• 한국과학교육학회지
• /
• 제32권3호
• /
• pp.415-427
• /
• 2012

In this study, we conducted preliminary survey, diagnostic test and in-depth interview in order to study Korean pre-service chemistry teachers' understanding on entropy and investigate how Korean pre-service chemistry teachers deal with the natural phenomenon which is related to entropy conceptions. Firstly, as a result of the preliminary survey, it was found that pre-service chemistry teachers strongly recognized entropy as the degree of disorder. Secondly, the diagnostic test showed pre-service chemistry teachers were mostly confused about whether the entropy of the universe increases during a spontaneous change, and they had a tendency to interpret the natural phenomenon related to entropy change as the change of disorder. Finally, during in-depth interview, after we explained entropy change in all diagnostic test questions with the concept of microstate, pre-service chemistry teachers revealed a better understanding about entropy. Through this research, pre-service chemistry teachers had an opportunity to reflect on their deficiencies of entropy conceptions, which will ultimately help students to approach the concept of entropy more correctly.

• 한국환경과학회지
• /
• 제22권11호
• /
• pp.1473-1479
• /
• 2013

Entropy is a measure of disorder or uncertainty. This terminology is qualitatively used in the understanding of its correlation to pollution in the environmental area. In this research, three different entropies were defined and characterized in order to quantify the qualitative entropy previously used in the environmental science. We are dealing with newly defined distinct entropies $E_1$, $E_2$, and $E_3$ originated from Shannon entropy in the information theory, reflecting concentration of three major green house gases $CO_2$, $N_2O$ and $CH_4$ represented as the probability variables. First, $E_1$ is to evaluate the total amount of entropy from concentration difference of each green house gas with respect to three periods, due to industrial revolution, post-industrial revolution, and information revolution, respectively. Next, $E_2$ is to evaluate the entropy reflecting the increasing of the logarithm base along with the accumulated time unit. Lastly, $E_3$ is to evaluate the entropy with a fixed logarithm base by 2 depending on the time. Analytical results are as follows. $E_1$ shows the degree of prediction reliability with respect to variation of green house gases. As $E_1$ increased, the concentration variation becomes stabilized, so that it follows from linear correlation. $E_2$ is a valid indicator for the mutual comparison of those green house gases. Although $E_3$ locally varies within specific periods, it eventually follows a logarithmic curve like a similar pattern observed in thermodynamic entropy.

• Korean Chemical Engineering Research
• /
• 제61권1호
• /
• pp.116-122
• /
• 2023

열역학 계를 구성하는 분자들의 특성, 거시적 규정의 성분, 상의 종류가 엔트로피에 미치는 관련성을 고찰하였다. 같은 성분에 속하는 분자들의 불구별성에 대하여 고전역학과 양자역학의 관점의 차이를 이해하고, 분자의 특성이 거시적 분류의 기준인 '성분'과 부합하는가를 검토하였다. 계의 열역학적 미시 상태에 관한 정의를 명확히 함으로써 분자의 구별성에 기인하는 볼츠만 통계학의 결함을 제거하고, 그 결과로 엔트로피에 대한 깁스 역설이 해소된다. 유체 및 고체의 상 변화에서 분자의 불구별성, 대칭수, 그리고 실현되는 미시 상태들의 수의 변화가 분배 함수와 엔트로피에 미치는 영향을 고찰하였다. 특히, 결정성 고체는 에르고딕 가설을 따르지 않는 열역학 계로 다룰 수 있음을 보인다.

• 대한화학회지
• /
• 제52권2호
• /
• pp.186-196
• /
• 2008

연구에서는 고체와 기체의 용해에 대한 대학생들의 열역학적인 이해 정도를 조사하였다. 연구 대상은 서울 지역 대학교 3학년 학생 34명이며, 용해 개념 검사지를 사용하였다. 검사지는 고체 염화나트륨과 기체 이산화탄소가 물에 용해될 때 각각의 엔탈피 변화, 엔트로피 변화, 온도에 따른 용해도 변화를 물어보는 6개의 문항으로 구성하였다. 검사지 응답을 분석한 결과 용해시 엔탈피 변화에 대한 학생들의 이해 정도는 높지 않았으며 많은 학생들이 고체 용해에 대해 용질-용매간 인력이 용질-용질간 인력보다 커야 용해가 일어난다고 생각하여 발열 과정으로 응답하였고, 또 용해가 자발적으로 일어나기 위해서는 엔탈피가 감소해야 한다고 생각하여 변화의 자발성이 엔탈피 변화에만 의존하는 것으로 생각하고 있었다. 용해시 엔트로피 변화에 대해서는 엔탈피 변화보다는 이해 정도가 높았으며 대부분 무질서도의 개념으로 이를 설명하였다. 온도에 따른 용해도 변화에 대해서는 대부분 그 방향에 대해서는 옳은 응답을 하였으나 이를 엔탈피 변화와 관련지어 설명한 학생은 25%정도밖에 되지 않았는데, 용해시 엔탈피 변화의 부호를 잘못 인식한 학생들은 올바른 설명을 할 수 없었기 때문이다.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2018년도 춘계학술대회 논문집
• /
• pp.129-129
• /
• 2018

Hard coating application is effective way of cutting tool for hard-to-machine materials such as Inconel, Ti and composite materials focused on high-tech industries which are widely employed in aerospace, automobile and the medical device industry also Information Technology. In cutting tool for hard-to-machine materials, high hardness is one of necessary condition along with high temperature stability and wear resistance. In recent years, high-entropy alloys (HEAs) which consist of five or more principal elements having an equi-atomic percentage were reported by Yeh. The main features of novel HEAs reveal thermodynamically stable, high strength, corrosion resistance and wear resistance by four characteristic features called high entropy, sluggish diffusion, several-lattice distortion and cocktail effect. It can be possible to significantly extend the field of application such as cutting tool for difficult-to-machine materials in extreme conditions. Base on this understanding, surface coatings using HEAs more recently have been developed with considerable interest due to their useful properties such as high hardness and phase transformation stability of high temperature. In present study, the nanocomposite coating layers with high hardness on WC substrate are investigated using high entropy alloy target made a powder metallurgy. Among the many surface coating methods, reactive magnetron sputtering is considered to be a proper process because of homogeneity of microstructure, improvement of productivity and simplicity of independent control for several critical deposition parameters. The N2 is applied to reactive gas to make nitride system with transition metals which is much harder than only alloy systems. The acceleration voltage from 100W to 300W is controlled by direct current power with various deposition times. The coating layers are systemically investigated by structural identification (XRD), evaluation of microstructure (FE-SEM, TEM) and mechanical properties (Nano-indenter).

• 보건행정학회지
• /
• 제16권4호
• /
• pp.86-111
• /
• 2006

Either ways of understanding health care as a commodity or public work are at opposite ends of health care spectrum. These two rival conceptions reflected by viewpoint(ideology) would lead to different directions in policy-making for health care reform. The purpose of this study is to access the value differences of experts' policy views about health care issues by analyzing the extent of consensus among experts in the field of health care. Using primary data obtained through a mail survey of 558 experts in the field of health care, we analyzed the differences of experts' opinions about characteristics of health care market, policy issues and values Gdeology). The study represents from 50-50 split analysis, entropy index, and factor analysis that the wide spread disagreements over health policy, which is a major barriers to effective policy-making, could be caused by the ideological perception differences among experts. This implies that, if values play an important role in policy-making, we should identify the differences in value and seek ways to balance among the diverse values such as efficiency, equity, freedom, and security. For this, the policy issues debated on differences in values should be reconciled for narrowing gaps of experts' perceptions through various ways.

• 한국정보처리학회논문지
• /
• 제6권9호
• /
• pp.2558-2562
• /
• 1999

본 논문에서는 정규화 및 엔트로피의 최소화에 의해 영상의 애매성을 제거한 후, 톨이론을 적용하여 영상구조의 파악을 통하여 잡음 제거 및 경계선을 추출하는 방법에 대해 제안하고자 한다. 기존의 방법은 두 개의 영역이 유사한 명암도 분포값을 가지면서 접촉되어 있거나 명암도 값의 분포가 완만한 경우 경계선을 추출하지 못하는 문제가 존재하였다. 이는 후의 특징 추출 등과 같은 처리 과정에 영향을 미쳐 오인식과 직결되는 문제점을 야기한다. 본 논문에서는 이 같은 문제점을 해결하기 위한 방법론을 제안하고자 하며, 실험에 의해 본 논문의 유용성을 입증하고자 한다.

• Geomechanics and Engineering
• /
• 제19권3호
• /
• pp.283-293
• /
• 2019

Evaluating the stability of the excavation face of the cross-river shield tunnel with good accuracy is considered as a nonlinear and multivariable complex issue. Understanding the stability evaluation method of the shield tunnel excavation face is vital to operate and control the shield machine during shield tunneling. Considering the instability mechanism of the excavation face of the cross-river shield and the characteristics of this engineering, seven evaluation indexes of the stability of the excavation face were selected, i.e., the over-span ratio, buried depth of the tunnel, groundwater condition, soil permeability, internal friction angle, soil cohesion and advancing speed. The weight of each evaluation index was obtained by using the analytic hierarchy process and the entropy weight method. The evaluation model of the cross-river shield construction excavation face stability is established based on the idea point method. The feasibility of the evaluation model was verified by the engineering application in a cross-river shield tunnel project in China. Results obtained via the evaluation model are in good agreement with the actual construction situation. The proposed evaluation method is demonstrated as a promising and innovative method for the stability evaluation and safety construction of the cross-river shield tunnel engineerings.

• 한국광물학회지
• /
• 제23권4호
• /
• pp.367-375
• /
• 2010

지구물질로 이루어진 공극 구조와 이를 채우고 있는 유체의 상호작용에 대한 이해는 지표 및 지구내부의 다양한 지질학적 현상의 설명에 필수적이다. 본 연구에서는 지구물질과 유체의 상호작용을 보다 잘 이해하기 위해, 비표면적과 공극률이 다공성 매질의 공극 구조를 설명하는 매개변수에 미치는 영향을 살펴보고자 하였다. 이를 위해 입자의 지름과 공극률을 다양하게 하여 동일한 크기의 구형의 입자로 이루어진 다공성 매질에 대한 삼차원 공극 구조를 무작위 패킹 시뮬레이션으로 얻었고, 이에 대해 구성 엔트로피와 삼차원 상자집계 프랙탈 차원 분석을 하였다 구성 엔트로피 분석 결과, 엔트로피 길이는 비표면적이 2.4에서 $8.3mm^2/mm^3$으로 증가할 때 0.8에서 0.2 mm로 감소하고, 최대 구성 엔트로피는 공극률이 0.33 에서 0.46으로 증가할수록 0.94에서 0.99로 증가하는 뚜렷한 경향을 보인다. 구성 엔트로피와 공극률의 관계로부터 구성 엔트로피가 맨틀 용융체의 탄성과 점성도를 설명하는 변수로 사용될 수 있음을 제시한다. 삼차원 상자집계 프랙탈 차원은 비표면적이 같을 때 공극률이 증가함에 따라 증가하고, 비표면적이 2.4에서 $8.3mm^2/mm^3$으로 증가할 때 2.65에서 2.98로 증가한다. 이러한 삼차원 상자집계 프랙탈 차원과 비표면적, 공극률의 관계로부터 삼차원 상자집계 프랙탈 차원이 지진파 감쇠와 맨틀용융체를 포함한 다양한 지질매체의 구조와 무질서도를 설명하는 변수로 사용될 수 있음을 제시한다.

• 한국가시화정보학회:학술대회논문집
• /
• 한국가시화정보학회 2004년도 춘계학술대회 논문집
• /
• pp.1-7
• /
• 2004

When a vortex diffracts upon encountering a vortex, many strong and weak waves are produced in the course of interaction. They are the cause of shock wave attenuation and noise production. This phenomenon is fundamental to understanding the more complex supersonic turbulent Jet noise. In this paper we have reviewed the research on shock-vortex interaction we have carried on last seven years. We have computationally investigated the parameter effect. When a shock is strong, shock diffraction pattern becomes complex since the slip lines from the triple points on Mach stem curl into the vortex, causing an entropy layer. When the vortex is unstable, vortexlets are brought about each of which make shock diffraction of a reduced intensity. Strong vortex produces quadrupole noise as it impinges into a vortex. Elementary interaction models such as shock splitting, shock reflection, and shock penetration are presented based on shock tube experiment. These models are also verified by computational approach. They easily explain production and propagation of the aforementioned quadrupole noise, Diverging acoustics are explained in terms of shock-vortexlet interactions for which a computational model Is constructed.