fatigue life model. Both proposed fatigue life models were statistically analyzed using F tests and successfully satisfied. However, the low cycle fatigue life model generated by the bilinear log-log elastic strain-life equation yielded a discontinuous curve with nonconservatism in the region of discontinuity. Among the models examined, the linear log-log total strain-life model provided the best representation of the low cycle fatigue data. Low cycle fatigue life prediction method based on the local strain approach could conveniently incorporated both proposed fatigue life models.

  • PDF

건설현장 달비계 추락재해 예방을 위한 사례분석 연구 (Analysing Disaster Cases on Construction Sites to Prevent Falling Disaster of Hanging Scaffolding)

  • 임형철;이동헌;정성춘
    • 한국건설관리학회논문집
    • /
    • 제20권6호
    • /
    • pp.66-73
    • /
    • 2019
  • 정부와 안전보건공단의 재해 절감을 위한 다양한 노력덕분에 산업과 건설업 전반에 걸쳐 재해 사고는 감소추세를 보이고 있다. 하지만 건설업에서의 추락재해는 감소하지 않고 오히려 증가하고 있다. 특히, 달비계에 의한 추락재해는 매년 발생빈도는 낮지만 발생 시 작업자의 사망과 직결한다는 측면에서 재해강도가 매우 크다고 할 수 있다. 국내 건설업에서의 달비계 작업환경은 매우 열악하다. 특히 소규모 건설현장에서의 달비계 작업자들은 안전에 대한 감독과 관리를 받을 수 있는 주체가 없다. 달비계 작업자들은 자신들이 직접 제작한 성능이 확인되지 않은 달비계를 가지고 불안전한 작업환경에 내몰리고 있다. 따라서 본 연구는 15년간 달비계에서 기인한 242건의 사고사례들을 분석하여 추락재해 발생 주요 원인 및 개선방안을 제시하였으며, 주요내용은 불안전한 행동에 의한 재해발생률이 높아서 작업대 안착 시, 안전난간을 넘어가는 과정, 몸의 불균형 등에서 사고가 많으며 설비개선 및 작업방법개선으로 해결이 요구된다. 또한, KOSHA Guide에서 제시하는 작업순서 상의 문제점으로 발생되는 재해는 없었으며, 다만 작업 순서를 따르지 않아 안전대를 안전대 걸이용 로프에 미설치 및 미부착에 의한 사망으로 이르는 재해가 다수 발생된 것으로 파악되어 작업방법의 개선에서 가장 중요한 사항은 수직구명줄 및 안전대의 설치 및 착용이 가장 중요한 사항으로 도출되었다.

한국 성인 변형근로자의 소화성궤양 환자 관련요인 (Adult Patients with Peptic Ulcer in Korea-related Factors, Flexible Workers)

  • 박선희;오향숙;김창환
    • 보건의료산업학회지
    • /
    • 제6권2호
    • /
    • pp.211-217
    • /
    • 2012
  • To identify health behavior of Peptic ulcer patients among all employees in Korea and examine relevant factors to present basic data for improving Korean adult employees' health conditions and quality of living, 3,515 employees aged 20 to 69 were sampled from the group that responded to the question concerning the presence of Peptic ulcer in the fourth Korea National Health and Nutrition Examination Survey for the third year (2009). After logistic regression analysis was carried out to see the effects of working conditions, harmful factors, shift work, stress perception, and experience of depression on the presence of Peptic ulcer, it was found that unsafe or unpleasant working conditions led to higher risk of getting Peptic ulcer, that flexible workers were more likely to get Peptic ulcer, and that depression or stress perception exerted almost no effect on Peptic ulcer. With the increase in the number of flexible workers, increasingly more interest is taken in the effects of shift work on health; occupational Peptic ulcer tends to become chronic as compared with the condition in the general population and reappear even after recovery in many cases; therefore, it is necessary to take special management measures by estimating the number of those at a risk of getting Peptic ulcer and by finding out its risk factors.

충격력을 받는 구형 쉘의 혼돈거동 해석 (Chaotic Response of a Spherical Shell to Impulsive Loading)

  • 이재영;강영철
    • 전산구조공학
    • /
    • 제10권3호
    • /
    • pp.167-174
    • /
    • 1997
  • 계가 혼돈거동을 나타낼 경우에는 변수들의 미소변화에 의해서도 계가 전혀 다른 거동을 나타낼 수 있기 때문에 비선형계의 설계 및 해석시에는 이를 고려해야 한다. 따라서 본 연구에서는 구형 쉘의 중앙에 충격하중이 수직방향으로 작용하는 경우, 쉘의 기하학적 비선형성과 재료적 비선형성으로부터 기인되는 혼돈거동을 해석하였다. 쉘의 탄소성거동을 유한요소법을 이용하여 구한 후 계의 거동을 변위-시간이력, 프앙카레 맵, phase diagram등의 표준적인 방법들을 이용하여 쉘의 혼돈거동을 규명하였다. 해석결과, 계는 혼돈거동을 나타내었으나 탄소성보의 경우와는 달리 초기조건의 미소변화에 대한 극도의 민감도는 나타나지 않았으며 시간에 대한 쉘의 거동특성도 크게 변하지 않았다. 프앙카레 맵은 한정된 영역에 결쳐서 점들이 분포되었기 때문에 계의 거동이 혼돈거동임을 보여 주고 있지만 혼돈계의 프앙카레 맵에서 나타나는 기하학적 구조는 나타나지 않았다. 에너지선도를 이용하여 쉘이 하중의 작용방향 또는 반대방향으로 불규칙적으로 snap-through되는 원인을 규명하였다.

  • PDF

근로자의 산업보건 지식과 태도에 관한 조사연구 (A Survey on the Knowledge and Attitude of Workers Concerning Occupational Health)

  • 박영식;조수열;남철현
    • 한국환경보건학회지
    • /
    • 제18권2호
    • /
    • pp.3-18
    • /
    • 1992
  • This research was carried out on 1,017 production workers for four months from May to August, 1991, to search more effective management method of their health by grasping their knowledge and attitude on industrial health. The results of this study can be summarized as follows: 1. As for general characteristics, 74.2% were male and 25.8% were female among the 1,017 workers. The two largest age groups were 30~39, 38.7%. As for education level, graduation from high school was 58.6%, 61.2% were married, 35.9% owned their house, and workers who worked more than 1 year less than 5 years was 52.9%, workers who worked 8 hours a day was 46.7%, the largest group income level was 60~69 thousand won 21.2%, and the degree of satisfaction with work was ordinary, 45.6%. 2. The degree of recognition concerning occupational diseases was 92.5% at a very high rate. Causes of occupational diseases under the present work field were in order of noise, dust, heavy metal. The largest group of the counterplan for prevention was an improvement of working environment, 62.0%. 3. The major cause that threatens worker's health was poor working environment, 31.4%. As the best method for workers' health management, working environment management was pointed. 4. As for health examination result, the response that it is of use to health management was 53.8%. As for examination method and result, 42.7% responded that they are formal. The practice period was more than once every six months as the largest group, and the highest desire for improvement was that they wants an exact information of the result. 5. 49.3% of the respondents know about the measurement of working environment an the response that the measurement is necessary to improve working environment was 57.9%, and that the results from the measurement were reflected on improvement an management 57.5%. Appropriate period to take a measurement was more than once per six months, 40.2% and per three months, 29.1%. 6. As for safety and halth instruction, 34.5% were educated for both, 38.2% for only safety education and just 4.6% for only health education. 51.9% responded that they had never been educated out of work place. The period of its practice was more than once a month, 39.5% and every three months, 21.3%. 7. The importance of safety and health showed that the one is equal to the other, 59.8%, that the one is more important, 29.6%, and that other is more important, 7.6%. 67.7% said the necessity of a safety and health manager. 8. In spite of more or less health obstacle of work environment, 14.9% of the respondents wanted to overwork to gain an allowance for over-time work, 39.9% didn't, and 40.2% according to condition and state. 9. As the most important cause of industrial accident, 40.2% indicated unsafe behavior. As for the individual protective instrument, 66.1% of all the respondents said they have worn it to protect industrial diseases. 10. As for the degree of understanding of the contents in Industrial Safety and Health Law and Industrial Law of Accident Insurance, an affirmative response was respectively 49.3% and 50.8% and the sources of safety-health information were televisions and radios, 28.0%. Therefore, it is necessary that we do positive working environmental improvement, continuous management and health education's inforcement to increase their health and prevent occupational diseases.

  • PDF