• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2006년도 추계 학술발표회 논문집
• /
• pp.697-700
• /
• 2006

The unique technology was developed to control the hydration heat of mass concrete by adding the Phase Change Material(PCM) to concrete. The PCM was designed to liquefy at 60 degrees and its size was limited under $10{\sim}30$ micro meters to be put in pores and to have no effect on compressive strength. In the hydration heat test, center temperature of the PCM specimen was reduced by 10 degrees without any difference in the strength. Even in the adiabatic temperature rise test, the final adiabatic temperature rise amount was reduced as much as 25% in comparison with the standard value in Korean Concrete Standard Specification.

• Journal of Communications and Networks
• /
• 제9권2호
• /
• pp.141-149
• /
• 2007

Multiple-input multiple-output (MIMO) transmit pre-coding/beamforming can significantly improve system spectral efficiency. However, several obstacles prevent precoding from wide deployment in early wireless networks: The significant feedback overhead, performance degradation due to feedback delay, and the large storage requirement at the mobile devices. In this paper, we propose a precoding method that addresses these issues. In this approach, only 3 or 6 bits feedback is needed to select a precoding matrix from a codebook. There are fifteen codebooks, each corresponding to a unique combination of antenna configuration (up to 4 antennas) and codebook size. Small codebooks are prestored and large codebooks are efficiently computed from the prestored codebook, modified Hochwald method and Householder reflection. Finally, the feedback delay is compensated by channel prediction. The scheme is validated by simulations and we have observed significant gains comparing to space-time coding and antenna selection. This solution was adopted as a part of the IEEE 802.16e specification in 2005.

• Journal of information and communication convergence engineering
• /
• 제11권1호
• /
• pp.12-16
• /
• 2013

Sensor network is one of the strongest technologies for various applications including home automation, surveillance system and monitoring system. To ensure secure and robust network communication between sensor nodes, plain-text should be encrypted using encryption methods. However due to their limited computation power and storage, it is difficult to implement public key cryptography, including elliptic curve cryptography, RSA and pairing cryptography, on sensor networks. However, recent works have shown the possibility that public key cryptography could be made available in a sensor network environment by introducing the efficient multi-precision multiplication method. The previous method suggested a broad rule of multiplication to enhance performance. However, various features of sensor motes have not been considered. For optimized implementation, unique features should be handled. In this paper, we propose a fully optimized multiplication method depending on a different specification for sensor motes. The method improves performance by using more efficient instructions and general purpose registers.

• Biomolecules & Therapeutics
• /
• 제22권5호
• /
• pp.371-383
• /
• 2014

The nematode Caenorhabditis elegans (C. elegans) offers a unique opportunity for biological and basic medical researches due to its genetic tractability and well-defined developmental lineage. It also provides an exceptional model for genetic, molecular, and cellular analysis of human disease-related genes. Recently, C. elegans has been used as an ideal model for the identification and functional analysis of drugs (or small-molecules) in vivo. In this review, we describe conserved oncogenic signaling pathways (Wnt, Notch, and Ras) and their potential roles in the development of cancer stem cells. During C. elegans germline development, these signaling pathways regulate multiple cellular processes such as germline stem cell niche specification, germline stem cell maintenance, and germ cell fate specification. Therefore, the aberrant regulations of these signaling pathways can cause either loss of germline stem cells or overproliferation of a specific cell type, resulting in sterility. This sterility phenotype allows us to identify drugs that can modulate the oncogenic signaling pathways directly or indirectly through a high-throughput screening. Current in vivo or in vitro screening methods are largely focused on the specific core signaling components. However, this phenotype-based screening will identify drugs that possibly target upstream or downstream of core signaling pathways as well as exclude toxic effects. Although phenotype-based drug screening is ideal, the identification of drug targets is a major challenge. We here introduce a new technique, called Drug Affinity Responsive Target Stability (DARTS). This innovative method is able to identify the target of the identified drug. Importantly, signaling pathways and their regulators in C. elegans are highly conserved in most vertebrates, including humans. Therefore, C. elegans will provide a great opportunity to identify therapeutic drugs and their targets, as well as to understand mechanisms underlying the formation of cancer.

• 한국멀티미디어학회논문지
• /
• 제8권8호
• /
• pp.1119-1133
• /
• 2005

프로토콜 명세의 검정과 적합성시험은 프로토콜 개발 과정에서 가장 중요한 부분으로, 명세에 규정되어진 시스템 기능의 정확성을 향상시키는데 사용되는 상호 보완 기술이다. 본 논문에서는 LTS(Labeled Transition System)로 명세화된 프로토콜 모델의 안전성 및 필연성 특성을 모형검사 기법에 의해 검정하였고, 실제적으로 교착상태의 유무나 초기 상태에서 임의의 상태로 도달 가능한지에 대한 검사를 실험적으로 증명하는 도구를 구현하였다. 구현된 프로토콜 검정기는 modal mu-calculus를 사용하여 modal 논리로 표현된 특성이 명세에 대해 올바른지 아닌지를 검정할 수 있다. 또한 검정되어진 프로토콜 명세로부터 UIO(Unique Input Output) 방법에 의해 유일한 입출력열을 이용하여 이끌어낸 결과 시퀀스가 구현에 대해 올바른지를 검사하는 적합성시험 계열 생성도구를 개발하였으며, 개발된 도구는 Windows NT 환경하에서 C++ 언어를 이용하여 구현되었다.

• 대한간호학회지
• /
• 제24권3호
• /
• pp.327-344
• /
• 1994

It is needed that nursing scholars in Korea should understand the philosophy and perspectives of oriental medicine, and then explore the possiblities of theory building which can be a Korean’s unique nursing theory. With the assumption of this kind of work can be achieved by cooperation of oriental medicine and nursing areas, this study measures the subjectivity -opinions, attitudes, and values-of professional from these two areas. Identifing the schemata(structure of subjectivity) would be a basic step for the strategies and construction of oriental nursing theory. The Q-sorts of 57 professionals were combined into five distinctive factors, namely, Q-types. The five factors were named as follows : Type I, Fundamentalist, consistently insists that the understanding of oriental medicine should be a basic step for the development of oriental nursing model, because ororiental medicine's theories and practices in curing are very unique and different from the western. Type Ⅱ, Pessimist, denies the uniqueness of oriental nursing field and its independency, because of lack of scientific evidences and professionalism. Type Ⅲ, Harmonist, believes the basic concepts in two different medic관 spheres are identical, but, at the same time, accept the uniqueness of the two. They try to propose Korean Nursing Model which accomodates local culture and conventions, and the way of Nurturing Life(Yang-sang), based on the traditional western nursing. Type W. Needy Follower, merely expects the Korean Nursing Model which considers the characteristics of Koreas culture and physical constitution and, thus, is more suitable to them. Some-times, they experience the discontent and conflict when they need more qualitative and culture-oriented nursing interventions. Type V, Alternative Giver, actully clarifies the concept of Oriental Nursing, and provides specific program as a alternative of universal western nursing. Various ways of Nurturing Life (mental, life, and diet Yang-sang) were introduced as a guideline for the specification of the nursing area and its con-tent. Throughout the study, the five different Q-factors were identified, and the concept of Oriental Nursing and aspects of its theory construetion were discussed.

• 한국통신학회논문지
• /
• 제33권6A호
• /
• pp.685-692
• /
• 2008

본 논문에서는 Inmarsat (International Marine Satellite) mini-m 시스템의 하향 링크 수신기를 위한 timing recovery 루프를 제안한다. Inmarsat mini-m 시스템 규격에서 요구하는 frequency tolerance는 ${\pm}924$ Hz (signal bandwidth: 2.4 kHz) 이며, timing acquisition 시간은 하나의 UW (Unique Word) 신호 구간인 15ms 이기 때문에 주파수 옵셋에 강인하고 UW 신호 구간에서의 빠른 aquisition 이 가능한 루프 설계가 요구된다. 이에 따라 본 논문에서는 주파수 옵셋에 강인하고 빠른 aquisition 이 가능한 timing recovery 루프를 제안하였으며, 제안된 timing recovery 루프는 UW detector와 UW detector에 의해 검출된 UW 신호를 이용한 timing recovery 루프를 연동한 구조이다. UW detector는 주파수 옵셋 환경에서 안정적인 성능을 위해 차동 기반의 noncoherent detector 방식을 적용하였으며, TED (Timing Error Detector) 알고리즘은 기존의 GAD (Gardner Detector) 알고리즘 대신 본 논문에서 제안하는 UW 신호를 이용한 차동 기반의 ELD (Early Late Detector) 알고리즘 적용하였다. 제안된 방식과 기존의 GAD와의 성능 비교를 통해 제안된 방식이 만족스러운 성능과 신뢰성 있는 동작이 가능함을 입증하였다.

• 한국정보처리학회논문지
• /
• 제4권3호
• /
• pp.767-774
• /
• 1997

프로토콜 구현물들은 호환성 및 상호 연동성을 증가시키기 위해서 표준에 정희된 규격과 일치하는지를 시험 하여야 한다. 일반적으로 프로토콜 구현물들은 일련의 입력을 적용하여 이로 부터 얻은 출력들이 규격에서 기대하는 (expected)출력들과 일치하는지를 비교서 하는 적합성 시험을 부항한다. 본 논문에서는 최소 길이의 동기화된 시험 춘서를 생성하는 새로운 앙법 을 제안한다. 시험의 길이는 대칭테스트그래프(Symmetric test graph)의 간선(edge)의 갯수와 같다는 사실로부터 MUIO와 최단경로를 이용하는 기존의 방법과 FSM으로 부터 직접대칭테스를 구할 수 있다는 사실로부터 MUSS(multiple Unique State Singnture)를 이용하는 기존 의 방법들을 수정하여 동기화된 시험 순서를 생성하는 방법을 제안한다. 제안한 방법들은 MUIO를 이용하는 기존의 방법 보다 7-29%와 7-42% 개선된 시험 순서를 구할 수 있다.

• 한국실내디자인학회논문집
• /
• 제8호
• /
• pp.44-57
• /
• 1996

Now interior designers have to meet this challenge by rising to the occasion and taking advantage of opportunities while strengthening their skills which have not kept pace with the increasing emphasis on design. furthermore, they are hampered by the lack of a general working design methodology. Interior designers in Korea have been slow to recognize the need for developing a specification methodology manual which could be adapted to meet varying requirements and modified to reflect designers experiences. The design process in Korean interior design often involves utilizing drawing document methods based on architectural prototypes rather than upon drawing methods developed by design firms as a result of work experience s and unique needs. However, these unique nees are nearly always limited by traditional working drawing methods. This has led to confusion and inaccuracies due to the lack of a single starndardized and universally acceptable working drawing methodology which is capable of reflecting the needs of all parties involved , partiality those of interior designers. This thesis is an attmepted to establish the necessity for developing a better working drawing methodogoy or technical mans of satisfying the information sorting and processing need s of interior design professionals, a five step suggestion for developing such a methodology follows. First, arrange pertinent design research information by means of a process which can be employed throughout the design process, from inception through to working drawing stage. The end result should be an interior architectural design process culminating in a pattern skillfully blending architecture, vision and product with environment . The design process should be manifested into a series of definable steps and yet sufficiently flexible and variable in order to provide the most apropos design solution. Secondly , motify the design methodology systematically according to site conditions and prevailing construction technology and manifest the design process in a booklet form so that it reflects a desired pattern. Thirdly, this methodology should incorporate a stand-ardized and functional process capable of being utilized to impact clear design concepts and objectives with preci-sion and efficiency in a manual form.

• Steel and Composite Structures
• /
• 제18권6호
• /
• pp.1331-1351
• /
• 2015

Cold-formed built-up members are compression members that are common in multiple areas of steel construction, which include cold-formed steel joints and stud walls. These members are vulnerable to unique buckling behaviors; however, limited experimental research has been done in this area. Give this gap, experimental testing of 71 built-up members was conducted in this study. The variations of the test specimens include multiple lengths, intermediate welds, orientations, and thicknesses. The experimental testing was devised to observe the different buckling modes of the built-up C-channels and the effects of the geometrical properties; to check for applicability of multiple intermediate welding patterns; and to evaluate both the 2001 and 2007 editions of the American Iron and Steel Institute (AISI) Specification for built-up members in pure compression. The AISI-2001 and AISI-2007 were found to give inconsistent results that at times were un-conservative or overly conservative in terms of axial strength. It was also found that orientation of the member has an important impact on the maximum failure load on the member.