• Journal of the Korea Safety Management & Science
• /
• v.14 no.3
• /
• pp.11-19
• /
• 2012

Especially because of the distinctiveness that new experiments and research provoke coexistence of various risk factors, the researchers in university laboratory are being exposed to incidents that are difficult to predict. Due to the fact that the numbers of accidents that occur at the university laboratory are increasing, the necessity for laboratory safety management is on the rise. Most laboratory accidents are caused by the ability that can detect risk factors such as unsafe behavior or unsafe condition but is not working perfectly. In order to prevent researchers in advance from unsafe behavior or unsafe condition, effective safety education, systematic safety management, safe research environment, continuous safety check and proper measures after accident are the most important factors. In this study, survey was conducted in university laboratory to identify the factors that affect on safety management and to measure the safety management level. As a result, effective measures are proposed for the improvement of the safety management level.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.32 no.4
• /
• pp.1-8
• /
• 2009

The studies on semiconductor industrial accident in korea have been focused on the frequencies of each type of safety management employee, characteristics, cause and unsafe conditions, acts and so on. Those attributes of semiconductor industrial accidents were usually analyzed independently, so that it was hard to provides a wel-developed process and systematic guidelines for efficient safety management. Therefore, there were a few studies based on comprehensive survey in terms of the shape type of safe management. The questionnaire survey carried out for the 284 workers who were responsible for safety management in center with cooperation companies in semiconductor industry factor analysis showed that there were three factors of safety management. First, investment and operation and management for accident prevention, Second, unsafe act and condition, safety management Third, general human error and behavior. The industries of respondents were correlative with three groups. Three groups showed statistically significant differences on the number of cases. Actually, the group with the larger investment and the more unsafe cause, human error of accidents prevention had a smaller causes of accident cases.

• Proceedings of the Safety Management and Science Conference
• /
• 2008.04a
• /
• pp.19-33
• /
• 2008

The study on semiconductor industrial accident in korea has been focused on frequencies of each type, employee, characteristics, cause and un-safety condition, behaviour and so on. Those attributes of semiconductor industrial accidents were usually analyzed independently, so that it was hard to provides a well-process and systematic guide lines for efficient safety management. There fore, there were a few studies based on comprehensive survey in terms of sharp-type of safe management. The questionnaire survey carried out for the workers(284) who were responsible for safety management in to center with corporate company with semiconductor industry the factor analysis showed that there were three factor of safety management. They were 1) Investment and operation and management for accident prevention, 2) Unsafe, safety management 3) General human error and behavior the industries of respondents were correlative with three group. Three Groups showed a statistically significant differences on the number of cases. Actually, the group with the larger investment and the better unsafe cause, human error a of accident prevention had a smaller cause of accident cases.

• Journal of Aerospace System Engineering
• /
• v.13 no.3
• /
• pp.70-77
• /
• 2019

This study presents the numerical investigation of the trajectory of rocket launched from a helicopter. The nonlinear mathematical model of armed configuration of UH-60 helicopter was developed while Hydra 70 unguided rocket was modeled to simulate the rocket behavior. The effects of various inflow models on the launched rocket trajectory are obtained. Similarly, rocket launch simulation was performed to determine the unsafe flight maneuver condition where the rocket trajectory is critically close to the helicopter main rotor tip path plane.

• Journal of the Korean Society of Safety
• /
• v.36 no.2
• /
• pp.18-25
• /
• 2021

Specialty contractor facilities, which involve a combination of welding and commissioning, face a high risk of serious accidents such as fire, explosion, and suffocation associated with welding work, nitrogen, and argon use. In such facilities, the organizational safety culture has considerable impact on the frequency of accidents. In this study, a safety culture evaluation was conducted on specialty contractors. NOSACQ-50, a standardized survey method on safety culture, was selected as an assessment tool to evaluate the safety culture in specialized construction companies that could not afford to invest heavily in safety. The self-administered questionnaire survey was conducted with 201 workers of four construction companies and the results were analyzed. It was found that in companies with low safety culture, the occurrence of irrationality was 66.0%, while in companies with high safety culture, the occurrence of irrationality was 42.6%. Thus, the difference in the occurrence of irrationality by safety culture was statistically significant. The difference in safety culture level according to the experience of occurrence of irrationality was also significant. It was also found that the higher the belief in safety management authorization, safety responsibilities of managers, worker safety priorities, and safety system effects, the lower the probability of irrationality.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.1 no.1
• /
• pp.131-139
• /
• 1993

Low cycle fatigue characteristics of cast aluminum alloy A356 with a yield strength and ultimate strength of 229 and 283 MPa respectively was evaluated using smooth axial specimen under strain controlled condition. Reversals to failure ranged from 16 to 107. The cast aluminum alloy exhibited cyclically strain-gardening behavior. The results of low cycle fatigue tests indicated that the conventional low cycle fatigue tests indicated that the conventional low cycle fatigue life model was not a satisfactory representation of the data. This occurred because the elastic strain-life curve was not-log-log linear and this phenomena caused a nonconservative and unsafe fatigue life prediction at both extremes of long and short lives. A linear log-log total strain-life model and a bilinear log-log elastic strain-life model were proposed in order to improve the representation of data compared to the conventional low cycle fatigue life model. Both proposed fatigue life models were statistically analyzed using F tests and successfully satisfied. However, the low cycle fatigue life model generated by the bilinear log-log elastic strain-life equation yielded a discontinuous curve with nonconservatism in the region of discontinuity. Among the models examined, the linear log-log total strain-life model provided the best representation of the low cycle fatigue data. Low cycle fatigue life prediction method based on the local strain approach could conveniently incorporated both proposed fatigue life models.

• Korean Journal of Construction Engineering and Management
• /
• v.20 no.6
• /
• pp.66-73
• /
• 2019

Thanks to various efforts to reduce disasters by the government and the Health and Safety Authority, disasters across industries and the construction industry show their reduction trend. However, the falling disasters in the construction industry have not decreased and increased on the contrary. Especially falling disaster caused by Hanging Scaffolding is the most critical disaster which shows low occurrence frequency but is directly connected to death of worker. The working environment for Hanging Scaffolding is poor in domestic construction site. In particular, the Hanging Scaffolding workers in small construction sites are not on the safety control and management by anyone for their works. They are driven to unsafe working condition with mostly uncertified facilities which are made by themselves. Therefore, this study is focused on searching falling disaster factors from the 242 disaster cases caused by Hanging Scaffolding Work in 15 years presented by KOSHA, and trying to provide suggestions for improvement. The improvement of the method of work requires facility improvement and work due to high accident rate caused by unsafe behavior. Analysis of the case of a disaster occurring over the past 15 years shows that no disaster occurred due to problems in the order of operations presented by KOSHA. However, it was found that many accidents resulted from death caused by safety belts not being installed or attached to ropes using safety belts without following the order of work. The most important aspect of improving the work method was the installation and wearing of lifeboats and safety belts.

• The Korean Journal of Health Service Management
• /
• v.6 no.2
• /
• pp.211-217
• /
• 2012

To identify health behavior of Peptic ulcer patients among all employees in Korea and examine relevant factors to present basic data for improving Korean adult employees' health conditions and quality of living, 3,515 employees aged 20 to 69 were sampled from the group that responded to the question concerning the presence of Peptic ulcer in the fourth Korea National Health and Nutrition Examination Survey for the third year (2009). After logistic regression analysis was carried out to see the effects of working conditions, harmful factors, shift work, stress perception, and experience of depression on the presence of Peptic ulcer, it was found that unsafe or unpleasant working conditions led to higher risk of getting Peptic ulcer, that flexible workers were more likely to get Peptic ulcer, and that depression or stress perception exerted almost no effect on Peptic ulcer. With the increase in the number of flexible workers, increasingly more interest is taken in the effects of shift work on health; occupational Peptic ulcer tends to become chronic as compared with the condition in the general population and reappear even after recovery in many cases; therefore, it is necessary to take special management measures by estimating the number of those at a risk of getting Peptic ulcer and by finding out its risk factors.

• Computational Structural Engineering
• /
• v.10 no.3
• /
• pp.167-174
• /
• 1997

Engineers must be aware of possible sources of chaotic behavior. They may render conventional design predictions untrustworthy and potentially unsafe because of the sensitivity to initial conditions. Dynamic responses of a spherical shell subjected to impulsive loading which act on the center are analyzed using the finite element method. The chaotic responses are identified by the standard methods, such as displacement-time histories, Poincare maps, and phase diagrams. The responses are chaotic, but, not so sensitive to the initial conditions, and the characteristics of responses are not changed with time, in contrast to the case of the responses of beam. The Poincare points scattered in the limited area represent that the responses are chaotic, but do not show the geometric structures. The snap-through phenomena of the shell to the side of the direction of the load or of the opposite direction, is analysed by using the energy diagram.

• Journal of Environmental Health Sciences
• /
• v.18 no.2
• /
• pp.3-18
• /
• 1992

This research was carried out on 1,017 production workers for four months from May to August, 1991, to search more effective management method of their health by grasping their knowledge and attitude on industrial health. The results of this study can be summarized as follows: 1. As for general characteristics, 74.2% were male and 25.8% were female among the 1,017 workers. The two largest age groups were 30~39, 38.7%. As for education level, graduation from high school was 58.6%, 61.2% were married, 35.9% owned their house, and workers who worked more than 1 year less than 5 years was 52.9%, workers who worked 8 hours a day was 46.7%, the largest group income level was 60~69 thousand won 21.2%, and the degree of satisfaction with work was ordinary, 45.6%. 2. The degree of recognition concerning occupational diseases was 92.5% at a very high rate. Causes of occupational diseases under the present work field were in order of noise, dust, heavy metal. The largest group of the counterplan for prevention was an improvement of working environment, 62.0%. 3. The major cause that threatens worker's health was poor working environment, 31.4%. As the best method for workers' health management, working environment management was pointed. 4. As for health examination result, the response that it is of use to health management was 53.8%. As for examination method and result, 42.7% responded that they are formal. The practice period was more than once every six months as the largest group, and the highest desire for improvement was that they wants an exact information of the result. 5. 49.3% of the respondents know about the measurement of working environment an the response that the measurement is necessary to improve working environment was 57.9%, and that the results from the measurement were reflected on improvement an management 57.5%. Appropriate period to take a measurement was more than once per six months, 40.2% and per three months, 29.1%. 6. As for safety and halth instruction, 34.5% were educated for both, 38.2% for only safety education and just 4.6% for only health education. 51.9% responded that they had never been educated out of work place. The period of its practice was more than once a month, 39.5% and every three months, 21.3%. 7. The importance of safety and health showed that the one is equal to the other, 59.8%, that the one is more important, 29.6%, and that other is more important, 7.6%. 67.7% said the necessity of a safety and health manager. 8. In spite of more or less health obstacle of work environment, 14.9% of the respondents wanted to overwork to gain an allowance for over-time work, 39.9% didn't, and 40.2% according to condition and state. 9. As the most important cause of industrial accident, 40.2% indicated unsafe behavior. As for the individual protective instrument, 66.1% of all the respondents said they have worn it to protect industrial diseases. 10. As for the degree of understanding of the contents in Industrial Safety and Health Law and Industrial Law of Accident Insurance, an affirmative response was respectively 49.3% and 50.8% and the sources of safety-health information were televisions and radios, 28.0%. Therefore, it is necessary that we do positive working environmental improvement, continuous management and health education's inforcement to increase their health and prevent occupational diseases.