• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.5
• /
• pp.1061-1066
• /
• 2014

Transmission characteristics of the sound propagation is very complicate and sparse in shallow water. To increase the performance of underwater acoustic communication system, lots of channel estimation technique has been proposed. In this paper, we proposed the channel estimation based on LMS(Least Mean Square) algorithm which has faster convergence speed than conventional sparse-aware LMS algorithms. The proposed method combines $L_p$-norm LMS with soft decision process. Simulation was performed by using the sound velocity profile which acquired in real sea trial. As a result, we confirmed that the proposed method shows the improved performance and faster convergence speed than conventional methods.

• The Journal of the Acoustical Society of Korea
• /
• v.27 no.3E
• /
• pp.69-76
• /
• 2008

Measurements of bubble size and distribution in the surface layer of the sea, wind speed, and variation of ocean environments were made continually over a four-day period in an experiment conducted in the South Sea of Korea during 17-20 September 2007. Theoretical background of bubble population model indicates that bubble population is a function of the depth, range and wind speed and bubble effects on sound speed shows that sound speed varies with frequency. Observational evidence exhibited that the middle size bubble population fit the model very well, however, smaller ones can not follow the model probably due to their short lifetime. Meanwhile, there is also a hysteresis effect of void fraction. Observational evidence also indicates that strong changes in sound speed are produced by the presence of swarms of micro bubbles especially from 7 kHz to 50 kHz, and calculation results are consistent with the measured data in the high frequency band, but inconsistent in the low frequency band. Based on the measurements of the sound speed and high frequency transmission configuration in the bubble layer, we present an estimation of underwater acoustic channel capacity in the bubble layer.

• Journal of Korea Multimedia Society
• /
• v.20 no.12
• /
• pp.1940-1950
• /
• 2017

The security threat types in underwater communication networks environment are almost the same as the terrestrial, but the security of mechanisms the terrestrial RF-based networks environment can not be directly applied due to not only the limited resources of each node but also unsafe channel such as low propagation delay, high bit error rate etc. Nevertheless there has not been much research on the security of underwater acoustic communication networks. Therefore, in this paper analyzes the differences between the terrestrial communication networks and underwater acoustic communication networks, and identifies issues that are the starting points of underwater communication networks security research.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.11 no.3
• /
• pp.246-252
• /
• 2018

Recent studies have been received much attention on underwater laser communication, which is capable of high data rate. However, in underwater laser communication, distortions caused by absorption and scattering induced performance degradation. A typical way to improve performance is to apply channel coding technique. In the beginning of studies, simple methods such as RS and BCH coding techniques were applied. However, due to distance expansion and performance improvement, channel coding methods with low error probability such as LDPC coded method were applied. In this paper, we analyzed the performance according to the size of the code word N, the distance between the transceivers and the size of the M of the M-ary PPM modulation scheme. Simulation results show that parameter M of M-ary PPM is most effect on performance.

• The Journal of the Acoustical Society of Korea
• /
• v.38 no.5
• /
• pp.494-510
• /
• 2019

Underwater acoustic communication channel parameters consist of impulse response, delay spreading, scattering function, coherence bandwidth, frequency selective fading, coherence time and time variant magnitude fading statistics on which communication system modem and channel coding are designed. These parameters are influenced by sound velocity profile, platform motion and sea surface roughness in given acoustical oceanography condition. In this paper, channel model based on phasor, channel simulator, measurement and analysis method of channel parameters are given in a fixed source-to-receiver system and the parameters are analyzed using shallow water experimental data. For two different source-to-receiver ranges of 300 m and 600 m, the parameters are characterized by three multipaths such as a direct, a surface reflection path with time variant scattering and a bottom reflection path. The results present a channel modelling method of a fixed source source-to-receiver system, channel parameters measurement and analysis methods and a system design and performance assessment method in shallow water.

• Journal of Navigation and Port Research
• /
• v.34 no.3
• /
• pp.181-187
• /
• 2010

The performance of underwater wireless communication system is influenced on channel characteristic. Especially, a delay spread cause by reverberation and multi-path happen the ISI (Inter Symbol Interference) and reduces the communication performance. In this paper, we study the application of high speed data transmission in underwater to use the OFDM (Orthogonal Frequency Division Multiplexing) technique for robust the reverberation and multi-path. we confirm the performance of communication in underwater to use the model for actually underwater channel simulation model. As a result, we acquired the BER of modulation techniques. The BER of single carrier is $2{\times}10^{-1}$ and BER of multi carrier is $8{\times}10^{-2}$ in 1000m.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.10 no.5
• /
• pp.645-652
• /
• 2015

In underwater, such as fish farm and sea, turbidity is increased by water droplets and various suspended, therefore light attenuation occurs depending on the depth also caused by the scattering effect of light float. In this paper, in order to improve the visibility of underwater images obtained from these aquatic environment, we propose a visibility enhancement method using a haze removal method based on dark channel prior and a trained color transform model. In order to train a color transform model, we used underwater pattern images captured from Pohang and Yeosu, and to measure the performance of the proposed method, we carried out experiment of visibility enhancement using underwater images collected from Yeosu, Geomundo and Philippines. The results show that the proposed method can improve the visibility of underwater images of various locations.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.48 no.1
• /
• pp.32-37
• /
• 2011

Underwater communication is affected by reverberation and noise characteristics of the underwater channel and time delay takes place by multipath. Hence, Signal is distorted and a lot of error is generated in the transmitting/receiving by multipath effects, so a channel coding for error correction is required. We propose a channel coding algorithm which is possible to correct error of received signal. We compare and analyze BER(bit error rate) performance depending on the depth of each transmitter-receiver using channel coding algorithm. QPSK was used as a modulation method, and 1/2 code rate convolution coding was used as a coding rate. A convolution coding method shows increase of BER performances.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38C no.3
• /
• pp.303-310
• /
• 2013

Underwater acoustic communication has multipath error because of reflection by sea-level and sea-bottom. The multipath of underwater channel causes signal distortion and error floor. In order to improve the performance, it is necessary to employ an iterative coding scheme. Among the iterative coding scheme, turbo codes and LDPC codes are dominant channel coding schemes in recent. This paper concluded that turbo coding scheme is optimal for underwater communications system in aspect to performance, coded word length, and equalizer combining. Also, we confirmed the performance in the environment of oceanic experimentation using turbo equalizer based on distance 5Km, data rate 1Kbps.

• Journal of the Institute of Convergence Signal Processing
• /
• v.20 no.4
• /
• pp.177-185
• /
• 2019

In this paper, we propose and evaluate a FDE combined with STBC transmission structure to cancellation of ISI in underwater acoustic communication. To achieve this purpose, underwater acoustic channels are modeled and the simulation results are presented. In case of STBC-FDE, the transmission rate is less about 4% than STBC-OFDM, but the SER performance is better than STBC-OFDM that is larger from 4.4% to 16.8% at the SNR of 15dB than STBC-OFDM.