• 비파괴검사학회지
• /
• 제13권1호
• /
• pp.15-20
• /
• 1993

This study describes ultrasonic reflection at a water/fiber reinforced polymer composite/water interface. Theoretical predictions of reflected beam amplitudes are also presented. Four different polymer composite laminates are investigated : T300/5208 graphite/epoxy $[0]_{31T},\;[45/90/-45/0]_{3S},\;[45/-45]_{2S}$, and S-2 glass/epoxy $[0/90]_{4S}$. The analytical leaky plate wave dispersion curves for the unidirectional laminate and other three laminates can be obtained by searching for the minimum magnitude of the reflection coefficient.

• 비파괴검사학회지
• /
• 제15권2호
• /
• pp.364-370
• /
• 1995

본 논문은 초음파법을 이용하여 소결 재료의 비파괴적인 평가 방법을 확립하는데 목적을 두고 있다. 소결 재료의 밀도는 소결체로 제작되는 동안 금형과 분말사이의 마찰 때문에 부분적으로 불균질한 분포를 가지고 있으며 이 불균질성은 에너지 감쇠 계수 및 초음파 반사 에코의 주파수 스펙트럼에 있어 중심 주파수의 변화량에 의해 조사되었다. 초음파의 속도, 탄성계수, 포와송 비는 소결 재료의 밀도와 비례 관계에 있었으며 저면 반사파의 중심 주파수는 초음파의 전파 거리의 증가 및 밀도의 감소에 따라 저주파수 쪽으로 이동하였으나 에너지 감쇠 계수는 밀도의 증가에 따라 감소하고 있었다. 본 논문에서는 반사파의 주파수 스펙트럼에 있어 중심 주파수의 변화가 소결 재료의 비파괴적인 평가 방법으로써의 가능성을 보여주고 있다.

• 비파괴검사학회지
• /
• 제24권4호
• /
• pp.348-353
• /
• 2004

이 연구는 터빈베어링의 신뢰성을 평가하기 위하여 초음파 C-Scan 방법을 적용한 기술이다. 수침법에 관한 연구는 실험실과 현장검사 적용에 광범위하게 사용되는 기술이다. 여기에서는 C-Scan 방법을 이용하여 베어링의 모재와 Babbitt 금속간 경계부의 상태를 평가하였다. 수침법 C-Scan 방법에 의한 초음파 영상은 베어링 경계부의 상태를 확인하는데 효과적인 방법으로 사용될 수 있었다. 초음파 영상의 분해능을 높이기 위하여 집속형 탐촉자를 사용하고, Babbitt 금속과 베어링 모재간의 접합경계면에서 발생하는 초음파 음압 반사율을 측정하여 결함의 검출과 면적을 추정할 수 있었다. 초음파 수침법은 베어링 접합부의 박리위치와 박리면적의 경계면을 결정하여 크기를 계산하는데 아주 유용하게 사용될 수 있는 기술이며, 이 연구에서 개발된 기술은 화력발전소에서 사용되고 있는 터빈베어링의 건전성을 확보하는데 적용되었다.

• Journal of Welding and Joining
• /
• 제22권5호
• /
• pp.32-37
• /
• 2004

Application of bonding by adhesives can be found in many industries, particularly in advanced technological domains such as aeronautical and space, automobile and electronics industries. Periodic inspection with conventional ultrasonic NDE techniques is capable of indicating the presence and possible location of crack. Continuous ultrasonic attenuation monitoring has potential to supply information. This article discusses the use of pulse-echo ultrasonic testing for the inspection of adhesive bonds between metal sheets. The method is based on the measurement of the reflection coefficient at the metal/adhesive interface. By means of a control experiment it is shown that Quantitative Nondestructive Evaluation in Adhesive Joints are evaluated together with Ultrasonic Testing and Fracture Testing.

• 대한기계학회논문집A
• /
• 제32권7호
• /
• pp.590-596
• /
• 2008

The ultrasonic velocities of sintered aluminum with varying density were measured in order to deduce the mechanical properties for optimum design of the sintered aluminum. Specimens with different densities were prepared by the plasma activated sintering machine. The density distribution of sintered aluminum becomes partially inhomogeneous because of the friction between the powder and the die during compaction. The elastic moduli are increased as the ultrasonic velocity is increased. Furthermore, Poisoon's ratio is depending on not only the density but also the size and distribution of voids. As the specimen's thickness increases, the center frequency in the frequency spectrum of the reflection wave is shifted to the low frequency. The attenuation coefficient of ultrasonic wave is decreased inversely as the density increased.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2001년도 제17회 학술발표회 논문초록집
• /
• pp.90-93
• /
• 2001

In the present work, ultrasonic testing method has been developed to evaluate adhesive layers in rocket motor case assembly for the reliability of the rocket. The main objective of the present work was to find debonding between steel and rubber layers. The relationship between adhesion ratio and reflected ultrasonic amplitude was calculated by considering reflection coefficient at the interface between steel and rubber layers. It was found that the higher amplitude of ultrasound is reflected for the debonding area, and shown good agreements with experimental results. The ultrasonic C-scan images offers good implements for the determination of debonding area. The nondestructive testing results were compared with the micrography of destruective testing. As results, ultrasonic testing could be utilized for the evaluation of adhesive layer in the rocket motor case assembly.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2012년도 제38회 춘계학술대회논문집
• /
• pp.230-237
• /
• 2012

확대부 내열재의 스틸과 FRP 사이에 존재하는 미접착 결함과 미충전 결함을 검출하기 위해 초음파 공진법을 적용하였다. 초음파 공진법은 초음파 신호가 증폭되기 때문에 펄스에코법으로 검출하기 어려운 미접착 결함 및 에폭시 미충전 결함을 쉽게 검출할 수 있다. 공진 주파수는 삼중 매질의 음압 반사계수를 이용하여 예측하였고, 시험편의 초음파 신호에 대해 고속푸리에변환을 실시하여 측정하였다. 예측한 공진 주파수는 측정한 공진 주파수와 일치하므로 초음파 공진을 입증하였다.

• 한국음향학회지
• /
• 제16권4호
• /
• pp.85-89
• /
• 1997

본 논문에서는 다층구조물에 초음파를 입사시켰을 때 반사된 신호를 켑스트럼 기법으로 신호처리하여 각 층의 임피던스 변화를 해석하였다. 이를 위하여 각 층에서 반사된 초음파 반사신호에 삼중 켑스트럼 기법을 적용하여 최대 진폭과 극성을 구하고 이러한 값으로 각 층의 반사계수를 산출하므로써 임피던스를 구할 수 있었다. 실험을 위하여 얻어진 반사신호를 켑스트럼 처리하여 임피던스를 측정한 결과 이론치와 잘 일치하였다.

• 대한의용생체공학회:의공학회지
• /
• 제14권3호
• /
• pp.273-282
• /
• 1993

This study is concerned with the temperature dependence characteristics of ultrasound parameters in biological tissues, which are basic on the noninvasive deep body temperature estimation. Used parameters are ultrasonic attenuation coefficient and sound velocity In order to accomplishment our purpose, several signal processing methods were used. Attenua4iorl coefficient was estimated by spectral difference method and sound velocity was estimated by P-P method. And we also examined these methods through a series of IN VITRO experi mentis that used tissue-mimicking phantom samples and biological tissue samples. In order to imitate the biological soft tissue two kinds of phantom samples are used, one is agar phantom sample which is composed of agar, graphite, N-propyl alcohol and distilled water, and the other is fat phantom sample which is composed of pure animal fat. And the ultrasound transmission mode and reflection mode experiments are performed on the pig's spleen, kidney and fat. As a result, it is found that the temperature characteristics are uniform in case of phan- tom samples but not in biological tissues because of complicate wave propagation within them. Consequently, the possibility of temperature measurement using ultrasound on biological tissue is confirmed and its results may contribute to the establishment of reference values of internal temperature measurement of biological tissues.

• 대한의용생체공학회:의공학회지
• /
• 제5권1호
• /
• pp.55-62
• /
• 1984

A digital spectrum analysis technique was used to estimate the tissue characteristic parameters (transmission velocity and attenuation coefficient) in the phantom study and the human liver's ultrasound scanning. The soft tissue equivalent phantom was made with the combination materials of agar, water, powdered graphite, and n-propyl alcohol. In the human study, twenty five normal subjects and three patients with liver diseases were studied using the ultrasonic reflection signals and the spectrum analysis method The following results were obtained; 1. The soft tissue-equivalent materical could be produced with various acoustic parameters by changing the composition amount of the powdered graphite and n-propyl alcohol. 2. Attenuation coefficients of normal human liver tissue were estimated to be 0. 36 dB/cm MHz$\pm$0.11. In patients with liver disese, tile attenuation coefficients were shown to be different from the above normal values.