• 대한의용생체공학회:의공학회지
• /
• 제19권5호
• /
• pp.495-502
• /
• 1998

Y.C. Fung[1]에 의한 연조직의 점탄성에 관한 수학적 모델이론 (Fung's Quasi-linear vlscoelastic theory)을 이용하여 인간의 인두조직의 점탄성(vlscoelatlcity)특성을 측정하기 위하여 반복성하중(cyclic load) ,응력완화 (tensile stress relaxation), incremental load, 그리고 일축성인장 (uniaxial tensile) 시험 등을 실시하였다. 실험적으로 측정한 인두조직의 점탄성특성이 이미 조사된 다른 조직의 점탄성특성과 정량적으로 비교되었다. 인두조직의 점탄성특성의 정량화를 위하여 Y.C.Fung의 수학적 모델이 적용되었는데 응력완화(tensile stress relaxation) 시험 측정결과로부터 도출된 표준화된 응력완화(reduced stress relaxation)함수 G(t)와 일축성인장(uniaxial tensile)시험에서 도출된 탄성반응(elastic response)함수 5(t)를 이용하여 시간에 따른 응력의 궤적을 산출하여 이를 반복성 하중(cyclic load)실험에서 측정된 결과와 비교, 분석하였다. 이러한 인두조직의 점탄성특성에 관한 연구결과는 향후 유한요소를 이용한 인두의 생체역학적 모델의 기본 데이터로 이용될 수 있다.

• Structural Engineering and Mechanics
• /
• 제90권6호
• /
• pp.543-549
• /
• 2024

The utilization of the fabric materials for lightweight building structures has attracted considerable attention due to the multiple functions and high strength-to-weight ratio. The mechanical properties of the fabric materials evolve with the loading cycle, especially for the Poisson's ratio that requires the full cyclic strain to determine the accurate values. The digital image correlation method has been justified but needs to meet the flexibility and complexity requirements of the fabric materials. This paper thus proposes a modified digital image correlation method to quantify the Poisson's ratio of fabric materials. To obtain the accurate Poisson's ratio of fabric materials in the cyclic experiments using non-contact measuring method, a speckle generation of the digital image correlation method is implemented to obtain the strain distribution and strain characteristics. The uniaxial cyclic experiments for the fabric materials are carried out in the warp, weft and 45° directions. The digital image correlation photos are taken when the material properties become stable in the cyclic loading. The results show that the strain distributions are non-uniform and dependent on the specimen directions. The reliable Poisson's ratios of the fabric materials in the warp, weft and 45° directions are 0.016, 1.2 and 2.6. The strain asymmetry at the maximum strain position is related with the weaving architecture. These observations and results are indispensable to understand the Poisson's ratios of fabric materials and to guide the proper analysis of the large-span membrane structures.

• 한국군사과학기술학회지
• /
• 제16권6호
• /
• pp.857-866
• /
• 2013

This paper is concerned with the material properties of functional high explosive(FHX) simulant at various strain rates ranging from $10^{-4}/sec$ to $10^1/sec$. Material properties of FHX at high strain rates are important in prediction of deformation modes of FHX in a warhead which undergoes dynamic loading. Inert FHX stimulant which has analogous mechanical properties with FHX was utilized for material tests due to safety issues. Uniaxial tensile tests at quasi-static strain rates ranging from $10^{-4}/sec$ to $10^{-2}/sec$ and intermediate strain rates ranging from $10^{-1}/sec$ to $10^1/sec$ were conducted with JANNAF specimen using a tensile testing machine, INTRON 5583, and developed high speed material testing machine, respectively. Uniaxial compressive tests at quasi-static strain rates and intermediate strain rates were conducted with cylindrical specimen using a dynamic materials testing machine, INSTRON 8801. And cyclic compressive loading tests were performed with various strain rates and strains. Deformation behaviors were investigated using captured images obtained from a high-speed camera.

• 지질공학
• /
• 제31권2호
• /
• pp.149-163
• /
• 2021

특성이 서로 다른 화강암, 대리암 그리고 사암에 대하여 일축압축시험과 반복재하시험을 실시하여 암석의 손상특성을 분석하였다. 일축압축시험으로 암석들의 강도, 탄성상수 그리고 손상기준응력을 결정하였고 이를 반복재하시험의 결과와 비교하였다. 반복재하시험으로 측정된 암석들의 평균 강도는 일축압축시험으로 측정된 값보다 약간 작거나 유사였다. 특히 강도가 높고 공극률이 낮은 암석들이 공극률이 매우 큰 연약한 암석들에 비해 반복하중에 의한 피로현상에 더 민감하였다. 반복 재하-제하 과정에서 발생되는 암석의 영구변형률은 암종에 따라 약간의 차이는 있으나 암석의 손상상태를 파악할 수 있는 유용한 도구로 활용할 수 있다는 것을 확인하였다. 특히 응력-누적영구변형률 곡선은 화강암과 대리암에 대하여 균열손상응력을 추정할 수 있는 가능성을 보여주었다. 시험과정에 미소파괴음을 측정하여 암석의 손상상태를 판단할 수 있는 펠리시티 비를 계산하였다. 공극이 매우 많고 연약한 사암은 미소파괴음의 방출이 매우 미약하여서 펠리시티 비의 계산에 어려움이 있었다. 반면 공극이 적고 취성의 특성을 보이는 화강암과 대리임의 경우 반복재하단계에서 계산된 펠리시티 비를 통하여 암석의 균열손상응력을 추정할 수 있는 가능성을 보여주었다. 향후 더 많은 시료와 다양한 종류의 암석을 대상으로 추가적인 시험을 진행하여 공통적인 결과를 도출한다면 유사한 조건을 갖는 암반의 손상과 변형 거동을 파악하는 데 도움이 될 수 있을 것으로 판단된다.

• 터널과지하공간
• /
• 제21권2호
• /
• pp.145-150
• /
• 2011

사암과 안산암에 대한 풍화특성을 살펴보기 위하여 동결융해 반복시험을 실시한 후, 두 암석에 대한 중량 감소율, 탄성파속도, 일축압축강도 등의 물성 변화를 측정하였다. 중량 변화의 경우 두 암석 모두에서 동결 융해 반복 횟수가 증가함에 중량이 감소하는 경향을 보였다. 특히 안산암에서는 중량 감소 경향이 시험편에 따라 매우 불규칙하게 나타났다. 탄성파속도 변화에 있어서 사암은 5%이상의 감소 경향을 보였으며, 안산암은 동결융해 반복시험 500 사이클까지 탄성파속도 변화가 거의 없다가 1000 사이클부터 5%이상의 감소 현상을 보였다. 이것은 안산암이 비교적 풍화에 강한 암석인 반면, 사암은 풍화받기 쉬운 암석인 것을 의미한다. 또한 안산암의 탄성파속도 변화 양상은 안산암의 중량 변화와 일치한다. 사암의 일축압축시험 결과에서 일축압축강도는 동결융해 반복시험 초기 사이클 구간에서 미미한 강도저하를 보이다 64 사이클부터는 불규칙한 경향을 나타냈다. 결과적으로, 중량 감소가 적은 암석 시험편일수록 강도저하율도 작게 나타났다.

• 터널과지하공간
• /
• 제13권3호
• /
• pp.215-224
• /
• 2003

자연 상태에서의 물리적 풍화를 실험적으로 재현하기 위해서 동결-응해 시험을 실시하였다. 시험 과정에서 탄성파 속도, 흡수율, 무게 및 부피 변화 등의 물리적 성질을 측정하였으며, 시험 전 및 시험 종료 후에 일축압축시험을 실시하여 강도 및 탄성 계수의 변화도 조사하였다. 시료의 무게 및 부피 변화는 풍화의 진전 정도와 명확한 상관관계를 보이지 않았으나 탄성파 속도와 일축압축강도 및 탄성계수는 풍화가 진행되면서 감소함을 보였다. 시험 결과는 암반 사면의 장기적 안정성 평가에 이용될 수 있을 것으로 기대된다.

• Advances in concrete construction
• /
• 제13권6호
• /
• pp.423-431
• /
• 2022

Although the influence of moisture content on the mechanical properties of concrete has been studied for a long time, research related to its influence on the damping and energy dissipation property of concrete structure is still very limited. In this paper, the relationship between damping property and moisture content of concrete using cyclic uniaxial compression is firstly presented, and the mechanism of the influence of moisture content on concrete damping and energy dissipation capacity is analyzed. Based on the experimental research, moisture-related damping and energy dissipation model is proposed. Results show that the dissipated energy of concrete and loss factor increase as the moisture content increasing. The energy dissipation coefficient reflecting the influence of stress level of concrete under cyclic load, decreases first and then increases as the moisture content increasing. The mechanism of moisture-related energy dissipation behavior can be divided into the reactive force of water, the development of the internal micro cracks and the pore water pressure. Finally, the proposed moisture-related damping and energy dissipation model are verified.

• 한국초전도ㆍ저온공학회논문지
• /
• 제18권3호
• /
• pp.6-9
• /
• 2016

The enhancement of mechanical properties of coated conductor (CC) tapes in practical application are usually achieved by reinforcing through lamination or electroplating metal layers on either sides of the CC tape. Mechanical or electromechanical properties of the CC tapes have been largely affected by the lamination structure under various loading modes such as tension, bending or even cyclic. In this study, the influence of brass laminate volume fraction on electromechanical properties of RCE-DR processed Gadolinium-barium-copper-oxide (GdBCO) CC tapes was investigated. The samples used were composed of single-side and both-side laminate of brass layer to the Cu-stabilized CC tape and their $I_c$ behaviors were compared to those of the Cu-stabilized CC tape without external lamination. The stress/strain dependences of $I_c$ in laminated CC tapes under uniaxial tension were analyzed and the irreversible stress/strain limits were determined. As a result, the increase of brass laminate volume fraction initially increased the irreversible strain limit and became gradual. The corresponding irreversible stress limit, however, showed no difference even though the brass laminate volume fraction increased to 3.4. But the irreversible load limit linearly increased with the brass laminate volume fraction.

• Structural Engineering and Mechanics
• /
• 제72권2호
• /
• pp.245-256
• /
• 2019

The experimentally determined mechanical behavior of the material under the prescribed service conditions is the basis of advanced engineering optimum design. To allow experimental data on the behavior of the material considered, uniaxial stress tests were made. The aforementioned tests have enabled the determination of mechanical properties of material at different temperatures, then, the material's resistance to creep at various temperatures and stress levels, and finally, insight into the uniaxial high cyclic fatigue of the material under different applied stresses for prescribed stress ratio. Based on fatigue tests, using modified staircase method, fatigue limit was determined. All these data contributes the reliability of the use of material in mechanical structures. Data representing mechanical properties are shown in the form of engineering stress-strain diagrams; creep behavior is displayed in the form of creep curves while fatigue of the material is presented in the form of S-N (maximum applied stress versus number of the cycles to failure) curve. Material under consideration was 18CrNi8 (1.5920) steel. Ultimate tensile strength and yield strength at room temperature and at temperature of $600^{\circ}C$: [${\sigma}_{m,20/600}=(613/156)MPa$; ${\sigma}_{0.2,20/600}=(458/141)MPa$], as well as endurance (fatigue) limit at room temperature and stress ratio of R = -1 : (${\sigma}_{f,20,R=-1}=285.1MPa$).

• Structural Engineering and Mechanics
• /
• 제42권2호
• /
• pp.153-174
• /
• 2012

Micromechanical facture models can be used to predict ductile fracture in steel structures. In order to calibrate the parameters in the micromechanical models for the largely used Q345 steel in China, uniaxial tensile tests, smooth notched tensile tests, cyclic notched bar tests, scanning electron microscope tests and finite element analyses were conducted in this paper. The test specimens were made from base metal, deposit metal and heat affected zone of Q345 steel to investigate crack initiation in welded steel connections. The calibrated parameters for the three different locations of Q345 steel were compared with that of the other seven varieties of structural steels. It indicates that the toughness index parameters in the stress modified critical strain (SMCS) model and the void growth model (VGM) are connected with ductility of the material but have no correlation with the yield strength, ultimate strength or the ratio of ultimate strength to yield strength. While the damage degraded parameters in the degraded significant plastic strain (DSPS) model and the cyclic void growth model (CVGM) and the characteristic length parameter are irrelevant with any properties of the material. The results of this paper can be applied to predict ductile fracture in welded steel connections.