• 한국구조물진단유지관리공학회 논문집
• /
• 제25권1호
• /
• pp.33-40
• /
• 2021

최근 국내 건설 사업은 대형화 및 복잡화됨에 따라 건설 산업재해도 증가하고 있다. 그 중 상당수가 가설공사와 가설구조물과 연관성이 있지만, 짧은 운영기간과 계속적으로 변화하는 건설현장 특성으로 인해 현장 안전관리가 미비한 실정이다. 시스템 동바리는 콘크리트의 타설 하중을 지지하기 위한 가설구조물 중 하나로써, 제작 시 결합부를 미리 부착해 설치 및 해체에 용이해 최근 적용성이 증가하고 있다. 하지만 다수의 부재로 이루어진 시스템 동바리는 부재간의 연결성 및 수직부재의 지점조건 등 여전히 불확실성을 가지고 있어 붕괴사고의 위험성이 있다. 따라서 본 연구는 시스템 동바리의 구조계 및 하중, 사고사례를 분석하여 연결부 및 지점조건, 횡변위 발생의 손상 시나리오를 정의하였다. 손상 시나리오와 함께 단위 구조계를 정의하여 임계 좌굴하중 감소율을 분석하였다. 또한, 각 손상 시나리오별 취약부재를 도출함으로써 시스템 동바리의 설계 및 시공, 운영 시 안정성을 분석할 수 있는 기초 결과를 제시하였다.

• 한국포장학회지
• /
• 제21권1호
• /
• pp.11-17
• /
• 2015

글로벌 산업화 및 경제성장으로 국내외 교역량이 증가함에 따라 국가 물류비 부담이 지속적으로 상승되면서, 선진국이나 글로벌 선진기업의 경우와 마찬가지로 국내에서도 이러한 국가물류비 감소를 통한 산업 경쟁력 제고를 위해 다양한 물류 효율화를 시도해 왔다. 특히 2000년대 초반 유닛로드시스템(Unit Load System)을 도입을 통해 T11($1100{\times}1100mm$)의 표준파렛트를 설정하였고, 이를 기준으로 포장 모듈 및 물류 설비가 정합성을 유지하도록 물류설비인증제도를 시행함으로써 물류표준화 확산과 동시에 3자 물류의 확산을 통한 물류효율화가 진행되면서 국가물류비 절감에 상당부분 기여해왔으나, 최근 인증수요의 감소와 함께 GDP 대비 국가물류비 비율에서 아직 선진국과 약 3%정도 격차를 보이고 있다. 따라서, 본 연구에서는 국내 물류분야 인증제도에 대한 현황 및 실효성 분석을 통해 국가 물류 효율화 및 선진화와 동시에 물류산업 활성화를 위한 정책적 전략으로서의 물류인증 활성화 방안으로 인증 수요자의 니즈를 충족하는 수요기반의 물류인증제도 도입을 제안하였다. 즉, 동북아 교역량의 증가에 대응한 순환물류시스템(Returnable Transport System) 도입 필요성을 반영한 '동북아 물류설비 인증' 개발과 전자 상거래의 초국경적 글로벌 유통에 따른 '안전운송 인증'과 같은 수요기반의 인증 도입을 통해 물류산업 지원과 활성화에 기여할 것으로 기대된다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제36권7호
• /
• pp.935-941
• /
• 2012

This paper describes a study of conventional electrical rig and simulated application of Flywheel Energy Storage system on the power system of the offshore plants with dynamic positioning system with the following aims: improve fuel consumption on engines, prevent blackout and mitigate voltage sags due to pulsed load and fault. Fuel consumption has been analyzed for the generators of the typical drilling rigs compared with the power plant with Flywheel Storage Unit which has an important aid in avoiding power interruption during DP (Dynamic Positioning) operation. The FES (Fly wheel Energy storage System) releases energy very quickly and efficiently to ensure continuity of the power supply to essential consumers such as auxiliary machinery and thrusters upon main power failure. It will run until the standby diesel generator can start and supply the electric power to the facilities to keep the vessel in correct position under DP operation. The proposed backup method to utilize the quick and large energy storage Flywheel system can be optimized in any power system design on offshore plant.

• 대한안전경영과학회지
• /
• 제5권1호
• /
• pp.33-43
• /
• 2003

Enormous stocks by the reduced life cycle of products caused by the technological innovation in later 20 century, development of new materials and diversified demands of customers appeared as the pressing element causing the trouble in management of companies, and when considering the logistic costs that are imposed to companies in terms of function, the costs related to the stock topped the list of costs, followed by the transportation ones, and for pallet pool system, inventory of stocks is very difficult by the number of companies. Reducing the logistic cost may be accomplished by numbers of logistic management methods, but the most fundamental and essential one is the accomplishment of the consistent pallet system that is the core of unit load system, and the purpose of consistent pallet system is the treatment of logistic functions such as transportation, storage and unloading with consistent pallet system, and increasing the turnover ratio is required for the improvement of the system. As the turnover ratios is increased, more pallets will be used so, numbers of empty pallets will be increased accordingly by returning the pallet. Therefore, in this study, we will establish the effective stock management system by comparing with the other existing stock management system after looking at the concept and examples of pallet full system in order to resolved this kind of problem.

• 대한안전경영과학회:학술대회논문집
• /
• 대한안전경영과학회 2002년도 추계학술대회
• /
• pp.227-232
• /
• 2002

Enormous flocks by the reduced life cycle of products caused by the technological innovation if later 20 century, development of new materials and diversified demands of customers appeared as the pressing element causing the trouble in management of companies, and when considering the logistic costs that are imposed to companies in terms of function, the costs related to the stock topped the list of costs, followed by the transportation ones, and for pallet pool system, inventory of stocks is very difficult by the number of companies. Reducing the logistic cost may be accomplished by numbers of logistic management methods, but the most fundamental and essential one is the accomplishment of the consistent pallet system that is the core of unit load system, and the purpose of consistent pallet system is the treatment of logistic functions such as transportation, storage and unloading with consistent pallet system, and increasing the turnover ratio is required for the improvement of the system. As the turnover ratios is increased, more pallets will be used so, numbers of empty pallets will be increased accordingly by returning the pallet. Therefore, in this study, we will establish the effective stock management system by comparing with the other existing stock management system after looking at the concept and examples of pallet full system in order to resolved this kind of problem.

• 조명전기설비학회논문지
• /
• 제12권4호
• /
• pp.75-80
• /
• 1998

본 논문에서는 DSP 장치와 개인용 컴퓨터를 연계한 실시간 인버터 특성 분석 시스템을 제안하였다. 전력 변환 시스템은 제어 대상과 용도에 따라 회로를 셜계한다. 그리고 설계된 전력 변환 시스랩은 입력 조건에 따라 시스템의 제어특성이 평가된다. 따라서 제어방법을 연구하기 위해서는 전력 변환 시스템이 필요하고, 이를 평가하기 위한 관측 시스랩이 필요하다. 제안한 실시간 특성 분석 시스랩을 평가하기 위하여 인버터 시스템을 구성하였다. 그리고 개인용 컴퓨터를 이용하여 입력 제어 조건에 따라 유도전동기를 구동하였다. 이때 얻어지는 인버터 출력 특성 및 제어특성올 다양하게 분석하였다.

• Transactions on Electrical and Electronic Materials
• /
• 제18권2호
• /
• pp.111-118
• /
• 2017

The increased diversity of different types of energy sources requires moving towards smart distribution networks. This paper proposes a probabilistic DG (distributed generation) units planning model to determine technology type, capacity and location of DG units while simultaneously allocating ESS (energy storage systems) based on pre-determined capacities. This problem is studied in a wind integrated power system considering loads, prices and wind power generation uncertainties. A suitable method for DG unit planning will reduce costs and improve reliability concerns. Objective function is a cost function that minimizes DG investment and operational cost, purchased energy costs from upstream networks, the defined cost to reliability index, energy losses and the investment and degradation costs of ESS. Electrical load is a time variable and the model simulates a typical radial network successfully. The proposed model was solved using the DICOPT solver under GAMS optimization software.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제54권7호
• /
• pp.343-350
• /
• 2005

Conventionally, for transferring the primary power to the secondary one, the high frequency series resonant converter has been widely used for the contactless power supply system. However, the high frequency series resonant converter has the disadvantages such as the low efficiency, the high voltage gain characteristics and deviation of the phase angle in the overall load range. To improve this disadvantages, In this paper, the characteristics of the high efficiency and unit voltage gain as well as in-phase are revealed in the proposed three-level LCLC (Inductor-Capacitor- Inductor-Capacitor) resonant converter. The results are verified on the simulation based on the theoretical analysis and the 4kW experimental Prototype.

• 대한안전경영과학회:학술대회논문집
• /
• 대한안전경영과학회 2005년도 추계학술대회
• /
• pp.1-9
• /
• 2005

Along with the increasing trade volume among Korea, China, and Japan, firm and efficient logistics management through mutual co-operation Is being highly requested. In order to achieve logistics efficiency, logistics standardization should precede. Using standardized pallet is the core of logistics standardization which is closely connected to the unit load system and palletization. This study focuses on pallet standardization in three countries which are Korea, China, and Japan. The dramatic effect from pallet standardization Is expected in economy / international trade field and logistics / environment field. This study suggests an institute of Asian logistics standardization as a method to accomplish the logistics standardization among three countries. When these three countries overcome the disparity in standardization level and diverse concerns, we will finally attain efficient logistics system which will work as a 'highway' of North-East Asian logistics.

• 대한산업공학회지
• /
• 제30권3호
• /
• pp.190-196
• /
• 2004

In this paper, we address a layout design problem, PTL[3], for determining an optimal 3-class-based dedicated linear storage layout in a class of unit load storage systems. Our objective is to minimize the expected single command travel time. We analyze PTL[3] to derive a fundamental property that an optimal solution to PTL[3] is one of the partitions based on the PAI(product activity index)-nonincreasing ordering. Using the property and partial enumeration, we construct an efficient exact algorithm with O $(n\;{\lceil}\;log\;n\;{\rceil}\;)$ for solving PTL[3].