• 암석학회지
• /
• 제13권2호
• /
• pp.103-118
• /
• 2004

청송 지역에서는 국내외적으로 희귀하며 매우 다양하고 아름다운 형태를 보여주는 구과상 유문암들이 맥의 형태로 산출된다. 청송 구과상 유문암내에 나타나는 섬유상 광물은 이들 암맥이 지표근처에서 빠르게 냉각되었음을 지시하며 청송 구과강 유문암의 다양한 형태는 각 맥의 냉각속도의 다양함에 기인한다. 구과상 유문암의 형태는 성인에 따라 방사상 단식,층상 단식, 층상 복식, 방사상-층상 복식, 방사층상 복식의 5가지로 분류된다. 방사상 단식 구과형과 방사층상 복식 구과형은 상대적으로 가장 빠른 냉각시 과냉각에 의한 확산류에 의해 형성되었으며 냉각속도가 상대적으로 가장 느린 경우 리제강 링의 형성 원리와 같은 방식으로 상대적으로 느린 확산에 의해 층상형 복식 구과형이 형성되었다. 그리고 냉각속도가 중간일 경우 층상 단식 구과형이 생성된다. 따라서 청송 지역의 구과상 유문암중 방사상 단식 혹은 방사층상 복식 구과형인 국화형, 민들레형, 해바라기형, 다알리아형은 가장 빠르게 냉각된 암맥에서 생성된 반면 층상형 복식 구과형인 장미형, 무명형과 목단형등은 상대적으로 가장 천천히 냉각된 암맥으로 부터 형성되었다. 그리고 매화형과 같은 층상단식 구과형은 상대적으로 중간 속도의 냉각 속도를 갖는 맥에서 산출된다. 구과상 유문암 맥들의 K-Ar 전암 연령은 이들 암석이 48-50Ma에 관입한 암체임을 지시한다 청송지역의 구과상 유문암은 그 희귀성과 다양하며 아름다운 형태 때문에 연구 및 보존가치가 높다.

• Nuclear Engineering and Technology
• /
• 제32권1호
• /
• pp.1-9
• /
• 2000

Delayed hydride cracking (DHC) velocity and threshold stress intensity factor for DHC ($K_{IH}$) tests in the radial direction on M11 pressure tube material in Wolsong unit 1 were carried out following the Atomic Energy Canada Limited (AECL) standard test procedure in order to identify the effect of undercooling on DHCV and to acquire the $K_{IH}$ data. The results showed that $K_{IH}$ 's were 8.8$\pm$0.8 MPa√m in the back offcut and 11.4$\pm$0.7 MPa√m in the front offcut. The fact that $K_{IH}$ in the front offcut is about 20% higher than that in the back offcut is attributed to the microstructural difference between the materials of the front and back ends. $K_{IH}$ 's in M11 pressure tube appeared to be higher than the values from the tubes made of double melted ingot reported earlier. This can be interpreted by the fact that very small amounts of Chlorine (Cl) and Phosphorus (P) are contained in the ingot and that the content of the harmful elements in the M11 pressure tube is equivalent to that made of a quadruple melting process. DHC velocities at 25$0^{\circ}C$ in the front offcut in the radial direction are measured to be 5~8$\times$10$^{-8}$ m/s. The results show that the prior thermal history change the DHC velocity significantly. This effect was confirmed by the experiment of undercooling prior to the DHC tests.DHC tests.

• 대한금속재료학회지
• /
• 제49권1호
• /
• pp.58-63
• /
• 2011

The grain size and growth direction of a directionally solidified turbine blade were evaluated by the initial nucleation condition at the start block of directional solidification. The initial nucleation condition was controlled by inserting a Ni foil on the directional solidification plate of the directional solidification furnace. Fine grains with good orientation were obtained in the faster cooling condition at the start block. The nucleus number was compared with the cooling rate of the start block by electron back scattered diffraction (EBSD). DSC (differential scanning calorimeter) analysis was performed to compare the melting point and undercooling for nucleation of the coarse nuclei and fine nuclei of the start block. The faster cooling condition at the start block showed more undercooling for nucleation and smaller size of nuclei which resulted in a fine grain with good orientation in the directional turbine blade.

• 한국주조공학회지
• /
• 제15권2호
• /
• pp.164-174
• /
• 1995

New metallic powder making processes, named "Centrifugal Emulsification Process(CEP)" and "Mixer and Settler(MS)" have been developed to synthesize rapid solidified metallic powders. Through CEP and MS processings, the high temperature metals as well as the low temperature alloys are manufactured. Also, the effects of rapid solidification on the undercooling, solidification rate and crystallization behaviors can be evaluated effectively through the processes. The standard deviations of the synthesized typical Pb-Sn eutectic powders are 1.63 and 1.51 for CEP and MS respectively, and the average size of the MS powders was $18{\mu}m$. The possibility of the customized not only size and shape control but microstructure control was also shown. Both of the new methods can be applied to continuous powder making processes.

• 마이크로전자및패키징학회지
• /
• 제18권3호
• /
• pp.9-17
• /
• 2011

Nano-composite solders have been studied to improve the properties of Pb-free solder joints. The nanoparticles in the composite solders were carbon nanotubes(CNTs), metals (Ag, Ni, Cr, etc.), ceramics (SiC, $ZrO_2$, $TiB_2$, etc.). To fabricate the nano-composite solders, mechanical mixing methods and in-situ fabrication method has been used for well-dispersed nano phase. The characteristic properties of the nano-composite solders were high creep resistance, low undercooling, low IMC growth rate and fine microstructures. More researches on the nano-composite solders are required to improve the processibility and the reliability of the nano-composite solder joints.

• 한국세라믹학회지
• /
• 제22권2호
• /
• pp.44-50
• /
• 1985

The crystallization behavior of $K_2O-SiO_2$ glasses with added $TiO_2$ and the effect of $TiO_2$ on internal nuleation at temperature in the range of 875 to 121$0^{\circ}C$ have been investigated by means of X-ray diffractometry optical microscopy and scanning electron microscopy. The crystalline phase of these glasses identified by X-ray diffractometry is cristbalite. The scanning electron microspcopy reveals a two-phase layer of dendritic crystals and intersitial melt which grow from the surface at a constant rate, The observed crystallization rates are consistent with a diffusion-controlled mechanism. An equation relating viscosity and undercooling to growth rate is presented.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2009년도 춘계학술대회 논문집
• /
• pp.716-719
• /
• 2009

HFC-134a 의 농도별(99.9%, 80%, 50%, $N_2$ balance)로 하이드레이트의 결정생성/해리 특성을 연구하였다. HFC-134a 하이드레이트는 기/액 경계면에서만 수지상 형태의 하이드레이트 결정이 생성되었으며 수용액 내의 하이드레이트 결정관찰을 위해 물리적인 방법을 이용하였다. HFC-134a 농도가 낮을수록 하이드레이트 결정생성 속도가 둔화되었으며 특히 $N_2$의 함량이 50% 이상일 경우 $N_2$가 확연히 inhibitor 역할을 하였다. 하이드레이트 해리 시에는 기/액 경계면과 수용액 내부에서 매우 다른 양상이 관찰되었으며 하이드레이트 결정이 분해되면서 동공 속에 포집되었던 가스가 방출되는 것을 확인하였다.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2006년 추계학술발표대회 개요집
• /
• pp.169-171
• /
• 2006

Solderability and reaction properties were investigated for four Pb-free alloys as a function of Ag contents; Sn-4.0Ag-0.5Cu, Sn-3.0Ag-0.5Cu, Sn-2.5Ag-0.5Cu, and Sn-1.0Ag-0.5Cu. The alloy of the lowest Ag content, i.e., Sn-1.0Ag-0.5Cu, showed poor wetting properties as the reaction temperature decreased to 230oC. Variation of Ag concentration in the Sn-xAg-0.5Cu alloy shifted exothermic peaks indicating the undercooling temperature in DSC curve. For the aging process at 170oC, the thickness of IMCs at the board-side solder/Cu interface increased with the Ag concentration.

• 대한기계학회논문집B
• /
• 제33권7호
• /
• pp.469-476
• /
• 2009

Most material of engineering interest undergoes solidification process from liquid state. Identifying the underlying mechanism during solidification process is essential to determine the microstructure of material thus the physical properties of final product. In this paper, effect of fluid convection on the dendrite solidification morphology is studied using Level Contour Reconstruction Method. Sharp interface technique is used to implement correct boundary condition for moving solid interface. The results showed good agreement with exact boundary integral solution and compared well with other numerical techniques. Effects of Peclet number and undercooling on growth of dendrite tip of both single and multiple seeds have been also investigated.

• 설비공학논문집
• /
• 제14권2호
• /
• pp.168-174
• /
• 2002

In order to obtain a new heat transfer fluid having a high thermal capacity, micro-capsules of a phase-change material can be a successful candidate to be added into water. In this study, 25, 50, 100, and $200\mu$m diameter micro-encapsulated Lauric acids were tested by a differential scanning calorimeter. The Lauric acid itself had a single freezing curve, but the micro-encapsulated Lauric acid had double freezing curves. The second freezing dominated for $25\mu$m diameter Lauric acids. But the first freeing energy became big as the size of the capsule increased.