• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2010년도 추계 학술발표회
• /
• pp.124-143
• /
• 2010

Cofferdam is a temporary levee or dam structure built by using sheet pile or earth materials to prevent water infiltration during construction work of bridge, dam, harbour dock, or hydraulic structures in the river. In this regard, it is required to secure cutoff ability for dry work and workability for rapid installation and removal of the temporary dam or levee structures. In this paper, case studies for design and construction of cofferdam were performed, and water diversion method was briefed with some examples of cofferdam type as well. For the case study details of design and construction were reviewed based on cofferdams under construction related to 16 submerged weirs of "The 4-river restoration project" and dam type cofferdam respectively. From the review, it was known that the method for changing the water flow is selected based on the data from geological and geo-hydraulic site investigation in order to mitigate environmental effects by making sure if the design cross-sectional area of flow and maximum working days are sufficiently guaranteed. Finally, the primary findings and main conclusion derived are summarized that determination of applicable type of cofferdam should be checked by case study and meet design requirements such as water inflow control, constructability.

• 한국해양공학회지
• /
• 제28권4호
• /
• pp.274-279
• /
• 2014

This paper investigates the line dynamic forces connecting tugs and a floater, where the planar motion of the floater is due to the weather criteria during the position keeping of the offshore structure by tugs. The analysis situation consists of the position keeping states for the seabed mooring line connection work of the offshore structure at the offshore site. Specifically, the decision about the tug power capacity for the position keeping is essential and depends on the weather criteria, line characteristics, length of line, etc. The planar motion of the structure is constrained by the interference of the installation vessel's operational range, behavior of the underwater fairlead, and other surrounding structures. In this paper, the tug line forces and planar motion of an offshore structure are summarized dependent on the tug line length and line material characteristics in the states fora given floater draft and weather criteria. The tug line dynamic forces and planar motion evaluated here will be used to determine the proper tug power and clearance of an offshore structure.

• 한국전자통신학회논문지
• /
• 제8권8호
• /
• pp.1213-1218
• /
• 2013

최근에는 극한 분야에서 수상로봇, 수중로봇, 공중로봇과 같은 해양로봇의 필요성이 제기되고 있음에도 불구하고, 그 기반은 매우 부족하다. 다행히도, 로봇교육에 대한 요구가 증가하고 있으므로, 해양로봇키트의 개발 및 보급을 통하여 연구개발 기반을 마련하고 미래 인재를 양성하는 것이 바람직하다. 그러나, 기존에는 공중 이동 및 장애물회피가 가능한 풍선기반의 해양로봇키트가 없다. 이 문제를 해결하기 위해서, 적외선 센서를 이용하여 장애물회피가 가능한 풍선기반 자율 공중로봇키트가 개발되었다. 시험평가 결과는 실제 적용 가능성과 추가 연구의 필요성을 보여준다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제35권1호
• /
• pp.118-125
• /
• 2011

현재 우리나라는 과학잠수가 시행되고 있지만 이에 대한 법적 근거가 없어 업무의 범위, 장비 사용, 일위대가 등의 문제로 혼란이 발생하고 있다. 본 논문에서는 이러한 혼란을 없애고 과학잠수 종사 잠수인력의 안전을 제고하기 위해 과학잠수 인증제도 도입을 제안하였다. 그리고 외국의 과학잠수 관련 법규들을 소개하였으며, 과학잠수의 업무 범위와 적용기술을 분석함으로써 과학잠수 활동에 있어서 위해 작업환경의 어려움과 고난도의 기술 필요성을 설명하였다. 끝으로 과학잠수 규정 제정 및 다이버 인증제도의 도입 필요성을 강조하고 인증제도 추진 방안을 제시하였다.

• 한국음향학회지
• /
• 제20권7호
• /
• pp.89-93
• /
• 2001

최근 광섬유 하이드로폰 시스템은 차세대의 장거리 탐지용 수동 소나 시스템의 탐지 센서로 각광을 받고 있다. 소나 시스템으로서, 광섬유 하이드로폰 시스템은 수중에 전자부가 없이 다중화 기술을 바탕으로 많은 채널의 하이드로폰을 구성할 수 있는 장점을 가지고 있다. 본 논문에서는 다채널 배열 설계, 광-전자부, 하이드로폰 설계, 해상시험을 바탕으로 한 최근의 기술 발전 추세를 기술한다. 또한, 시분할 다중화를 바탕으로 32채널 혹은 그 이상까지 확장 가능한 간섭계형 다채널 광섬유 하이드로폰 배열 시스템 개발에 관하여 기술한다. 이를 위해 12채널의 시분할 다중화 하이드로폰 배열을 제작하여 해상시험을 통해 그 성능을 평가하였다.

• 한국멀티미디어학회논문지
• /
• 제12권1호
• /
• pp.130-138
• /
• 2009

컴퓨터와 함께 많은 시간을 보내는 현대인들 중에는 바탕화면과 화면보호기로 마음의 편안함을 주는 자연풍경이나 가상수족관 등을 설정하는 사용자들이 증가하고 있다. 가상수족관은 임의의 가상 해저환경에서 자유롭게 행동하는 여러 종류의 물고기를 만들고, 동작을 분석하여, 물고기들의 애니메이션 작업을 수행함으로써 만들어진다. 본 논문에서는 유체의 형태변화를 실시간으로 표현하는 유체 애니메이션 기법과 가상물고기의 다양한 속성에 따라 상호작용을 할 수 있는 Smart Fish기술을 이용하여 활용가치가 높은 실감형 가상수족관을 구축하는 방법을 제안했다. 본 논문에서 제안하는 방법은 다양한 해저환경을 표현하는 가상수족관, 수족관 화면 보호기, 물고기 육성 게임 등에 활용되어질 수 있다.

• 대한조선학회논문집
• /
• 제55권1호
• /
• pp.75-82
• /
• 2018

Wedge-shaped fins are generally used to provide sufficient forces and moments to control and maneuver a supercavitating vehicle. There are four fins placed along the girth of the vehicle, near he tail: two of the fins are horizontal and the other two fins are vertical. In a fully developed supercavitating flow condition, a part of the fin is in a cavity pocket and the other is exposed to water. In this paper, experimental investigations of hydrodynamic characteristics of the wedge-shaped fin models are presented. Experiments were conducted at a cavitation tunnel of the Chungnam National University. We first closely observed the typical formation of wake cavitation and measured lift and drag forces acting on two different test models. Next, using a special device for generating natural and artificial supercavities, we investigated hydrodynamic forces at different cavitation number conditions. This work provides a basis for interpreting the cavity stability and hydrodynamic characteristics of the wedge-shaped control fin for a supercavitating vehicle.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2006년 창립20주년기념 정기학술대회 및 국제워크샵
• /
• pp.339-346
• /
• 2006

Increased usage of autonomous underwater vehicle (AUV) has led to the development of alternative navigational methods that do not employ the acoustic beacons and dead reckoning sensors. This paper describes a simultaneous localization and mapping (SLAM) scheme that uses range sonars mounted on a small AUV. The SLAM is one of such alternative navigation methods for measuring the environment that the vehicle is passing through and providing relative position of AUV by processing the data from sonar measurements. A technique for SLAM algorithm which uses several ranging sonars is presented. This technique utilizes an unscented Kalman filter to estimate the locations of the AUV and objects. In order for the algorithm to work efficiently, the nearest neighbor standard filter is introduced as the algorithm of data association in the SLAM for associating the stored targets the sonar returns at each time step. The proposed SLAM algorithm is tested by simulations under various conditions. The results of the simulation show that the proposed SLAM algorithm is capable of estimating the position of the AUV and the object and demonstrates that the algorithm will perform well in various environments.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 제39회 하계학술대회
• /
• pp.1338-1339
• /
• 2008

In this paper, charging part by basic from Andrew's body model research to second a danger have affect on remaining and rehabilitation humans in space under water. The construction of a circuit make to Andrew's body model. It compare that voltages measure a hand, a breast, a groin and electric currents measure an arm, a breast, a leg with safety a limit of body through an electric current. Out of result, it research that magnitude and wave of body passing an electric current give the effect to the heart control a signal and it have affect on direct the ventricle of the heart in detail motion. A thing of this sort get through to the simulation by the ATP-Draw program. The results from above, it is publish one's research work with safety a limit electric angle take measurement of resistance a body in under water and to the voltage and electric current passing each parts.

• 대한조선학회논문집
• /
• 제43권2호
• /
• pp.177-185
• /
• 2006

Cavitation is the dominant noise source of the marine vehicle. Of the various types of cavitation , tip vortex cavitation is the first appearance type of marine propeller cavitation and it generates high frequency noise. In this study, tip vortex cavitation behavior and noise are numerically investigated. A numerical scheme using Eulerian flow field computation and Lagrangian particle trace approach is applied to simulate the tip vortex cavitation on the hydrofoil. Vortex flow field is simulated by combined Moore and Saffman's vortex core radius equation and Sculley vortex model. Tip vortex cavitation behavior is analyzed by coupled Rayleigh-Plesset equation and trajectory equation. The cavitation nuclei are distributed and released in the vortex flow result. Vortex cavitation trajectories and radius variations are computed according to nuclei initial size. Noise is analyzed using time dependent cavitation bubble position and radius data. This study may lay the foundation for future work on vortex cavitation study and it will provide a basis for proper underwater propeller noise control strategies.