• 대한조선학회논문집
• /
• 제40권4호
• /
• pp.22-29
• /
• 2003

New high-speed depressurized circulating water channel was designed by using the CFD code. Flow in the channel has free surface and pressure in the test section can be depressed. In this study, Flow separation and bubble occurrence were considered in designing the contraction nozzle shape for better flow uniformity Tn the test section. To supplement velocity defect due to the free surface, nozzle injection system more effective in high-speed flow was installed instead of drum system. Necessary power and injection techniques were proposed. And guide vane arrangement was analyzed to reduce the flow resistance and keep quiet free surface from ´surging´. Wave absorber was devised to reduce the wave resistance and to prevent the entrainment of air to the diffuser.

• 대한기계학회논문집A
• /
• 제20권2호
• /
• pp.511-519
• /
• 1996

An investigation was conducted to study the statistical nature of tensile strength and static fracture toughness of carbon fiber reinforced plastics(CFRP) materials. A good understanding of statistical aspects of strength data is essential for the successful application of such materials because these composites unpossess material uniformity as compared with conventional metallic materials. In this paper, a statistical approach based on Weibull distribution was applied to the test data to evaluate the dispersion in the tensile strength and static fracture toughness by the change of stacking method and test temparature of the CFRP materials.

• Journal of Information Display
• /
• 제9권4호
• /
• pp.15-20
• /
• 2008

A DC-magnetron inline sputter was established, and the influence of the base pressure on the structural characteristics of the ITO thin films was studied. When the inline sputter system was established and operated for ITO sputtering, its initial vacuum level did not go below $5\times10^{-6}$ torr. The vacuum leak test was conducted by measuring t he elapsed time until the vacuum level reached $1\times10^{-6}$ torr. The base pressure was successfully maintained at $1\times10^{-6}$ torr for 900 min, and the uniformity of the ITO film that had been deposited at this pressure significantly improved.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2004년도 Proceedings of ISRS 2004
• /
• pp.471-474
• /
• 2004

Not all CCD pixels generate uniform value for the uniform radiance due to the different process of manufacture and each pixel characteristics. And the image data compression is essential in the real time image transmission because of the high line rate and the limited RF bandwidth. This pixel's nonuniformity and the loss compression make CCD pixel correction necessary in on-orbit condition. In the MSC system, the NUC unit, which is a part of MSC PMU, is charge of the correction for CCD each pixel. The correction is performed with the gain and the offset table for the each pixel and the each TDI mode. These correction tables are generated and programmed in the PMU Flash memory through the various image data tests at the ground test. Besides, they can be uploaded from ground station after onorbit calibration. This paper describes the principle of the table generation and the test way of the non-uniformity after NUC

• 한국통신학회논문지
• /
• 제25권1B호
• /
• pp.48-55
• /
• 2000

본 논문에서는 전기장 프로브 교정용 비대칭형 TEM cell의 설계과정과 제작결과에 대해 나타내었다. 2cm$\times$2cm인 시험 공간(test space)에서 전자기장의 균일도가 $\pm$2 ㏈내를 유지하면서, 제1공진 주파수는 1.5GHz 이하에서 출현하도록 하고 제2공진 주파수는 약 GHz에서 출현할 수 있도록 제작하였다. 제작 결과 계산된 결과와 실험된 데이터가 일치함을 볼 수가 있었다.

• 한국태양에너지학회 논문집
• /
• 제32권4호
• /
• pp.82-89
• /
• 2012

This study is on the thermal flow analysis to select an optimal shape of solar lamp bank. Solar Lamp bank is designed by the lamp bank design program based on point light source theory. The reliability of the program for lamp bank design is verified through irradiance variation experiments of a kind of lamp according to horizontal distance. Solar lamp bank facilitates heat distribution and satisfies the irradiance in the three wave length which test guidelines require. Among the 4 kinds of lamp bank, since lamp bank type D satisfies uniformity ${\pm}10%$ and also doesn't exceed total irradiance 1,232 $W/m^2$, type D is finally selected.

• 반도체디스플레이기술학회지
• /
• 제15권4호
• /
• pp.73-78
• /
• 2016

Contact pressure distribution between PVA brush and semiconductor wafer was measured by developing a test setup which could simulates the post CMP cleaning process. The test set-up used thin film type pressure sensor which could measure the pressure distribution of contact area with the resolution of $15.5ea/cm^2$. As the experimental results, it was verified that there had been severe contact pressure non-uniformity along the axis of the brush and between the adjacent projections on the brush's surface. These results should be considered when developing post CMP cleaning stage or designing the PVA brush.

• 대한조선학회지
• /
• 제26권3호
• /
• pp.1-8
• /
• 1989

유동의 가시화 혹은 물체주위의 유동장 측정을 위하여 적당한 크기의 소형 회로수조를 실험실에서 제작, 레이저 유속계를 사용하여 그 유동장 특성을 조사하였다. 수직형 회로수조는 유동이 굽어진 부분을 지나면서 실험측정 부분에서 평균속도분포가 균일하지 못하며, 균일한 유동장을 얻기 위해 수축부 다음에 표면 유동 가속기를 설치하였다. 적당한 표면유동가속으로 안정되고 균일한 속도분포를 얻을 수 있으며, 이 표면유동가속기의 최적점을 찾는 함수로는 단순 평균속도 뿐만 아니라 난류강도도 중요한 요소임이 실험적으로 밝혀졌다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 하계학술대회 논문집 Vol.8
• /
• pp.12-13
• /
• 2007

In this paper, we studied the analysis of environmental effects on maximum output power change of crystalline silicon photovoltaic module. During the test period, there was a 5% reduction of maximum output power on an average. And the degree of output power uniformity became better compared to initial value. Using climate data like rain, snow and dust, we tried to find the reasons for maximum power fluctuation. The surface of PV module was monitored using microscope and infrared camera to study temperature distribution. The further analysis is described in the following paper.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2011년도 제37회 추계학술대회논문집
• /
• pp.919-921
• /
• 2011

가변노즐은 다양한 고도에서 비행체의 효율을 향상시키기 위하여 사용된다. 가변노즐이 다수의 플랩으로 구성된 경우에, 플랩의 비동기화된 운동은 추력 방향에 영향을 미친다. 동기화 시험장치는 플랩을 포함하는 가변노즐 메커니즘의 동기화 특성를 검증하기 위하여 개발되었다. 본 시험장치는 노즐 공간 내부의 연소압을 모사할 수 있는 기능을 가지고 있으며, 연소압의 크기 및 분포, 각 노즐구동기의 시간 지연 등이 가변노즐 플랩의 동기화 특성에 미치는 영향을 정량화하기 위하여 사용되었다.