• 한국컴퓨터정보학회:학술대회논문집
• /
• 한국컴퓨터정보학회 2023년도 제68차 하계학술대회논문집 31권2호
• /
• pp.505-506
• /
• 2023

본 논문은 임베디드시스템을 적용한 대용량 고부하 레이다 플랫폼의 구동 제어 방안을 제안한다. 군사적 방어 목적용 지대공 유도 미사일 시스템의 구성품인 다기능 레이다 시스템은 고중량의 안테나를 구동해야하는 대용량 고부하 레이다 구동 플랫폼이 필수이다. 이 다기능 레이다 시스템은 360도 방위각 전방향을 일정한 속도로 방위각 회전하며 감시정찰 및 방어 임무를 수행한다. 여기서 대부하 레이다 구동 플랫폼은 방위각회전 구동장치를 이용하여 일정한 속도로 360도 방위각 방향으로 안정적인 회전을 가능하도록 구동 제어한다. 본 구동 제어를 실시간으로 구현하기 위해 임베디드시스템인 DSP(Digital Signal Processor)가 포함된 제어모듈은 구동모듈에 회전구동 명령을 인가하여 일정한 회전각속도로 구동하도록 회전구동 모터를 실시간 제어한다. 고부하 레이다 플랫폼은 직구동모터타입의 회전구동모터, 회전체에 신호와 전원을 공급하기 위한 회전슬립링, 회전체의 회전각도를 측정하기 위한 회전센서로 구성된 방위각회전구동장치와 전체 전원을 공급받아 사용 목적에 맞게 변환하여 공급하는 전원모듈, 구동모터에 구동전원을 공급하기 위한 구동모듈, 회전구동 명령에 따라 구동제어하기 위한 제어모듈로 구성된 제어장치로 구분된다. 본 논문에서는 대부하 레이다 구동 플랫폼을 시뮬레이션 모델링으로 구현하고 제안하는 구동 제어 방안은 구동제어시뮬레이션으로 검증한다.

• 한국입자에어로졸학회지
• /
• 제5권2호
• /
• pp.37-43
• /
• 2009

Particulate matter (PM) is one of the major indoor air pollutants especially in the subway station in Korea. In order to remove PM in the subway station, several kinds of PM removal system such as roll-filter, auto-washable air filter, demister, and electrostatic precipitator are used in the air handling unit (AHU) of subway stations. However, those systems are prone to operation and maintenance problems since the filter-regeneration unit consisting of electrical or water jet parts might malfunction due to the high load of particulates unless the filter medium is periodically replaced. In this study, the use of axial-flow cyclone was proposed for particulate filter unit in the AHU for its low operation and maintenance cost. Novel shape of axial-flow cyclone was designed by using computational fluid dynamics (CFD). The shape of vortex vane was optimized in terms of pressure drop and tangential velocity. In addition, CFD analysis was validated experimentally through the pressure drop measurement of mock-up model. We found that pressure drop and tangential velocity of fluid through the axia-flow cyclone was significantly affected by the rotating degree of vortex vane and the numerical prediction of pressure drop agreed well with experimental measurement.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.548-552
• /
• 2003

In the braking system, the friction force is the most important factor of the design. For long time, many researchers have been strived for getting the exact friction coefficients. But the friction coefficients are affected by the road condition and changed by lots of parameters, such as normal force and characteristics between two contacted materials, temperature, etc. For the development of ABS of the aircraft, HILS(Hardware-In-the-Loop-Simulation) test and dynamometer test was carried out. For the calculation of the friction coefficients, the wheel moments were measured using the load cell mounted on the housing of the wheel. The test conditions were dry and greasy, as the 0.7 and 0.4 in friction coefficient, respectively. In this paper, the test results of the friction coefficients were represented and the improvement method was suggested.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2001년도 Proceedings ICPE 01 2001 International Conference on Power Electronics
• /
• pp.635-638
• /
• 2001

Photovoltaic (PV) pumping systems with maximum power point tracking (MPPT) technique aims at obtaining the highest possible power to the pump under various insolation and temperature, thus overcomes the mismatch between the photovoltaic panel and the pumping load. A simple method of tracking the maximum power points and forcing the system to operate close to these points is presented in this paper. The MC68HC908GP32 micro control unit (MCU) is employed to implement the proposed MPPT controller. Experimental results will also show the performances of the photovoltaic pumping system with the MPPT technique.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 하계학술대회 논문집 B
• /
• pp.1091-1093
• /
• 2001

The power semiconductor is widely used in the power plant or industrial field because of genealization and enlargement. It has been controlled and operated according to its own control method. Especially in case of Power plant, it plays a major role in AVR(Automatic Voltage Regulator) or electro chlorination control circuits. Generally, they used in Analog control system at above field. But each SCR current value is different because of load unbalance or switching characteristic variations, it may cause power plant unit trip or system disorder according to SCR element burn out or bad operating condition. Therefore, in this paper a development of 3 phase current balance control algorithm is described. it gets over the past analog control system limit, controls SCR gate firing angle for 3 phase current balance.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 춘계학술대회 논문집 전력기술부문
• /
• pp.95-99
• /
• 2001

Frequency is the unique physical value for all the interconnected systems. Therefore. the load frequency control is in the responsibility of all members in the interconnection power unbalance in one of the interconnected system can cause the problems in others. In the following text a brief description and the role of frequency in an interconnected system will be presented. Following is the short description of the Balkan Interconnection (UCTE Second Synchronous Zone) with schematic diagram. A Power-Frequency (P-f) dynamic model of a control area wil1 be shown. Model gives the analytical solution for frequency change versus a time after outage of a generator in the power system. This model will be applied to the Balkan Interconnection and compared with numerical approach. Advantages and drawbacks of the analytical method will be discussed Purpose of using this model is to investigate if the pumps in reversible hydropower plant will be underfrequency shed after the outage of the biggest generator unit in the interconnection, according %o (n-1) security postulate.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 1996년도 추계학술대회 논문
• /
• pp.156-160
• /
• 1996

In this study of made Unloader is moving linear transfer system for mainly plastic working or forming of small electronic unit and other at press line. This machine for lading and unloading a workpiece has been installed in a press in order to load and unload a workpiece form a press die. Control method be used PLC. it took data of input from each sensor and send signal of output to actuator today we have a lot of problem at work of press line. most of press work be operated by human so they often hurted terreble accident by press machine. Because press working system in automotive factories are now changing over to a transfer press working system this Unloader will give more easily and speedy production and manpower saving less of pruduction cost high perfomance

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1997년도 하계학술대회 논문집 B
• /
• pp.696-698
• /
• 1997

The marine diesel engine have been widely applied with a mechanical hydraulic governor to control the ship speed for long time. But it was recently very difficult for the mechanical hydraulic governor to control the speed of engine under the condition of low speed and low load because of jiggling by rough fluctuation of rotating torque and hunting by dead time of diesel engine. In order to analyze the speed control system the transfer function was converted from z to w transformation. The author proposed velocity control system with feedback loop by PID controller in order to stabilize for unstable area. The influence of dead time was discussed by Nichols chart and unit step response curve. It was confirmed through computer simulation that the performance improvement of a mechanical hydraulic governor can be obtained by PID controller.

• 설비공학논문집
• /
• 제21권6호
• /
• pp.326-332
• /
• 2009

The purpose of the study is to decrease the refrigerant temperature at the outlet of the compressor under high thermal load conditions for air cooled vapor compression refrigeration system. The subcooling bypass line called subcooling bypass technology(SBT) is installed to the window type A/C system to investigate the performance test. The standard air calorimeter test method is applied to measure the refrigerant temperature at the outlet of the compressor, cooling capacity, power consumption, and system EER. The refrigerant temperature at the outlet of the compressor decreases as the bypass rate increases. When the bypass rate is 8.2%, the refrigerant temperature at the outlet of the compressor decreases $2.8^{\circ}C$ while the cooling capacity and EER are the same as the conventional A/C unit.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2005년도 추계학술대회 논문집
• /
• pp.742-747
• /
• 2005

Electric railroad transformer of a supply of Operation power of DC electric cars is intense fluctuation of load and flows the only big short-circuit current as a accident of the power system. it is a peculiarity more severe than general power transformer. Consequently, researches the properties about the rectifier mold transformer of DC substation and applies with data of safety of the electric railroad transformer. This paper analyzed a failure mode, the accident occurrence scenario and the be latent dangerous unit against the rectifier mold transformer of DC railway system.