• Journal of the Korean Wood Science and Technology
• /
• 제51권3호
• /
• pp.173-182
• /
• 2023

Color is an attribute of visual perception and can be an important factor that affects the preference of customers toward bamboo and wood products. Solar radiation can discolor bamboo surfaces and initiate cracking. The purpose of this study is to investigate the effects of an ultraviolet (UV)-protective coating on the photodiscoloration of untreated and heat-treated Phyllostachys bambusoides bamboo surfaces. Artificial UVA radiators are set at a UVA irradiance of 2,000 W/m² to accelerate the aging of the outer surfaces of hot-air-dried and heat-treated bamboo samples. Half of the samples are coated with transparent UV-protective paint. As the UVA radiation progresses, the discoloration prevention efficiency (DPE) of the UV-protective coating on all samples decreases gradually. The DPEs of the hot-air-dried samples are estimated to be 31.4% and 18.8% after 21 and 72 hours of artificial UVA radiation, respectively. The heat-treated samples exhibit similar trends (29.0% after 21 hours and 10.3% after 72 hours). Recoating the UV-protective paint periodically every six months is expected to minimize the discoloration of the bamboo's outer surface.

• 식물병과 농업
• /
• 제5권1호
• /
• pp.20-26
• /
• 1999

Ultraviolet light is required for the sporulation of Didymella bryoniae, a gummy stem blight fungus in cucurbits such as watermelon, melon, oriental melon, cucumber and pumpkin. In this experiment, the upper limit of wave length for the production of pycnidia of D. bryoniae was 365 nm - 375 nm. Two plastic houses were covered with either common transparent film (wave length longer than 225 nm is transmitted) or UV-absorbing film ( wave lenght shorter than 388 nm is absorbed). In both houses, seedlings inoculated with D. bryoniae were placed in the center of the house at 30 days after transplantation of watermelon (cv. Whanhoseong), and the disease incidences between the houses were compared until 80 days after transplantation. The number of disease lesions and incidence of pycnidia-producing lesions under the UV-absorbing film were reduced by 90% and 80%, respectively, compared to the common transparent film. The internode lengths of plants grown in the two houses were not significantly different, but the plants grown under the UV-absorbing film had longer vines and more leaves than plants under the common transparent film. However, fruit characters such as weight, length, width, rind thick and brix, were not different between the two houses. Occurrence of aphids was reduced in the UV-absorbing film, but those of mites or diseases (powdery mildew and sooty mold) were not different between the houses. These results suggest that disease incidence of gummy stem blight of watermelon in the greenhouse can be controlled by the use of UV-absorbing film.

• 한국환경농학회지
• /
• 제26권3호
• /
• pp.239-245
• /
• 2007

The effect of ultraviolet-B (UV-B) radiation on photosynthesis was studied by the simultaneous measurements of $O_2$ evolution and chlorophyll (Chl) fluorescence in tobacco leaves. When the tobacco leaves were teated with UV-B (1 $W{\cdot}m^{-2}$), the maximal photosynthetic $O_2$, evolution (Pmax; 4.60 ${\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$) at 200 ${\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$) was decreased with increasing time of UV-B treatment showing 80% decline after 4 h treatment. Chl fluorescence parameters were also affected by ultraviolet-B. Fo was increased while both Fm and Fv were decreased, resulted in the decreased of photochemical efficiency of PSII (Fv/Fm). Non-radiative dissipation of absorbed light as heat as estimated as NPQ (Fm/Fm' - 1) was also decreased with increasing time of UV-B treatment while the extent of photochemical quenching (qP) was not changed. Thus, the ratio of (1-qP)/NPQ parameter was also increased with increasing time of UV-B treatment indicating PSII is under the threat of photoinhibition. The result indicate that UV-B primarily decreases the capacity to dissipate excitation energy by trans-thylakoid pH, which in turn inhibits PSII activity.

• 한국안광학회지
• /
• 제13권3호
• /
• pp.7-12
• /
• 2008

목적: 투명과 착색 안경렌즈의 자외선 차단 특성을 평가하고자 하였다. 방법: 안경렌즈의 투과 스펙트럼은 ANSI Z80.1에 제시된 방법으로 측정하였고, UV(200~380 nm; UVA, UVB, UVC) 및 청색광 영역(380~400 nm)에 대하여 각 렌즈의 투과율을 계산하였다. 결과: 중굴절률, 고굴절률의 투명 플라스틱 렌즈 및 착색 플라스틱 렌즈는 UV에서 우수한 자외선 차단 특성을 보였으나, 자외선 차단제를 처리하지 않은 크라운 유리나 CR39는 그렇지 않았다. 고굴절률 렌즈와 눈부심 방지 야간용 렌즈를 제외한 모든 렌즈는 청색광을 효과적으로 차단하지 않았다. 결론: 크라운 유리와 CR39 렌즈는 UV로부터 눈을 보호하기 위해서 자외선 차단제가 필요하다. 또한 고굴절률 렌즈와 눈부심 방지 야간용 렌즈를 제외한 모든 렌즈는 청색광으로부터 눈을 보호하기 위해서 청색광 차단제가 필요하다.

• 한국식품과학회지
• /
• 제40권2호
• /
• pp.228-233
• /
• 2008

식품제조 및 조리 현장에 널리 보급되어 사용되고 있는 자외선 살균소독기의 유효성과 안전성을 검정하기 위하여 자외선램프의 출력 및 거리에 따른 자외선 강도를 측정하였고, 시판 자외선 살균소독기 5종에 대하여 장치 내 자외선 분포를 조사하였으며, 자외선 누출을 검정하였다. 자외선 강도는 램프 출력에 비례하였으며, 근거리(<25 cm)에서는 램프로부터의 거리에, 원거리(>25 cm)에서는 거리의 제곱에 반비례하여 변화하였다. 자외선 살균소독기 내 자외선 강도는 선반의 중앙부에서 가장 높았고, 선반의 중심에서 전후 또는 좌우 방향으로 멀어짐에 따라 감소하였다. 선반 위치에 따른 자외선 강도는 상단 선반과 하단 선반사이에 큰 차이를 보였으며, 각 선반의 외곽부위에서는 자외선강도가 극히 약화되었다. 문틈 등 틈새가 있을 경우 이를 통한자외선 누출은 상당한 수준에 달하였으며, 누출 자외선 강도는거리에 따라 낮아졌다. 자외선이 누출되는 자외선 살균소독기에 대하여 선진국의 자외선 노출 허용량을 근거로 안전작업거리를 제시하였다.

• 한국물환경학회지
• /
• 제28권1호
• /
• pp.57-62
• /
• 2012

In this study, the inactivation efficiency of Mycobacterium marinum was evaluated in buffered water (pH 7) using a low pressure ultraviolet (LP-UV) lamp, ultrasonic (US), and UV/US sequential processes. In the UV alone process, 3 log inactivation of the M. marinum was achieved with a UV dose of $120mJ/cm^2$. However, a tailing phase was later observed because M. marinum has a high tendency for cell aggregation. Even though the M. marinum was not inactivated in the US alone process, the hydrophobicity decreased and turbidity increased due to the crumbling of the cell aggregation. Among the candidate processes which were UV alone, US-UV sequential process and UV-US-UV sequential process, the US-UV sequential process showed the highest synergistic effects for M. marinum inactivation. Consequently, US is a very useful process as a UV irradiation pre-treatment to inactivate M. marinum in water.

• 천문학회보
• /
• 제36권2호
• /
• pp.73.1-73.1
• /
• 2011

An understanding of the ultraviolet (UV) properties of nearby galaxies is essential for interpreting images of high redshift systems. In this respect, the prediction of optical-band morphologies at high redshifts requires UV images of local galaxies with various morphologies. We present the simulated optical images of galaxies at high redshifts using diverse and high-quality UV images of nearby galaxies obtained through the Galaxy Evolution Explorer (GALEX). We measured CAS (concentration, asymmetry, clumpiness) as well as Gini/M20 parameters of galaxies at near-ultraviolet (NUV) and simulated optical images to quantify effects of redshift on the appearance of distant stellar systems. We also discuss the change of morphological parameters with redshift.

• 패션비즈니스
• /
• 제11권6호
• /
• pp.52-61
• /
• 2007

To increase the ultraviolet radiation (UVR) protection of cotton fabric, ultraviolet protection (UVP) materials were treated onto cotton fabric using a new technique, UV-curing. A photocrosslinkablepolymer, poly(ethylene glycol) dimethacrylate was used as a UV-curable resin in the presence of a small amount of photoinitiator. Two kinds of UVP materials were used, UV-absorber, 2,2'-dihydroxy-4-methoxy benzophenone, and UV-scatterer, $TiO_2/ZnO$ Pad-dry-cure method in employing these materials onto cotton was also conducted to compare the effectiveness and the washfastness of UVP treatment between curing methods. UVP treated cotton fabric showed a moderate increase in UVP in case of 2,2'-dihydroxy-4-methoxy benzophenone treatment and a high increase in case of $TiO_2/ZnO$. UV-curing method increased the washfastness of UVP property of $TiO_2/ZnO$ treated cotton fabrics. However, in case of 2,2'-dihydroxy-4-methoxy benzophenone, similar wash fastnesses of UV-cured and pad-dry-cured cotton were observed. It can be presumed that 2,2'-dihydroxy-4-methoxy benzophenone was not significantly affected by water since its hydrophobicity. In short, UV-curing of UVP materials onto cotton was successfully done, and treated cotton fabrics showed the increased UVP properties and an increased washfastness in some extent.

• 상하수도학회지
• /
• 제10권4호
• /
• pp.55-63
• /
• 1996

This research was based on comparing ozonation with combined ozone/ultraviolet oxidation through the methods of reducing THM produced during water treatment. The results were as follows ; 1. The decline of THM concentration was appeared according as ozone dosage increases with ozonation and combined ozone/ultraviolet oxidation. The more effective method was the treatment of irradiating UV then ozonation. In the beginning of reaction the decline rate of THM formation potential was low, I thought it was because that the reaction of ozone and humic acid needed times to be steady state, or that THM formation potential existed according to humic acid. 2. The effect of combined ozone/ultraviolet oxidation when ozone dosage was 4.2mg/L min was almost the same that of ozonation when ozone dosage was 8.6mg/L min. 3. In experiment of TOC decline through ozonation and combined ozone/ultraviolet oxidation, TOC concentration was also dropped according to increasing ozone dosage and the more effective results were showed in treatment of irradiating UV than ozonation. But the similar TOC remove rates were showed in experiment of changing with ozone dosage during combined ozone/ultraviolet oxidation TOC remove rates were low in proportion to the remove rates of THM formation potential, it was considered that humic acid was made low molecule itself though ozonation and ozone/ultraviolet oxidation. Moreover, the high degree of remove efficiency will be get though the treatment of activated carbon of GAC treatment after combined ozone/ultravilet oxidation.

• 한국미생물·생명공학회지
• /
• 제50권1호
• /
• pp.95-101
• /
• 2022

Due to the pandemic caused by COVID-19, the demand for face masks is soaring and has often caused a shortage. The aim of this study was to evaluate the effect of ultraviolet (UV) and drying treatments on microbial contaminants in facial masks. To conduct this study, standard procedures were designed to develop samples contaminated by the control bacteria Escherichia coli, Staphylococcus aureus, and Pseudomonas aeruginosa. The contamination level of the standard samples was approximately 6.30 × 10⁶ CFU/ml, and the UV light treatment was performed 1, 3, 5, and 7 times. To evaluate the effect of the UV and drying treatments, the masks were first treated with UV 1, 2, and 3 times, followed by the drying process. As a result, the mask contaminated with E. coli and P. aeruginosa showed a bacterial rate of approximately 99.9% after 1 UV irradiation, and in the case of the S. aureus-contaminated mask, it exhibited a bactericidal rate of approximately 99.9% after 7 UV irradiations. However, when the drying process was included after UV irradiation, all the samples contaminated with E. coli, S. aureus, and P. aeruginosa showed a bactericidal rate of 99.9% or more. The results of this study suggest that UV and drying treatments can effectively reduce the bacterial contaminants in facial masks. In addition, these results provide fundamental data and appropriate sterilization methods for reusing masks.