• Journal of the Semiconductor & Display Technology
• /
• v.22 no.2
• /
• pp.6-10
• /
• 2023

High-potential data can be predicted and stored in the cache to prevent cache misses, thus reducing the processor's request and wait times. As a result, the processor can work non-stop, hiding memory latency. By utilizing the temporal/spatial locality of memory access, the prefetcher introduced to improve the performance of these computers predicts the following memory address will be accessed. We propose a prefetcher that applies the GRU model, which is advantageous for handling time series data. Display the currently accessed address in binary and use it as training data to train the Gated Recurrent Unit model based on the difference (delta) between consecutive memory accesses. Finally, using a GRU model with learned memory access patterns, the proposed data prefetcher predicts the memory address to be accessed next. We have compared the model with the multi-layer perceptron, but our prefetcher showed better results than the Multi-Layer Perceptron.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2008.03a
• /
• pp.1051-1060
• /
• 2008

The use of the coal ash for surcharge material, in a view of the environmental aspect, can decrease amount of the reclamation through recycling waste materials as well as prevent a destruction of the ecosystem attributed to sand picking. In addition, it can reduce both unit cost of material and construction expenses. In this study, new construction material as alternative surcharge material using coal ash, which is by-product from thermoelectric power plant, were developed. Mixing ratios of fly ash and bottom ash derived from the coal ash in Samchunpo thermoelectric power plants were determined. Furthermore, mixing conditions depending on the ratios of the cement and gypsum used for chemical additive were determined too. Uniaxial compression strength tests were conducted at different mixing conditions and Design graph of optimum mixing ratio at each required strength for economic efficiency is indicated in this paper.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.9 no.3
• /
• pp.100-107
• /
• 2001

The main goals of the automotive suspension systems are to isolate roadway unevenness from the tire and to improve vehicle stability. To overcome the performance limitation of the passive systems the active systems which completely replace the passive spring and damper elements with a force generating actuator has been studied. However, application of the system has been limited because it has required a significant amount of power. Recently, alternative systems which retain passive elements but include active elements have been developed to reduce the power required. Those systems are mostly focused on the control system which compresses the spring-damper directly. In this study, a new type of power efficient control system which makes the spring-damper unit slide in side way is studied. After constructing the control system including dynamic modeling and motion control, two types of alternative control systems are compared in view of power consumption and dynamic attitudes such as roll responses as well as heave responses. Also, a half car bond graph model is developed to show clearly the significant differences in performances between two control systems.

• Journal of the Institute of Convergence Signal Processing
• /
• v.6 no.1
• /
• pp.39-44
• /
• 2005

Scheduling for digital system synthesis is assigning each operation in a control/data flow graph(CDFG) to a specific control step without violating precedence relation. It is one of the most important tasks due to its direct influence on the performance of the hardware synthesized. In this paper, we propose a resource-constrained scheduling algorithm. Our algorithm first analyzes the given CDFG to determine the number of functional units of each type, then assigns each operation to a control step while satisfying the constraints. It also tries to improve the solution iteratively by adjusting the number of functional units using the results collected from the previous scheduling. Experiments were performed to test the performance of the proposed algorithm, and results are presented

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.10A
• /
• pp.1604-1612
• /
• 2000

This paper proposes a simultaneous hardware resource allocation and binding algorithm for VLSI design. The proposed algorithm works on scheduled input graph and simultaneously allocates binds functional units, interconnections and registers by considering interdependency between operations and storage elements in each control step, in order to share registers and interconnections connected to functional units, as much as possible. Also, the register allocation is especially executes the allocation optima us-ing graph coloring techniques. Therefore the overall resource is reduced. This paper shows the effectiveness of the proposed algorithm by comparing experiments to determine number of functional unit in advance or to separate executing allocation and binding of existing system.

• Journal of the Korean earth science society
• /
• v.29 no.6
• /
• pp.487-494
• /
• 2008

The purpose of this study was to investigate the effects of MBL experiment instruction on the 7th graders' scientific inquiry skills and graph construction and interpretation ability in the unit "Elements and movement of sea water". Results are as follows: First, this study analyzed the influence on students' scientific inquiry skill after having six MBL instructional classes. The result showed a significant difference in the scientific inquiry skills between the experimental group and the control group, which implies that the instruction using MBL was an effective way to improve students' scientific inquiry skills. Second, this study also analyzed the influence on students' abilities to construct and interpret graphs. The result did not show any significant differences between the experimental group and the control group in the ability to construct graphs. But it showed significant differences in the ability to interpretgraphs, which means that instruction using MBL was an effective way to improve students' ability to interpret graphs.

• The KIPS Transactions:PartA
• /
• v.9A no.3
• /
• pp.351-362
• /
• 2002

Along with an asynchronous finite state machine, in short AFSM, a signal transition graph, in short STG, is one of the most widely used behavioral description languages for asynchronous controllers. Unfortunately, STGs are not user-friendly, and thus it is very unwieldy and time consuming for system designers to conceive and describe manually the behaviors of a number of asynchronous controllers which constitute an asynchronous control unit for a target system in the form of STGs. In this paper, we suggest an automatic STG derivation method through a process-oriented method. Since the suggested method considers special properties of STG-based asynchronous logic synthesis very carefully, asynchronous controllers which are synthesized from STGs derived through the suggested method are superior in aspects of area, synthesis time, performance and implementability compared to those obtained through previous methods.

• 한국태양에너지학회:학술대회논문집
• /
• 2012.03a
• /
• pp.419-424
• /
• 2012

This paper discusses the state-of-the-art techniques in real-time state estimation for the Smart Microgrids. The most popular method used in traditional power system state estimation is a Weighted Least Square(WLS) algorithm which is based on Maximum Likelihood(ML) estimation under the assumption of static system state being a set of deterministic variables. In this paper, we present a survey of dynamic state estimation techniques for Smart Microgrids based on Belief Propagation (BP) when the system state is a set of stochastic variables. The measurements are often too sparse to fulfill the system observability in the distribution network of microgrids. The BP algorithm calculates posterior distributions of the state variables for real-time sparse measurements. Smart Microgrids are modeled as a factor graph suitable for characterizing the linear correlations among the state variables. The state estimator performs the BP algorithm on the factor graph based the stochastic model. The factor graph model can integrate new models for solar and wind correlation. It provides the Smart Microgrids with a way of integrating the distributed renewable energy generation. Our study on Smart Microgrid state estimation can be extended to the estimation of unbalanced three phase distribution systems as well as the optimal placement of smart meters.

• Journal of Communications and Networks
• /
• v.13 no.6
• /
• pp.664-677
• /
• 2011

In order to control interference and improve spectrum efficiency in the femtocell and macrocell overlaid system (FMOS), we propose a joint frequency bandwidth dynamic division, clustering and power control algorithm (JFCPA) for orthogonal-frequency-division-multiple access-based downlink FMOS. The overall system bandwidth is divided into three bands, and the macro-cellular coverage is divided into two areas according to the intensity of the interference from the macro base station to the femtocells, which are dynamically determined by using the JFCPA. A cluster is taken as the unit for frequency reuse among femtocells. We map the problem of clustering to the MAX k-CUT problem with the aim of eliminating the inter-femtocell collision interference, which is solved by a graph-based heuristic algorithm. Frequency bandwidth sharing or splitting between the femtocell tier and the macrocell tier is determined by a step-migration-algorithm-based power control. Simulations conducted to demonstrate the effectiveness of our proposed algorithm showed the frequency-reuse probability of the FMOS reuse band above 97.6% and at least 70% of the frequency bandwidth available for the macrocell tier, which means that the co-tier and the cross-tier interference were effectively controlled. Thus, high spectrum efficiency was achieved. The simulation results also clarified that the planning of frequency resource allocation in FMOS should take into account both the spatial density of femtocells and the interference suffered by them. Statistical results from our simulations also provide guidelines for actual FMOS planning.

• Journal of the Korean Solar Energy Society
• /
• v.29 no.2
• /
• pp.1-7
• /
• 2009

Use of the PV(photovoltaic) generation system is increased in such areas as remote mountain places or islands at which electrical energy is not serviced. The stand alone PV system is required the power storage products such as battery, fly wheel and super capacitor. Several lead storage batteries are connected in series to get high voltages. The life of lead storage battery is shortened when over charge or over discharge takes place. So, it is needed to control batteries not to be overcharged or be discharged deeply. Voltage of each battery was ignored in former control methods in which overall voltage was used to control charge or discharge battery. In this study, the charging and discharging voltage variations of sealed lead storage batteries with l2V/l.2A were investigated step by step experiments. The results of the test show that one should consider and specify the state of each battery to prevent overcharge or deep discharge. With the basis of the experiments, we designed a monitoring unit to monitor battery voltages simultaneously using micro-controller. The unit measures voltage of 20 batteries simultaneously and displays data on the color LCD monitor with curved line graph. It also sends data to PC using the RS232C communication port. The designed unit was adapted to stand alone PV system with 1kW capacity and lead storage batteries are connected to the PV generation system. The number of lead storage batteries was 10 in series and 12V/250Ah each. Resistive load with 3kW was used for discharging.