• Journal of Construction Engineering and Project Management
• /
• v.4 no.1
• /
• pp.29-36
• /
• 2014

Tunnelling has become a preferred method of construction for road and highway projects in countries with a lot of hilly slope geological conditions such as found in Malaysia. However the construction works of a tunnelling project are usually complicated and costly, which consequently impose great risks to the parties involved. This paper identifies the key significant risks and sub-risks for tunnelling construction projects in Malaysia through a case study. Interview has been used as the solitary means to determine the significant risks from contractor's eleven key project personnel who were directly involved in the tunnelling construction such as consultant, construction manager and tunnel engineers. The importance of the risks identified is then prioritised and ranked via the Analytic Hierarchy Process (AHP)'s pairwise comparison approach to determine their criticality towards a successful delivery of project. As a result, three key risks have been identified as significant for the tunnelling case study project, namely health and safety, cost overrun in construction and time overrun in construction. Two sub-risks each of the latter categories, which are cost underestimation and unforeseen events (cost overrun in construction) as well as plant and machinery failure and delay in material delivery (time overrun in construction), have occupied the top five overall risk ranking.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.32 no.3
• /
• pp.102-110
• /
• 2004

A design code validated against the thermal analysis results of CFD and published RTE code for a regeneratively cooled combustion chamber has been developed. The major function of the code is to predict the regenerative cooling performance and stress of the chamber wall. Adopted are the empirical correlation for the evaluation of the heat transfer coefficient of hot gas and coolant, and theoretical formula for the fin effect of the channel rib. The hot-gas-side wall temperature from the present code shows 100 K difference at most compared to RTE results. It shows less than 10 % difference for the heat flux thrall through the chamber wall and hot-gas-side convective heat transfer coefficient. The major cause of the wall temperature difference is due to the underestimation of the fin effect of the channel rib.

• ETRI Journal
• /
• v.30 no.2
• /
• pp.194-204
• /
• 2008

The online collection of coarse-grained traffic information, such as the total number of flows, is gaining in importance due to a wide range of applications, such as congestion control and network security. In this paper, we focus on an active queue management scheme called SRED since it estimates the number of active flows and uses the quantity to indicate the level of congestion. However, SRED has several limitations, such as instability in estimating the number of active flows and underestimation of active flows in the presence of non-responsive traffic. We present a Markov model to examine the capability of SRED in estimating the number of flows. We show how the SRED cache hit rate can be used to quantify the number of active flows. We then propose a modified SRED scheme, called hash-based two-level caching (HaTCh), which uses hashing and a two-level caching mechanism to accurately estimate the number of active flows under various workloads. Simulation results indicate that the proposed scheme provides a more accurate estimation of the number of active flows than SRED, stabilizes the estimation with respect to workload fluctuations, and prevents performance degradation by efficiently isolating non-responsive flows.

• Atmosphere
• /
• v.25 no.2
• /
• pp.205-219
• /
• 2015

In this study, the simulation results of temperature by regional climate model (Reg- CM4) over South Korea were corrected by Hempel et al. (2013)'s method (Hempel method), and evaluated with the observation data of 50 stations from Korea Meteorological Administration. Among the 30 years (1981~2010) of simulation data, 20 years (1981~2000) of simulation data were used as a training data, and the remnant 10 years (2001~2010) data were used for the evaluation of correction. In general, the Hempel method and parametric quantile mapping show a reasonable correction both in mean and extreme climate of temperature. As the results, the systematic underestimation of mean temperature was greatly reduced after bias correction by Hempel method. And the overestimation of extreme climate, such as the number of TN5% and freezing day, was significantly recovered. In addition to that, the Hempel method better preserved the temporal trend of simulated temperature than other bias correction methods, such as the quantile mapping. However, the overcorrection of the extreme climate related to the upper quantile, such as TX5% and hot days, resulted in the exaggeration of the simulation errors. In general, the Hempel method can reduce the systematic biases embedded in the simulation results preserving the temporal trend but it tends to overcorrect the non-linear biases, in particular, extreme climate related to the upper percentile.

• Atmosphere
• /
• v.29 no.4
• /
• pp.463-480
• /
• 2019

This study classified heavy rain types from K-means clustering for the hourly relationship between rainfall intensity and cloud top height over the Korean peninsula, and then examined their statistical characteristics for the period of June~August 2013~2018. Total rainfall amount of warm-type events was 2.65 times larger than that of the cold-type, whereas the lightning frequency divided by total rainfall for the warm-type was only 46% of the cold-type. Typical cold-type cases exhibited high cloud top height around 16 km, large reflectivity in the upper layer, and frequent lightning flashes under convectively unstable condition. Phenomenally, the cold-type cases corresponded to cloud cluster or multi-cell thunderstorms. However, two warm-type cases related to Changma and typhoon were characterized by heavy rainfall due to long duration, relatively low cloud top height and upper-level reflectivity, and the absence of lightning under the convectively neutral and extremely humid conditions. This study further confirmed that the forecast skill of rainfall could be improved by applying correction factor with the overestimation for cold-type and underestimation for warm-type cases in the Local Data Assimilation and Prediction System (LDAPS) operational model (e.g., BIAS score was improved by 5%).

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.21 no.11
• /
• pp.1965-1971
• /
• 1997

The relaxation of stress concentration in notched members can be very significant in the improvement of notched strength and fatigue life. This paper investigated the relationship of stress concentration factor, and notched strength and fatigue life. The stress concentration factors were analyzed by FEM. Uniaxial tensile and fatigue tests were carried on plain woven composite specimens which have a main hole and two defence holes. From experimental results, the notched strength and the fatigue limit increased up to about 50% and 30% respectively due to the reduction in stress concentration. The fatigue lives predicted by Juvinall's approach were underestimated than test results and this trends were remarkable as nothed strength increased. This is because of the underestimation of a coefficient. A in S-N curve (.sigma.$_{ar}$ =A $N_{f}$ $^{B}$). Therefore, considering notched strength the coefficient A was modified. The fatigue lives by this process were agreed well with the experimental results.sults.

• Computers and Concrete
• /
• v.12 no.6
• /
• pp.739-754
• /
• 2013

Creep and shrinkage have pronounced effects on the long-term deflection of prestressed concrete members. Under repeated loading, the rate of creep in prestressed concrete members is often accelerated. In this paper, an iterative computational procedure based on the well known Model B3 for creep and shrinkage was developed to predict the time-dependent deflection of partially prestressed concrete members. The developed model was validated using the experimental observed deflection behavior of a simply supported partially prestressed concrete beam under repeated loading. The validated model was then employed to make predictions of the long-term deflection of the prestressed beams under a variety of conditions (e.g., water cement ratio, relatively humidity and time at drying). The simulation results demonstrate that ignoring creep and shrinkage could lead to significant underestimation of the long-term deflection of a prestressed concrete member. The model will prove useful in reducing the long-term deflection of the prestressed concrete members via the optimal selection of a concrete mix and prestressing forces.

• Structural Engineering and Mechanics
• /
• v.68 no.2
• /
• pp.159-170
• /
• 2018

This paper aims to develop response modification factors for stiffness degrading structures by incorporating soil-structure interaction effects. A comprehensive parametric study is conducted to investigate the effects of key SSI parameters, natural period of vibration, ductility demand and hysteretic behavior on the response modification factor of soil-structure systems. The nonlinear dynamic response of 6300 soil-structure systems are studied under two ensembles of accelograms including 20 recorded and 7 synthetic ground motions. It is concluded that neglecting the stiffness degradation of structures can results in up to 22% underestimation of inelastic strength demands in soil-structure systems, leading to an unexpected high level of ductility demand in the structures located on soft soil. Nonlinear regression analyses are then performed to derive a simplified expression for estimating ductility-dependent response modification factors for stiffness degrading soil-structure systems. The adequacy of the proposed expression is investigated through sensitivity analyses on nonlinear soil-structure systems under seven synthetic spectrum compatible earthquake ground motions. A good agreement is observed between the results of the predicted and the target ductility demands, demonstrating the adequacy of the expression proposed in this study to estimate the inelastic demands of SSI systems with stiffness degrading structures. It is observed that the maximum differences between the target and average target ductility demands was 15%, which is considered acceptable for practical design purposes.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.6 no.4
• /
• pp.574-581
• /
• 2002

Traditional queueing analyses are very useful for designing a network's capacity and predicting their performances, however most of the predicted results from the queueing analyses are quite different from the realistic measured performance. And recent empirical studies on LAN, WAN, and VBR traffic characteristic have indicated that the models used in the traditional Poisson assumption cannot properly predict the real traffic properties due to underestimation of the long-range dependence of network traffics and self-similar properties. In this paper, It is also shown that the self-similar traffic reflects real Ethernet traffic characteristics by comparing Pareto-like ON/OFF source model which is exactly self-similar model to the traditional Poisson model. It is also performed optimization design and performance analysis of ATM network using Internet traffic characteristics.

• YAKHAK HOEJI
• /
• v.46 no.1
• /
• pp.30-38
• /
• 2002

The elderly patients are the most frequent users of digoxin because of increased prevalence of the two primary indications for digoxin therapy, fibrillation (AE) and congestive heart failure (CHF). This study performed to observe a variation in digoxin pharamcokinetic parameters in advancing age and changing kidney function and to compare the measured clearance with the calculated clearance. The 123 drug monitoring records of inpatients who had achieved steady state concentration of digoxin at a tertiary hospital from April 1999 to October 2001 were reviewed. In advancing age, measured digoxin clearance, volume of distribution and creatinine clearance were reduced. Compared with the calculated digoxin clearance, the measured digoxin clearance was more reduced in patients without CHF Especially, in elderly patients without CHF the measured digoxin clearance was lower than the calculated digoxin clearance. In contrast to nonCHF patients the measured value was greater than the calculated value in all CHF patients. Findings from this study indicate that the calculated digoxin clearance in elderly patients without CHF substantially overestimated the true clearance. Thus, it appears that the use of calculated digoxin clearance to estimate serum digoxin concentration may result in underestimation of the true serum concentration in a number of elderly patients without CHF.