• 한국재료학회지
• /
• 제31권11호
• /
• pp.593-600
• /
• 2021

Herein, a series of g-C₃N₄ modified Bi₂MoO₆ nanocomposites using Bi₂MoO₆ and melamine as original materials are fabricated via sintering process. For presynthesis of Bi₂MoO₆ an ultrasonic-assisted hydrothermal technique is researched. The structure and composition of the nanocomposites are characterized by Raman spectroscopy, X-ray diffraction (XRD), and high-resolution field emission scanning electron microscopy (SEM). The improved photoelectrochemical properties are studied by photocurrent density, EIS, and amperometric i-t curve analysis. It is found that the structure of Bi₂MoO₆ nanoparticles remains intact, with good dispersion status. The as-prepared g-C₃N₄/Bi₂MoO₆ nanocomposites (BMC 5-9) are selected and investigated by SEM analysis, which inhibits special morphology consisting of Bi₂MoO₆ nanoparticles and some g-C₃N₄ nanosheets. The introduction of small sized g-C₃N₄ nanosheets in sample BMC 9 is effective to improve the charge separation and transfer efficiency, resulting in enhancing of the photoelectric behavior of Bi₂MoO₆. The improved photoelectronic behavior of g-C₃N₄/Bi₂MoO₆ may be attributed to enhanced charge separation efficiency, photocurrent stability, and fast electron transport pathways for some energy applications.

• Advances in nano research
• /
• 제14권5호
• /
• pp.435-442
• /
• 2023

Sports activities, including playing tennis, are popular with many people. As this industry has become more professionalized, investors and those involved in sports are sure to pay attention to any tool that improves athletes' performance Tennis requires perfect coordination between hands, eyes, and the whole body. Consequently, to perform long-term sports, athletes must have enough muscle strength, flexibility, and endurance. Tennis rackets with new frames were manufactured because tennis players' performance depends on their rackets. These rackets are distinguished by their lighter weight. Composite rackets are available in many types, most of which are made from the latest composite materials. During physical exercise with a tennis racket, nanocomposite materials have a significant effect on reducing injuries. Materials as strong as graphite and thermoplastic can be used to produce these composites that include both fiber and filament. Polyamide is a thermoplastic typically used in composites as a matrix. In today's manufacturing process, materials are made more flexible, structurally more vital, and lighter. This paper discusses the production, testing, and structural analysis of a new polyamide/Multi-walled carbon nanotube nanocomposite. This polyamide can be a suitable substitute for other composite materials in the tennis racket frame. By compression polymerization, polyamide was synthesized. The functionalization of Multi-walled carbon nanotube (MWCNT) was achieved using sulfuric acid and nitric acid, followed by ultrasonic preparation of nanocomposite materials with weight percentages of 5, 10, and 15. Fourier transform infrared (FTIR) and Nuclear magnetic resonance (NMR) confirmed a synthesized nanocomposite structure. Nanocomposites were tested for thermal resistance using the simultaneous thermal analysis (DTA-TG) method. scanning electron microscopy (SEM) analysis was used to determine pores' size, structure, and surface area. An X-ray diffraction analysis (XRD) analysis was used to determine their amorphous nature.

• Steel and Composite Structures
• /
• 제48권1호
• /
• pp.19-25
• /
• 2023

Due to high application of concrete structures in construction industry, however, the quality improvement is essential. One of the new ways for this purpose is adding the nanoparticles to the concrete. In this work, vibration analysis of concrete beams reinforced by graphene oxide (GO) nanoparticles based on mathematical model has been investigated. For the accuracy of the presented model, the experimental study is done for comparing the compressive strength. Since the nanoparticles can not be solved in water without any specific process, at the first, GO nanoparticles should be dispersed in water by using shaker, magnetic striker, ultrasonic devices and finally mechanical mixer. For modelling of the strucuture, sinusoidal shear deformation beam theory (SSDBT) is utilized. Mori-Tanak model model is utilized for obtaining the effective properties of the beam including agglomeration influences. Utilizing the energy method and Hamilton's principal, the motion equations are calculated. The frequency of the concrete beam is obtanied by analytical method. Three samples with 0.02% GO nanoparticles are built and its compressive strength is compared which shows a good accuracy with maximum 1.29% difference with mathematical model and other papers. The aim of this work from the theoretical study is investigating the effects of nanoparticles volume percentage and agglomeration, length and thickness of the beam on the frequency of the structure. The results show that the with enhancing the GO nanoparticles, the frequency is increased. For example, with enhancing the volume percent of GO nanoparticles from zero to 0.08%, the compressive strength is increased 48.91%. and 46.83%, respectively for two cases of with and without agglomeration.

• 청정기술
• /
• 제18권4호
• /
• pp.390-397
• /
• 2012

토양 세척공정을 이용한 창원시 군사격장 내 납(Pb) 오염토양의 물리 화학적 특성을 분석하였으며, 토양 세척인자(세척제(HCl) 농도(0.001, 0.01, 0.1, 0.2 N), 진탕비(1 : 2, 1 : 3, 1 : 4, 1 : 5), 오염토양 입경 4~0.075 mm, 세척시간(5, 10, 15, 20, 30, 60, 120분) 등)에 따른 오염토양 중 납의 제거특성을 평가하였다. 세척제 농도에 따른 제거효율은 세척제의 농도가 증가할수록 높게 나타났다. 이 중 세척시간 15분에서 납(Pb)제거효율은 56.3%로 0.1 N 염산(HCl)이 실제 토양 세척공정에 적용 가능한 최적의 농도로 나타났으며, 토양과 세척제의 진탕비가 1 : 2에서 1 : 5로 증가할수록 제거효율은 높아지는 경향을 보였지만, 진탕비가 높아질수록 토양 세척설비의 규모 증대로 인한 경제적 측면을 고려해 볼 때 최적의 진탕비는 1 : 3으로 생각된다. 세척시간 20분까지 납 제거효율은 75.3%까지 증가하다가 이후 유사한 경향을 보여 최적의 세척시간은 20분으로 판단된다. 토양 입경 0.075 mm 이상의 입경에서 납 제거효율은 77.0~82.0%의 범위를 나타내었으나, 입경 0.075 mm 이하의 경우 52.8%로 감소하였다. 오염토양의 입경별 제거효율은 0.075 mm 이상의 입경에서는 높은 제거효율을 나타낸 반면에 0.075 mm 이하의 입경에서는 제거효율이 현저히 감소되어 컷오프(cut-off) 크기는 0.075 mm가 적절할 것으로 기대된다. 토양 세척공정에 초음파 발생장치를 적용한 제거효율 평가 결과, 입경 0.075 mm 이상에서 물세척 및 염산의 단독세척보다 염산과 초음파의 동시 세척방법이 가장 높은 납 추출율을 나타내었다.

• 상하수도학회지
• /
• 제19권4호
• /
• pp.497-505
• /
• 2005

Domestic Sewage Treatment Plants are mostly based on biological treatment, in which large amounts of excess sludge are generated and occupy about 40 ~ 60% of the total sewage treatment costs. Several methods for sludge treatment has been so far reported as upgrading biodegradation of sludge; heat treatment, chemical treatment, including thermo-alkali and ozone, mechanical treatment including ultrasonic pulverization. But, it has a limitation in case of reducing the amount of excess sludge which are already producted. In this study, application of excess sludge reduction process using thermophilic aerobic bacteria for activated sludge was examined. The research was carried out two different stage. one for a biological wastewater treatment and the other for a thermophilic aerobic solubilization of the waste sludge. A portion of excess sludge from the wastewater treatment step was into the thermophilic aerobic sludge solubilization reactor, in which the injected sludge was solubilized by thermophilic aerobic bacteria. The solubilized sludge was returned to the aeration tank in the wastewater treatment step for its further degradation. Sludge solubilization reactor was operated at $63{\pm}2^{\circ}C$ with hydraulic retention time(HRT) of 1.5 ~ 1.7 day. Control group was operated with activated sludge process(AS) and experiment group was operated with three conditions(RUN 1, RUN 2, RUN3). RUN 1 was operated with AS without sludge solubilization reactor. RUN 2 were operated with AS with sludge solubilization reactor to examine correlation between sludge circulation ratio and sludge reduction ratio by setting up sludge circulation ratio to 3. RUN 3 was operated with sludge circulation ratio of 3 and MLSS concentration of 1,700~2,000mg/L to examine optimum operation condition. The quantity of excess sludge production was reduced sharply and in operation of RUN 3, sludge The quantity of excess sludge production was reduced sharply and in operation of RUN 3, sludge solubilization ratio and sludge reduction ratio were 53. 7%, 95.2% respectively. After steady state operation, average concentration of TBOD, SBOD, $TCOD_{Cr}$, $SCOD_{Cr}$, TSS, VSS, T-N, T-P of effluent were 4.5, 1.7, 27 .8, 13.8, 8.1, 6.2, 15.1, 1.8mg/L in the control group and were 5.6, 2.0, 28.6, 19.1, 9.7, 7.2, 16.1, 2.0mg/L in the experimental group respectively. They were appropriate to effluent standard of Sewage Treatment Plants.

• 자원리싸이클링
• /
• 제10권3호
• /
• pp.51-59
• /
• 2001

본 연구는 폐 카본 슬러지로부터 불순물을 제거하여 고품위 수성 카본을 제조하고자 수행되었다. 수성 카본 슬러지는 NH$_3$를 제조하기 위해서 물의 불꽃 반응에 의해 수소가스를 생산하는 동안 부산물로써 다량 발생된다. 발생된 카본 슬러지는 황, 철, 애쉬 등의 다량의 불순물을 함유하고 있어 탈수 후 일부 저품위 카본 원료로 사용되고, 나머지는 소각되어지고 있다. 고품위 수성 카본은 기능성 카본 블랙으로써 제조가 어려울 뿐만 아니라 제조시 환경오염문제와도 밀접한 관련이 있기 때문에 오일블랙에 비해 3~5배의 가격이 비싸다. 고품위 수성 카본은 일반적으로 밧데리, 플라스틱 착색제, 전선피복 고무 첨가제 등에 사용되어지고 있다. 수성카본 슬러지를 전도체로써 사용하기 위해서는 99%이상의 탄소와 매우 낮은 불순물을 함유하고 있어야한다 따라서 제품에 막대한 영향을 미치게되는 불순물의 제거가 필수적으로 이루어져야 한다. 본 연구는 폐카본슬러지로부터 불순물을 제거하기 위해서 분쇄, 자력선별. 부유선별, 초음파처리 등을 포함한 불순물 정제실험을 수행하였다. 실험결과 전도체로써 사용하기 위한 조건을 만족하는 애쉬0.01%, 철 0.01%, 황 0.3%이하로 대부분의 불순물을 제거하였고, 비표면적은 930 m$^2$/g을 나타냈다.

• 대한환경공학회지
• /
• 제31권12호
• /
• pp.1113-1122
• /
• 2009

하수슬러지의 해양투기 배출규제에 대한 대체 처리방안으로, 하수슬러지의 초음파 가용화를 통한 재기질화와 하수처리 공정에 대한 개선을 통한 슬러지 발생량의 저감방안을 살펴보았다. 분리막 반응조(MBR) 실험을 통해 SRT를 점진적으로 SRT=5.1일에서 442일까지 증가시켰으며, 이때 반응조내 미생물의 평균 농도값은 $c_B$=3.4 $gTSSL^{-1}$에서 $c_B$=14.5 $gTSSL^{-1}$까지 증가하였다. 이때 기질제거율과 미생물의 성장량과의 관계를 나타내는 미생물 수율($Y_{B/S}$)는 SRT=5.1일 일때의 약 0.5-0.7에 비해 SRT=442일 일때 0.005-0.007로 저감되어, 직접적인 슬러지 발생량의 감소를 가져오게 되는 것을 확인하였다. 반응 조내 미생물 농도와 폭기효율과의 관계를 프로펠러 루프 반응조에서 교반속도에 따른 산소전달계수와 ${\alpha}$-factor의 변화로써 살펴보았다. 한편 슬러지에 대한 초음파 가용화는 에너지 투입량에 따라 가용화 효율이 증가하고, 가용화한 슬러지의 혐기성 소화효율은 가용화하지 않은 슬러지에 비해 바이오가스 발생량이 많았다.

• Journal of Astronomy and Space Sciences
• /
• 제29권4호
• /
• pp.381-387
• /
• 2012

The planetary exploration rover executes various missions after moving to the target point in an unknown environment in the shortest distance. Such missions include the researches for geological and climatic conditions as well as the existence of water or living creatures. If there is any obstacle on the way, it is detected by such sensors as ultrasonic sensor, infrared light sensor, stereo vision, and laser ranger finder. After the obtained data is transferred to the main controller of the rover, decisions can be made to either overcome or avoid the obstacle on the way based on the operating algorithm of the rover. All the planetary exploration rovers which have been developed until now receive the information of the height or width of the obstacle from such sensors before analyzing it in order to find out whether it is possible to overcome the obstacle or not. If it is decided to be better to overcome the obstacle in terms of the operating safety and the electric consumption of the rover, it is generally made to overcome it. Therefore, for the purpose of carrying out the planetary exploration task, it is necessary to design the proper suspension system of the rover which enables it to safely overcome any obstacle on the way on the surface in any unknown environment. This study focuses on the design of the new double 4-bar linkage type of suspension system applied to the Korea Aerospace Research Institute rover (a tentatively name) that is currently in the process of development by our institute in order to develop the planetary exploration rover which absolutely requires the capacity of overcoming any obstacle. Throughout this study, the negative moment which harms the capacity of the rover for overcoming an obstacle was induced through the dynamical modeling process for the rocker-bogie applied to the Mars exploration rover of the US and the improved version of rocker-bogie as well as the suggested double 4-bar linkage type of suspension system. Also, based on the height of the obstacle, a simulation was carried out for the negative moment of the suspension system before the excellence of the suspension system suggested through the comparison of responding characteristics was proved.

• 한국수소및신에너지학회논문집
• /
• 제30권6호
• /
• pp.523-530
• /
• 2019

For the low-Pt electrodes for polymer electrolyte fuel cells (PEMFCs), the optimization of ionomer content for anode catalyst layers was carried out. A commercial catalyst of 20 wt.% Pt/C was used instead of 50 wt.% Pt/C which is commonly used for PEMFCs. The ionomer content varies from 0.6 to 1.2 based on ionomer to carbon ratio (I/C) and the catalyst layer is formed over the electrolyte by the ultrasonic spray process. Evaluation of the prepared MEA in the unit cell showed that the optimal ionomer content of the air electrode was 0.8 on the I/C basis, while the hydrogen electrode was optimal at the relatively high ionomer content of 1.0. In addition, a large difference in cell performance was observed when the ionomer content of the hydrogen electrode was changed. Increasing the ionomer content from 0.6 to 1.0 by I/C in a hydrogen electrode with 0.05 mg/㎠ platinum loading resulted in more than double cell performance improvements on a 0.6 V. Through the analysis of various electrochemical properties in the single cell, it was assumed that the change in ionomer content of the hydrogen electrode affects the water flow between the hydrogen and air electrodes bounded by the membrane in the cell, which affects the overall performance of the cell. A more specific study will be carried out to understand the water flow mechanism in the future, and this study will show that the optimization process of hydrogen electrode can also be a very important cell design variable for the low-Pt and high-performance MEA.

• 자원환경지질
• /
• 제55권4호
• /
• pp.317-338
• /
• 2022

근대건축으로 알려진 조선통감부 자리의 콘크리트와 토관 및 벽돌을 대상으로 3시기로 세분하여 물리화학적 특성과 평가를 검토하였다. 콘크리트는 모두 비슷한 가비중과 흡수율을 보였으며 다량의 골재와 석영, 장석, 방해석 및 포틀란다이트가 검출되었다. 벽돌의 공극률은 1907년의 것이 1910년 및 1950년 벽돌보다 높았다. 토관도 유사하나 초기의 것이 보다 치밀한 것으로 나타났다. 벽돌과 토관은 암적색에서 암갈색을 띠며 많은 균열과 기공이 관찰되나, 상대적으로 토관의 기질이 균질하다. 벽돌에서는 석영, 장석 및 적철석이 검출되었으며, 토관에서는 석영 및 장석과 뮬라이트가 확인되는 것으로 보아, 모두 1,000~1,100℃의 소성온도를 거친 것으로 해석된다. 콘크리트는 유사한 CaO 함량을 보이나, 벽돌과 토관은 1907년 시료에서 SiO₂는 낮고 Al₂O₃가 높다. 그러나 이들은 유사한 지구화학적 거동특성을 갖는 등 성인적 동질성이 높다. 콘크리트 기초의 초음파속도와 반발경도는 잔존상태에 따라 다르나 물성은 다소 낮았다. 이를 일축압축강도로 환산하면 1차 증축구역이 평균 45.30 및 46.33 kgf/cm²로 가장 높고, 2차 증축구역이 가장 낮은 평균치(20.05 및 24.76 kgf/cm²)를 보였다. 특히 CaO 함량과 흡수율이 작을수록 초음파속도와 반발경도가 높았다. 조선통감부 건축에 활용한 콘크리트는 시기별로 비슷한 배합특성과 비교적 일정한 규격이 있었던 것으로 보인다. 벽돌과 토관은 거의 동일한 점토질 원료를 사용하여 유사한 제작과정을 거친 것으로 해석된다.