• 생명과학회지
• /
• 제9권3호
• /
• pp.248-252
• /
• 1999

Effects of the ultrasonic treatment on plant represents antifeeding activity and chitin synthesis inhibition activity against diamondback moth (Plutella xylostella L.) by a leaf-dipping method at a concentration of 5,000ppm. Methanol extracts of leaves of the ultrasonic treatment on plant was sequentially partitioned with n-hexane, chloroform, ethlyacetate, butanol and water fractions, and bioassayed. Antifeeding activities were observed in n-hexane, chloroform and ethlyacetate fractions. N-hexane fraction has 94.6% of strongest antifeeding activity against P. xylostella. From the n-hexane sequentially partitioned showed H6 and H8 fractions of antifeeding activities against P. xylostella. And chitin synthesis inhibition activity against P. xylostella was obtained the methaol, n-hexane and water fractions.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2007년도 추계학술발표대회 및
• /
• pp.154.2-154.2
• /
• 2007

• 한국분말재료학회지
• /
• 제29권6호
• /
• pp.485-491
• /
• 2022

Lithium lanthanum titanium oxide (LLTO) is a promising ceramic electrolyte because of its high ionic conductivity at room temperature, low electrical conductivity, and outstanding physical properties. Several routes for the synthesis of bulk LLTO are known, in particular, solid-state synthesis and sol-gel method. However, the extremely low ionic conductivity of LLTO at grain boundaries is one of the major problems for practical applications. To diminish the grain boundary effect, the structure of LLTO is tuned to nanoscale morphology with structures of different dimensionalities (0D spheres, and 1D tubes and wires); this strategy has great potential to enhance the ion conduction by intensifying Li diffusion and minimizing the grain boundary resistance. Therefore, in this work, 0D spherical LLTO is synthesized using ultrasonic spray pyrolysis (USP). The USP method primarily yields spherical particles from the droplets generated by ultrasonic waves passed through several heating zones. LLTO is synthesized using USP, and the effects of each precursor and their mechanisms as well as synthesis parameters are analyzed and discussed to optimize the synthesis. The phase structure of the obtained materials is analyzed using X-ray diffraction, and their morphology and particle size are analyzed using field-emission scanning electron microscopy.

• 한국시뮬레이션학회:학술대회논문집
• /
• 한국시뮬레이션학회 2001년도 The Seoul International Simulation Conference
• /
• pp.477-483
• /
• 2001

Optimum directivity synthesis of ultrasonic transducers in linear array is considered. To realize the desired directivity, a robust and efficient method is proposed which is the direct inversion combined with the iterative DFP (Davidon-Fletcher-Powell) method. A quasi-ideal beam with the beam width and the steering beam angle specified are chosen for the numerical demonstrations. The demonstration is then extended to the case of multi-beams. The proposed combination method shows quick convergence over the single LMS or DFP method at the expense of the system matrix inversion.

• 한국전기전자재료학회논문지
• /
• 제27권12호
• /
• pp.852-856
• /
• 2014

$BaTiO_3$ nano powder can be synthesized by hydrate salt method at $120^{\circ}C$ in air. Decreasing the thickness of thick film, the nano dielectric particle is needed in electronic ceramics. However, the synthesis of $BaTiO_3$ nano particle at low temperature in air and their mechanism were not reported enough. And ultrasonic treatment can be tried because of low temperature process in air. Therefore, in this study, the $BaTiO_3$ nano powder was synthesised with the synthesis time and ultrasonic treatment at $120^{\circ}C$ in air. In the synthesis process, the effects of process were evaluated. From the experimental observation, the synthesis mechanism was proposed. The homogeneous $BaTiO_3$ particle was synthesised by KOH salt solution at $120^{\circ}C$ for 1hour. It was conformed that the ultrasonic treatment effected on the increase of synthesis rate. After cutting the salt powder using FIB, $BaTiO_3$ nano particles observed homogeneously in the cross-section of the salt particle.

• Bulletin of the Korean Chemical Society
• /
• 제31권11호
• /
• pp.3180-3182
• /
• 2010

A simple facile 'one pot' synthesis of 2-amino-3-cyano-4,6-diarylpyridine derivatives via three component reaction of chalcone, malanonitrile and ammonium acetate under ultrasonic irradiation and grindstone technology. All the synthesized compounds have been characterized on the basis of their elemental analyses and spectral data (IR, $^1H$ NMR, $^{13}C$ NMR and Mass).

• 한국분말재료학회지
• /
• 제24권4호
• /
• pp.326-331
• /
• 2017

The structural formation of inorganic nanoparticles dispersed in polymer matrices is a key technology for producing advanced nanocomposites with a unique combination of optical, electrical, and mechanical properties. Barium titanate ($BaTiO_3$) nanoparticles are attractive for increasing the refractive index and dielectric constant of polymer nanocomposites. Current synthesis processes for $BaTiO_3$ nanoparticles require expensive precursors or organic solvents, complicated steps, and long reaction times. In this study, we demonstrate a simple and continuous approach for synthesizing $BaTiO_3$ nanoparticles based on a salt-assisted ultrasonic spray pyrolysis method. This process allows the synthesis of $BaTiO_3$ nanoparticles with diameters of 20-50 nm and a highly crystalline tetragonal structure. The optical properties and photocatalytic activities of the nanoparticles show that they are suitable for use as fillers in various nanocomposites.

• 한국세라믹학회지
• /
• 제38권10호
• /
• pp.921-927
• /
• 2001

카올린으로부터 알루미나를 추출 노는 한성에 미치는 초음파 효과를 조사하기 위하여 반응시간, 반응온도 및 산농도의 동일한 조건하에서 알루미나 추출 및 합성에 초음파 조사법과 재래식법을 사용하였다. 재래식법에 비하여 초음파 조사법은 $60{\sim}80^{\circ}C$, $1{\sim}6\;h$ 및 $1{\sim}5\;M$ ${H_2}{SO_4}$와 같은 다양한 조건하에서 알루미나 추출을 촉진시켰다. 초음파 조사법 및 재래식법에 의해 합성된 침전물과 하소된 시료들의 특성들이 DTA/TG, XRD, SEM, PSA, BET 등에 의해 분석되어졌다. 특히, 재래식법으로 합성된 하소시료들에 비하여 초음파 조사법으로 합성된 시료들은 상대적으로 입자 크기는 작고, 비표면적이 큰 특성을 자지고 있었다.

• 한국재료학회지
• /
• 제16권11호
• /
• pp.687-691
• /
• 2006

Synthesis of Iron oxides by air oxidation of $FeSO_4$ solutions in the presence of NaOH, Diethylenetriamine (DETA), Butylamine (BA) and influence of ultrasonic wave were investigated by XRD, SEM and particle size analyzer. As the DETA addition increased to 0.05 mol, $Fe_3O_4$ was formed with goethite($\alpha$- FeOOH) and $Fe_3O_4$ single phase was formed above 0.18mol of DETA. As the BA addition increased, the XRD peak intensity of (020) face of lepidocrocite($\gamma$-FeOOH) was developed until the formation of $Fe_3O_4$ and reduced the size of the iron oxide particles formed. Ultrasonic wave reduced the size of the iron oxide particles but gave little effects on the iron oxide particles synthesized by amine.

• 한국분말재료학회지
• /
• 제14권1호
• /
• pp.19-25
• /
• 2007

This study was focused on the optimization of low-pressure ultrasonic spraying process for synthesis of pure ${\gamma}-Fe_2O_3$ nanoparticles. As process variables, pressure in the reactor, precursor concentration, and reaction temperature were changed in order to control the chemical and microstructural properties of iron oxide nanoparticles including crystal phase, mean particle size and particle size distribution. X-ray diffraction (XRD) and transmission electron microscopy (TEM) studies revealed that pure ${\gamma}-Fe_2O_3$ nanoparticles with narrow particle size distribution of 5-15 nm were successfully synthesized from iron pentacarbonyl ($Fe(CO)_{5}$) in hexane under 30 mbar with precursor concentrations of 0.1M and 0.2M, at temperatures over $800^{\circ}C$. Also magnetic properties, coercivity ($H_c$) and saturation magnetization ($M_s$) were reported in terms of the microstructure of particles based on the results from vibration sampling magnetometer (VSM).