• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2001년도 ICCAS
• /
• pp.88.5-88
• /
• 2001

We propose a neural network solver for an inverse problem. The problem is that input data with complete teaching include defects and predict the defect value. The solver is constructed of a three layer neural network whose learning method is combined from BP and reconstruction learning. The input data for the defects are unknown; therefore, the circulation of an arithmetic progression replaces them; rightly, the learning procedure is not converged for the circulation data vut for the normal data. The learning is quitted after such a learning status id kept. Then, we search a minimum of the differences between teaching data and output of the circulation. Then, we search a minimum of the ...

• Journal of the Korean Institute of Telematics and Electronics
• /
• 제23권5호
• /
• pp.625-630
• /
• 1986

In this paper, an adaptive observer based upon the exponentially weighted least-square method is implemented in the design of a model reference adaptive controller for an unknown time-invariant discrete single-input single-output linear plant. The adaptive observer estimates the padrameter vectors and initial state vector. The control input is determined so that the output of the plant converges to the output of the stable model reference.

• Journal of Korean Society for Atmospheric Environment
• /
• 제22권1호
• /
• pp.135-143
• /
• 2006

The objective of this study is to develop PSCF (potential source contribution function) program and determine the optimal values of control parameters to enhance the prediction of PSCF modeling. This study provides an important information and methodologies that can be used to get better results of locating influencing sources, especially unknown and fugitive sources. To determine proper values of control parameters in PSCF model, the diagnostic assessment on the results obtained by the various input conditions was carried out. PSCF model has created and improved from version 1.0 to version 7.0 since 200 I and the measured data (at least > 100) of receptor, and the values of control input parameters should be arranged and determined to obtain reliable results in PSCF modeling. The size of modeling domain must be determined to include enough trajectories to get reliable results. And the size of grid is recommended to be 2.5 $\sim$ 5 degrees for global scale, 0.2 $\sim$ 1 degrees for regional scale and 0.05 degree for local scale.

• The Journal of the Korea Contents Association
• /
• 제9권4호
• /
• pp.131-141
• /
• 2009

An increasing variety of malware, such as worms, spyware and adware, threatens both personal and business computing. Remotely controlled bot networks of compromised systems are growing quickly. This paper proposes an intrusion detection system based outflow traffic analysis. Many research efforts and commercial products have focused on preventing intrusion by filtering known exploits or unknown ones exploiting known vulnerabilities. Complementary to these solutions, the proposed IDS can detect intrusion of unknown new mal ware before their signatures are widely distributed. The proposed IDS is consists of a outflow detector, user monitor, process monitor and network monitor. To infer user intent, the proposed IDS correlates outbound connections with user-driven input at the process level under the assumption that user intent is implied by user-driven input. As a complement to existing prevention system, proposed IDS decreases the danger of information leak and protects computers and networks from more severe damage.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• 제37권9호
• /
• pp.1133-1140
• /
• 2013

A computer model is a useful tool that provides solution via physical modeling instead of expensive testing. In reality, however, it often does not agree with the experimental data owing to simplifying assumption and unknown or uncertain input parameters. In this study, a Bayesian approach is proposed to calibrate the computer model in a probabilistic manner using the measured data. The elasto-plastic analysis of a pyrotechnically actuated device (PAD) is employed to demonstrate this approach, which is a component that delivers high power in remote environments by the combustion of a self-contained energy source. A simple mathematical model that quickly evaluates the performance is developed. Unknown input parameters are calibrated conditional on the experimental data using the Markov Chain Monte Carlo algorithm, which is a modern computational statistics method. Finally, the results are applied to determine the reliability of the PAD.

• Journal of Advanced Navigation Technology
• /
• 제19권2호
• /
• pp.133-139
• /
• 2015

This paper surveys vision based autonomous navigation technologies for unmanned systems. Main branches of visual navigation technologies are visual servoing, visual odometry, and visual simultaneous localization and mapping (SLAM). Visual servoing provides velocity input which guides mobile system to desired pose. This input velocity is calculated from feature difference between desired image and acquired image. Visual odometry is the technology that estimates the relative pose between frames of consecutive image. This can improve the accuracy when compared with the exisiting dead-reckoning methods. Visual SLAM aims for constructing map of unknown environment and determining mobile system's location simultaneously, which is essential for operation of unmanned systems in unknown environments. The trend of visual navigation is grasped by examining foreign research cases related to visual navigation technology.

• Smart Structures and Systems
• /
• 제31권3호
• /
• pp.229-245
• /
• 2023

The absence of excitation measurements may pose a big challenge in the application of structural damage identification owing to the fact that substantial effort is needed to reconstruct or identify unknown input force. To address this issue, in this paper, an iterative strategy, a synergy of Tikhonov regularization method for force identification and modified Jaya algorithm (M-Jaya) for stiffness parameter identification, is developed for damage identification with partial output-only responses. On the one hand, the probabilistic clustering learning technique and nonlinear updating equation are introduced to improve the performance of standard Jaya algorithm. On the other hand, to deal with the difficulty of selection the appropriate regularization parameters in traditional Tikhonov regularization, an improved L-curve method based on B-spline interpolation function is presented. The applicability and effectiveness of the iterative strategy for simultaneous identification of structural damages and unknown input excitation is validated by numerical simulation on a 21-bar truss structure subjected to ambient excitation under noise free and contaminated measurements cases, as well as a series of experimental tests on a five-floor steel frame structure excited by sinusoidal force. The results from these numerical and experimental studies demonstrate that the proposed identification strategy can accurately and effectively identify damage locations and extents without the requirement of force measurements. The proposed M-Jaya algorithm provides more satisfactory performance than genetic algorithm, Gaussian bare-bones artificial bee colony and Jaya algorithm.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• 제15권2호
• /
• pp.1020-1026
• /
• 2014

A problem of sliding mode control is chattering because of controle input signal included unknown disturbance and nonlinear input parameters. This paper presents a sliding mode controller design to inverted pendulum system. In this paper, a sliding mode control algorithm to reduce a chattering is proposed. The reduction of chattering is accomplished by smoothing function for nonlinear control input. In this method, the dynamic equations of the inverted pendulum is decoupled by considering nonlinear parameters and external disturbances. Therefore, this study is applied to obtain switching control inputs for sliding mode controller. The proposed technique is tested to the control of inverted pendulum through computer simulations. The result shown reduced chattering in control input.

• Structural Engineering and Mechanics
• /
• 제63권6호
• /
• pp.789-797
• /
• 2017

Recently, some integrated structural identification/damage detection and reliability evaluation of structures with uncertainties have been proposed. However, these techniques are applicable for off-line synthesis of structural identification and reliability evaluation. In this paper, based on the recursive formulation of the extended Kalman filter, an on-line integration of structural identification/damage detection and reliability evaluation of stochastic building structures is investigated. Structural limit state is expanded by the Taylor series in terms of uncertain variables to obtain the probability density function (PDF). Both structural component reliability with only one limit state function and system reliability with multi-limit state functions are studied. Then, it is extended to adopt the recent extended Kalman filter with unknown input (EKF-UI) proposed by the authors for on-line integration of structural identification/damage detection and structural reliability evaluation of stochastic building structures subject to unknown excitations. Numerical examples are used to demonstrate the proposed method. The evaluated results of structural component reliability and structural system reliability are compared with those by the Monte Carlo simulation to validate the performances of the proposed method.

• Journal of Institute of Control, Robotics and Systems
• /
• 제6권2호
• /
• pp.155-163
• /
• 2000

This paper presents a path planning method of the sensor based intelligent vehicle using fuzzy logic controller for avoidance of moving obstacles in unknown environments. Generally it is too difficult and complicated to control intelligent vehicle properly by recognizing unknown terrain with sensors because the great amount of imprecise and ambiguous information has to be considered. In this respect a fuzzy logic can manage such the enormous information in a quite efficient manner. Furthermore it is necessary to use the relative velocity to consider the mobility of obstacles, In order to avoid moving obstacles we must deliberate not only vehicle's relative speed toward obstacles but also self-determined acceleration and steering for the satisfaction of avoidance efficiency. In this study all the primary factors mentioned before are used as the input elements of fuzzy controllers and output signals to control velocity and steering angle of the vehicle. The main purpose of this study is to develop fuzzy controllers for avoiding collision with moving obstacles when they approach the vehicle travelling with straight line and for returning to original trajectory. The ability are and effectiveness of the proposed algorithm are demonstrated by simulations and experiments.