• 제어로봇시스템학회논문지
• /
• 제9권5호
• /
• pp.354-360
• /
• 2003

For the convenient use of high performance microprocessor in motor control, peripheral devices are needed for converting its control signals to compatible ones for motor drive. Customized devices are not plentiful far these purposes and their functions do not usually satisfied designers specification. The designers used to implement these functions on FPGA or CPLD using hardware description language. Then, in this case unessential programs are needed for control the peripherals. In this paper, a unified device model that links peripheral devices, including especially the pulse width modulation controller and the quadrature encoder interface device, to an interrupt controller is proposed. Advanced functions of peripherals could be achieved by this model and unessential programs can be simplified. Block diagrams and flowcharts are presented to illustrate the advanced functions. This unified device was designed using VHDL. The simulation results were presented to demonstrate the effectiveness of the proposed scheme.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제12권2호
• /
• pp.162-167
• /
• 2012

This paper describes the design of a high-performance unified SVM classifier circuit. The proposed circuit supports both linear and non-linear SVM classifications. In order to ensure efficient classification, a 48x96 or 64x64 sliding window with 20 window strides is used. We reduced the circuit size by sharing most of the resources required for both types of classification. We described the proposed unified SVM classifier circuit using the Verilog HDL and synthesized the gate-level circuit using 65nm standard cell library. The synthesized circuit consists of 661,261 gates, operates at the maximum operating frequency of 152 MHz and processes up to 33.8 640x480 image frames per second.

• 한국전기전자재료학회논문지
• /
• 제26권10호
• /
• pp.713-719
• /
• 2013

Power MOSFET operate voltage-driven devices, design to control the large power switching device for power supply, converter, motor control, etc. We have optimal designed planar and trench gate power MOSFET for high breakdown voltage and low on resistance. When we have designed $6,580{\mu}m{\times}5,680{\mu}m$ of chip size and 20 A current, on resistance of trench gate power MOSFET was low than planar gate power MOSFET. The on state voltage of trench gate power MOSFET was improved from 4.35 V to 3.7 V. At the same time, we have designed unified field limit ring for trench gate power MOFET. It is Junction Termination Edge type. As a result, we have obtained chip shrink effect and low on resistance because conventional field limit ring was convert to unify.

• 전기전자학회논문지
• /
• 제7권2호
• /
• pp.144-155
• /
• 2003

본 논문에서는 객체 기술과 복잡한 구조적 데이터와 관련된 데이터베이스 구조를 효율적으로 표현하기 위한 통합 데이타 모델(UDM)이라고 하는 개념 데이터 모델을 제안한다. 이 모델은 E-R 모델, 의미 객체 모델, UML 등의 데이타 모델의 주요 기능을 데이타베이스 설계 관점에서 통합한 것이다. 이 모델은 시공간 멀티미디어 데이타의 복잡한 구조를 모델링하기 위해 제안된 객체-관계 모델을 단순화시키고 일부 기능을 확장시킨 버전이다. 이 모델은 현대적인 데이터베이스 응용의 주요한 의미적, 구조적인 정보의 표현을 지원하며, 관계, 객체-관계, 객체-지향, (반-)구조 데이터베이스 등 주요 논리적 데이터베이스 모델을 지원하도록 고안되었다. 데이터베이스 설계를 위한 도구로 통합 데이타 다이아그램(UDD)을 제안하며, 이 통합 데이타 모델로부터 논리적 뷰를 유도하기 위한 방법도 제안한다. 제안된 모델은 다양한 개념적 데이터베이스 설계를 위한 편리하고 실용적인 도구로 활용될 수 있다.

• Steel and Composite Structures
• /
• 제20권3호
• /
• pp.571-597
• /
• 2016

A new unified design formula for calculating the composite compressive strength of the axially loaded circular concrete filled double steel tubular (CFDST) short and slender columns is presented in this paper. The formula is obtained from the analytic solution by using the limit equilibrium theory, the cylinder theory and the "Unified theory" under axial compression. Furthermore, the stability factor of CFDST slender columns is derived on the basis of the Perry-Robertson formula. This paper also reports the results of experiments and finite element analysis carried out on concrete filled double steel tubular columns, where the tested specimens include short and slender columns with different steel ratio and yield strength of inner tube; a new constitutive model for the concrete confined by both the outer and inner steel tube is proposed and incorporated in the finite element model developed. The comparisons among the finite element results, experimental results, and theoretical predictions show a good agreement in predicting the behavior and strength of the concrete filled steel tubular (CFST) columns with or without inner steel tubes. An important characteristic of the new formulas is that they provide a unified formulation for both the plain CFST and CFDST columns relating to the compressive strength or the stability bearing capacity and a set of design parameters.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2017년도 추계학술대회
• /
• pp.584-586
• /
• 2017

본 논문에서는 인터넷 장치의 보안을 위해 경량 대칭 암호화와 경량 인증을 통합 한 하드웨어 아키텍처를 제안한다. 암호화 핵심은 PRESENT 알고리즘과 제안된 새로운 경량 암호화 알고리즘으로 구성된다. 또한 HB 및 HB +, HB-MP, HB-MP + 인증 알고리즘들을 포함한다. 통합 보안 시스템은 Verilog HDL을 사용하여 설계되었으며 Modelsim SE 및 Xilinx Design Suite 14.3 프로그램을 사용하여 검증 및 합성되었다. 제안하는 암호화 코어 하드웨어 구조는 Spartan6 FPGA 장치에서 합성한 결과 189Mhz 주파수와 1130개 슬라이스를 가진다.

• Advances in Computational Design
• /
• 제9권1호
• /
• pp.1-23
• /
• 2024

Present paper deals with the cost effective design of reinforced concrete building frame employing unified particle swarm optimization (UPSO). A building frame with G+8 stories have been adopted to demonstrate the effectiveness of the present algorithm. Effect of seismic loads and wind load have been considered as per Indian Standard (IS) 1893 (Part-I) and IS 875 (Part-III) respectively. Analysis of the frame has been carried out in STAAD Pro software.The design loads for all the beams and columns obtained from STAAD Pro have been given as input of the optimization algorithm. Next, cost optimization of all beams and columns have been carried out in MATLAB environment using UPSO, considering the safety and serviceability criteria mentioned in IS 456. Cost of formwork, concrete and reinforcement have been considered to calculate the total cost. Reinforcement of beams and columns has been calculated with consideration for curtailment and feasibility of laying the reinforcement bars during actual construction. The numerical analysis ensures the accuracy of the developed algorithm in providing the cost optimized design of RC building frame considering safety, serviceability and constructional feasibilities. Further, Monte Carlo simulations performed on the numerical results, proved the consistency and robustness of the developed algorithm. Thus, the present algorithm is capable of giving a cost effective design of RC building frame, which can be adopted directly in construction site without making any changes.

• International Journal of Control, Automation, and Systems
• /
• 제3권2호
• /
• pp.159-165
• /
• 2005

This paper designs observers for matrix second-order linear systems on the basis of generalized eigenstructure assignment via unified parametric approach. It is shown that the problem is closely related with a type of so-called generalized matrix second-order Sylvester matrix equations. Through establishing two general parametric solutions to this type of matrix equations, two unified complete parametric methods for the proposed observer design problem are presented. Both methods give simple complete parametric expressions for the observer gain matrices. The first one mainly depends on a series of singular value decompositions, and is thus numerically simple and reliable; the second one utilizes the right factorization of the system, and allows eigenvalues of the error system to be set undetermined and sought via certain optimization procedures. A spring-mass system is utilized to show the effect of the proposed approaches.

• 한국전자거래학회지
• /
• 제7권3호
• /
• pp.139-158
• /
• 2002

Most of companies related to the area of B2B electronic commerce are making their efforts to innovate their existing business process into new designed process. XML-based electronic data interchange has potential to impact on reshaping the traditional EDI systems. This study intends to suggest a prototype of XML-based electronic data interchange using unified modeling language, with a case study applied in Korean automobile industry. In order to accomplish the research objectives, we employed UML as its standard modeling language, In this study, four diagramming techniques such as use case diagram, sequence diagram, class diagram, component diagram among eight modeling techniques are used for analyzing hierarchical business process. As a result of applying UML methodology, we design and develop XML/EDI applications efficiently. Our field test applied to Korean automobile industry shows that data modeling to design XML application using UML is better than existing methodologies in representing object schema of XML data and in extension and interoperability of systems.

• 제어로봇시스템학회논문지
• /
• 제6권2호
• /
• pp.121-126
• /
• 2000

In the fast sampling limit the delta operator model tends to the analog system model. This fundamental property of the delta operator model unifies continuous and discrete time control system. In this paper we study robust linear optimal model following servo system in the presence of disturbances and parameter perturbations. A technique to directly design the generalized differential operator based unified control system that covers both differential operator based continuous time and delta operator based discrete time case is presented. The quadratic criterion function for a linear system is used to design the robust unified servo control system The characteristics of the proposed servo system are analysed and simulated to verify the robustness.