• Steel and Composite Structures
• /
• 제51권5호
• /
• pp.575-586
• /
• 2024

Steel arch supports are used in mines and underground structures to provide stability. Most of the supports are made up of overlapping arches. They can behave either yieldingly or unyieldingly. If the normal force at any point of overlapping equals the slip resistance, the slide occurs. This paper presents a solution procedure for determining the load-carrying capacity of steel arch supports in the yielding implementation. This solution considers the effects of several significant elements, including differing materials and the number of clamps in yielding friction joints. The direct stiffness method is applied. The solution contains geometric, physical, and structural nonlinearity. The results obtained from numerical modeling using the provided procedure are compared to laboratory tests conducted at GIG Katowice in 2012. They show a good correlation with previously collected data from equivalent laboratory conditions.

• 한국안전학회지
• /
• 제30권2호
• /
• pp.41-47
• /
• 2015

Recently, a lot more disasters in the temporary structures happen because the stabilities of the temporary structures are disregarded by the reduction of the unit cost, using defective materials, the existing materials and so on. Pipe supports, which are one of the temporary structures, are basically used for the most constructing works such as buildings, bridges, plants and so on. In the most sites, adequate support installations of the pipe supports have not been performed although the presence of the guideline legally and institutionally. In this study, therefore, the collapse accidents of the pipe supports were investigated on the basis of theoretical analysis as well as the buckling tests by simulating the site support condition. Both the theocratical analysis and test results show that the buckling load in the fixed ends is at least 4 times larger than one in the pinned ends. This results will be utilized for safety assurance as well as accident prevention the in the field application.

• 지역사회간호학회지
• /
• 제29권4호
• /
• pp.404-413
• /
• 2018

Purpose: The purpose of this study is to construct and verify a path model for the influencing factors on occupational stress of Vietnamese migrant workers in Korea. Methods: Participants were 193 Vietnamese migrant workers recruited from Foreign Workers Support Centers. Data were collected by a self-administered survey with copies of a Questionnaire written in Vietnamese. Data were analyzed with descriptive statistics, Pearson's correlation coefficients and path analysis using SPSS/WIN 23.0 and Amos 20.0 program. Results: Length of residence, homeland friends' and Korean colleagues'supports, and acculturation have been found to have significant direct effects on occupational stress of Vietnamese migrant workers. Meanwhile, Length of residence, homeland friends', Korean colleagues', and their families' supports showed indirect effects on their occupational stress. What had the greatest direct effect on occupational stress of Vietnamese migrant workers was Korean colleagues' support. Conclusion: For reducing occupational stress of Vietnamese migrant workers, it is necessary to strengthen their Korean colleagues' supports in work places. In addition, community organizations should take strategies to enhance homeland friends' supports and to improve acculturation of Vietnamese migrant workers.

• Structural Engineering and Mechanics
• /
• 제76권2호
• /
• pp.239-250
• /
• 2020

This paper deals with free vibration of plates with steps and internal line supports by using a modified matched interface and boundary (MMIB) method. Different kinds of interfaces caused by steps, rigid and elastic line supports and their combinations are taken into account. Detailed MMIB procedures for dealing with these different interfaces are presented. Various examples are chosen to illustrate the accuracy and convergence of MMIB method. Numerical results show that the proposed MMIB is a highly accurate and convergent approach for solving the title issue. This study will extend the application range of MMIB method.

• 한국멀티미디어학회:학술대회논문집
• /
• 한국멀티미디어학회 2012년도 춘계학술발표대회논문집
• /
• pp.102-105
• /
• 2012

ONVIF is becoming a de factor standard specification for supporting interoperability among network video products, which also supports a specification for video analytics service. A smart IP network camera is an IP network supporting video analytics. In this paper, we present our efforts in integrating ONVIF Video Analytics Service into our currently developing smart IP network camera(SS IPNC; Soongsil Smart IP Network Camera). SSIPNC supports object detection, tracking, classification, and event detection with proprietary configuration protocol and meta data formats. SSIPNC is based on TI' IPNC ONVIF implementation which supports ONVI Core specification, and several ONVIF services such as device service, imaging service and media service, but not video analytics service.

• 한국환경과학회지
• /
• 제17권7호
• /
• pp.711-717
• /
• 2008

The use of support materials on the nanoparticle synthesis and applications has advantages in many aspects; resisting the aggregation and gelation of nanoparticles, providing more active sites by dispersing over the supports, and facilitating a filtering process. In order to elucidate the influence of the supports on the nitrate reduction reactivity, the supported iron nanoparticles were prepared by borohydride reduction of an aqueous iron salt in the presence of supports such as activated carbon, silica and polyethylene. The reactivity for nitrate reduction decreased in the order of unsupported Fe(0) > activated carbon(AC) supported Fe(0) > polyethylene(PE) supported Fe(0) ${\ge}$ silica supported Fe(0). Rate constants decrease with increasing initial nitrate concentration implying that the reaction is limited by the surface reaction kinetics.

• Structural Engineering and Mechanics
• /
• 제19권2호
• /
• pp.217-230
• /
• 2005

A steel silo traditionally consists of a cylindrical and a conical shell. In order to facilitate emptying operations, the cylinder is placed on local supports. This may lead to dangerous stress concentrations and eventually to local instability of the cylindrical wall. In this contribution, the locally supported cylinder is strengthened by means of ring stiffeners and longitudinal stiffeners and the effect of their dimensions on the buckling stress is investigated. This study leads to a number of diagrams, each of them representing the effect of one of the dimensions on the buckling stress. In each diagram, the failure pattern corresponding to the buckling stress is indicated.

• Structural Engineering and Mechanics
• /
• 제88권2호
• /
• pp.109-115
• /
• 2023

In this paper, frequencies of zigzag structure of carbon nanotubes isinvestigated based on Donnell shell theory. These tubes are wrapped with the ring supports in the axial direction. The fundamental frequency curves displayed in article show the dependence of vibrations attributes to zigzag single walled carbon nanotubes. Various zigzag indices are introduced against the variation of length to predict the vibration. Also, the influence of ring supports is sketched with proposed structure for frequency analysis. The frequencies of zigzag tube decreases as the length increases. It is observed that the frequencies decreases with ring support and have higher frequencies without ring. The problem is formulated using Partial Differential Equation. Three expressions of modal deformation displacement functions is used for the elimination of temporal variation to form the solution in the eigen from. For the stability of present study the results are compared with experimentally and numerically in the open text.

• 대한토목학회논문집
• /
• 제33권4호
• /
• pp.1303-1313
• /
• 2013

본 연구에서는 콘크리트 슬래브 궤도를 가지는 교량의 사용성 검토에 있어 단위 축하중, 단위 수직 단차, 단위 회전에 의해 발생되는 레일 지지점의 작용력에 대한 기준 값을 구하였다. 해석방법에 있어서는 레일이 탄성 스프링에 의해 연속적으로 지지되는 모델과 이산적으로 지지되는 모델이 이용되었다. 해석결과 얻어진 레일 지지점에서의 작용력은 콘크리트 궤도의 사용성 검토에서 참조되고 있는 DS 804 기준에 제시된 값과 비교되였으며, 그 결과는 잘 일치하였다. 또한, 레일 지지점의 간격과 체결장치의 강성이 레일 지지점에서의 작용력에 미치는 영향을 분석하였다.

• 분석과학
• /
• 제27권1호
• /
• pp.27-33
• /
• 2014

This study described about preparation of the cross-linked silk fibroin (SF) film by ${\gamma}$-irradiation of the casted SF film, which is fabricated from aqueous solution regenerated via fibers of cocoons and their application as supports for human cell culture. The properties of cross-linked SF film were evaluated by FT-IR spectroscopy, contact angle, solubility to water, thermal analysis, surface area analyzer, and morphology via scanning electron microscopy (SEM). The cross-linked SF films were not dissolved in water and exhibited the rough surface morphology, large surface area, and good thermal properties. The human fibroblast cell (CCD-986sk) and embryo kidney-ft cell were well growed on the surface of cross-linked SF film supports prepared by ${\gamma}$-irradiation. The cross-linked SF film prepared by ${\gamma}$-irradiation can be used as biomaterials for human cell culture.