• Safe Food
• /
• 제9권1호
• /
• pp.4-12
• /
• 2014

• International conference on construction engineering and project management
• /
• The 9th International Conference on Construction Engineering and Project Management
• /
• pp.579-586
• /
• 2022

Modular building is a fast-growing construction method, mainly due to its ability to drastically reduce the amount of time it takes to construct a building and produce higher-quality buildings at a more consistent rate. However, while modular construction is relatively safer than traditional construction methods, workers are still exposed to hazards that lead to injuries and fatalities, and these hazards could be controlled using emerging smart technologies. Currently, limited information is available at the intersection of modular construction, safety risk, and smart safety technologies. This paper aims to investigate what aspects of modular construction are most dangerous for its workers, highlight specific risks in its processes, and propose ways to utilize smart technologies to mitigate these safety risks. Findings from the archival analysis of accident reports in Occupational Safety and Health Administration (OSHA) Fatality and Catastrophe Investigation Summaries indicate that 114 significant injuries were reported between 2002 and 2021, of which 67 were fatalities. About 72% of fatalities occurred during the installation phase, while 57% were caused by crushing and 85% of crash-related incidents were caused by jack failure/slippage. IoT-enabled wearable sensing devices, computer vision, smart safety harness, and Augment and Virtual Reality were identified as potential solutions for mitigating identified safety risks. The present study contributes to knowledge by identifying important safety trends, critical safety risk factors and proposing practical emerging methods for controlling these risks.

• Journal of the Korean Society of Safety
• /
• 제20권3호
• /
• pp.1-8
• /
• 2005

The industrial induction motor is widely used in the rotating electrical machine for the transmission of power. It is very reliable equipment, but it could lead to the loss of production and lift when failure occurs. Therefore, the failure data is acquired and analyzed by attaching an exclusive instrument to existing induction motor. However, these instruments could lead to side effects, increasing the production costs, because they are very expensive. The purpose of this study is the development of an induction motor bearing failure diagnosis system constructed using LabVIEW which can be supplied the kernelled function, process monitoring and current signature analysis. In addition, the availability and reasonability of the constructed system was examined for an induction motor with failure defects in outer raceway and ball bearing. From the results, it shows that failure diagnosis system constructed is useful for real-time monitoring with detection of bearing defects over the web.

• Steel and Composite Structures
• /
• 제42권3호
• /
• pp.299-313
• /
• 2022

Steel-concrete-steel composite structures with bidirectional webs (SCSBWs) are used in large-scale projects and exhibit good mechanical performances and constructional efficiency. The shear behaviors of SCSBW deep beam members in key joints or in locations subjected to concentrated forces are of concern in design. To address this issue, experimental program is investigated to examine the deep-beam shear behaviors of SCSBWs, in which the cracking process and force transfer mechanism are revealed. Compared with the previously proposed truss model, it is found that a strut-and-tie model is more suitable for describing the shear mechanism of SCSBW deep beams with a short span and sparse transverse webs. According to the experimental analyses, a new model is proposed to predict the shear capacities of SCSBW deep beams. This model uses strut-and-tie concept and introduces web shear and dowel action to consider the coupled multi mechanisms. A stress decomposition method is used to distinguish the contributions of different shear-transferring paths. Based on case studies, a simplified model is further developed, and the explicit solution is derived for design efficiency. The proposed models are verified using experimental data, which are proven to have good accuracy and efficiency and to be suitable for practical application.

• Journal of IKEEE
• /
• 제24권4호
• /
• pp.1180-1183
• /
• 2020

Recently, the daily life safety detection functionalities such as fall accident detection and burn danger detection are widely disseminated along with the development of IoT and smart home. These safety detection functionalities are mostly performed by artificial intelligence. However, simple accuracy measurement of the safety detection in laboratory environment is often far from practical performance in daily life environment. To mitigate this problem, this paper introduces two techniques, i.e. living lab and confusion matrix. Living lab is more than simple simulation of daily life environment, and it enables users to directly participate technology development and product design. Various performance measures induced from confusion matrix significantly help to evaluate the performance of artificial intelligence system for proper application purposes.

• Journal of the Korea Safety Management & Science
• /
• 제18권4호
• /
• pp.81-90
• /
• 2016

Research and development activities have been actively conducted at universities, research institutions and research laboratories which belong to corporations. Because of blooming research and development activities in various fields, safety accidents in the laboratories happen consistently. The government office established Act on the establishment of safe laboratory environment to decrease safety accident rates and make environment of laboratories better, and it is effective slowly. However, in the case of laboratory safety management of the laboratory where various research and development activities are carried out. So it is difficult to closely monitor them. Even though safety inspections and periodic inspections is regularly conducted, these are focused on facilities and environment. According to a study of Dea-deok science town safety council, accidents in laboratories of 73% have arisen out of careless actions. Therefore, it is important for researchers to know to potential harmful factors in research. there is necessary to make a system to prevent laboratory accidents. The purpose of this study is that the researchers discovered potential hazard factors in laboratories. For that, foreign laboratory safety management systems has applied to domestic laboratories. Four laboratories in targeted institution has been selected to apply the appropriate personal protection equipments, job safety assessment and standard operating procedures. And I found the limitations of the process according to the excavations harmful factors in the research process. To overcome these limitations, Suggest a laboratory safety management system. This study discovered current laboratory safety system limitations and provides alternatives so that effective safety management can be achieved.

• Food Science of Animal Resources
• /
• 제43권4호
• /
• pp.685-702
• /
• 2023

Lactic acid bacteria (LAB) are commonly used as probiotics; however, not all LAB strains have the same beneficial effects. To successfully use LAB as probiotics in canines, LAB species should originate from the canine intestinal tract as they display host specificity. The objective of this study was to investigate the phenotypic and genomic traits of potential probiotic LAB isolated from canine fecal samples. Twenty LAB samples were evaluated for their potential probiotic characteristics including resistance to low pH, bile salts, hydrophobicity, auto-aggregation, co-aggregation, adhesion to epithelia or mucosa, and production of inhibitory compounds. Additionally, we evaluated their safety and other beneficial effects on canine health, such as DPPH free radical scavenging, and β-galactosidase. Four strains demonstrated potential probiotic characteristics and were selected: Enterococcus hirae Pom4, Limosilactobacillus fermentum Pom5, Pediococcus pentosaceus Chi8, and Ligilactobacillus animalis FB2. Safety evaluations showed that all strains lacked hemolytic activity, could not produce biogenic amines, and did not carry any pathogenic genes. In addition, L. fermentum Pom5 and P. pentosaceus Chi8 displayed susceptibility to all antibiotics and concordant with the absence of antibiotic resistance genes. Based on their phenotypic and genomic characteristics, L. fermentum Pom5 and P. pentosaceus Chi8 were identified as potential probiotic candidates for canines.

• Safe Food
• /
• 제4권4호
• /
• pp.47-54
• /
• 2009

• Proceedings of the Korean Information Science Society Conference
• /
• 한국정보과학회 2005년도 한국컴퓨터종합학술대회 논문집 Vol.32 No.1 (B)
• /
• pp.334-336
• /
• 2005

본 논문은 정형 명세 언어인 Esterel이 가지는 취약점을 보안하기 위해 Safety-Critical Aided Development Environment를 추가로 활용하여 신뢰성 있고 안전적인 임베디드 제어 소프트웨어 개발을 위한 기법을 제시하고 있다. 그 뿐만 아니라 제시한 기법을 이용하여 개발된 간단한 자동 강속 제어 소프트웨어를 인터페이스와 기능 부분에 대해서 각각 확인 및 검증을 수행한 후 임베디드 시스템인 레고 마인드 스톰으로 제작된 차량 로봇에 탑재한 후 실험을 하고, 실험을 통해 기존 개발 기법과의 차이점을 분석한다.

• The Journal of Korean Medicine
• /
• 제27권1호
• /
• pp.78-90
• /
• 2006

Background : Traditional herbal medicine is used extensively among the Korean populations, and other Asian countries employ similar therapies as well. In recent years, extensive focus was laid on adulteration of the herbal medicine with liver damage. The use of herbal preparations as remedies for various medical conditions has continuously increased in Korea. Large proportions of Korean patients use herbal medicinal products, folk remedies, and health food. However, studies on the safety of herbal products are conducted on a less than sufficient basis even in the countries like Korea where herbal medicine is being used extensively. Some of the reports on the safety of herbs were done by the doctors of western medicine but lack of knowledge and misclassification led to misunderstandings. Objectives : This study aims to verify the evidences on safety of frequently used 4 herbal medications (Sipjeondaebo-tang, Bojungikgi-tang, Ohjeok-San, Yukmaijihwang-tang) in the lab animal model. Methods : Sprague-Dawley rats was treated by 4 herbal medications during 31 days. After 1 month, we checked body weight, liver weight, and serum enzyme associated with liver function. Results : There is no significant difference in body weight and liver weight after 1 month of administrations. In all experimental groups, no abnormal findings was observed in histotogical research and lab liver Functions test(AST, ALT etc). Conclusions : These four herbal medications, frequently used in oriental medicine clinics and hospitals, are safe from hepatoxic events in the lab animal model.