• 설비공학논문집
• /
• 제16권3호
• /
• pp.250-257
• /
• 2004

Recently, the use of UVC lamps inside building air-conditioning system has been increasing in both medical and nonmedical buildings for the control of environmental microorganisms. In the present study, irradiance performance test of UVC lamp was carried out and surface sterilization effect of UV ray was investigated by using UV ray irradiation experimental chamber and pilot system. Experimental results show that the effective irradiance of UVC lamp is strongly dependent on air velocity and temperature with exception of relative huminity in air-conditioning system. An individual microbiological kill effectiveness experiment also shows that the fractional kill of two microbiological samples such as E. Coli and Legionella is roughly the same as the estimated fractional kill in the case of chamber test and pilot system test.

• 도서관문화
• /
• 제17권2호
• /
• pp.3-8
• /
• 1976

We sampled the fungi on the grounds of the floor and books in the library for the purpose of attack the fungi in the traditional library. We cultured it on the Sabouraud Dextrose Agar(Baltimore Biological Laboratory) and was obtained the fungi of six species, Here irradiated the ultra violet lamp(100V, 15W, 253Å), which was occurred to the colony after 24 hours. And irradiation by 2hrs/day for 2days here. The other method, we were sterilized test by the methanal fumigation The following results were obtained 1. All rearing is suspensed the result of the ultra violet rays irradiation, but the colony that is gained from the grounds of the floor in the library is not sterilized. 2. The result of air tight box to methanal 14ℊ/㎥ for the 24hours fumigation, each test group(the fungi of six species) is all sterilized.

• 반도체디스플레이기술학회지
• /
• 제6권1호
• /
• pp.65-69
• /
• 2007

A design of experiments was applied in order to investigate the effect of processing variables in UV irradiation on the electrical/optical properties in indium-zinc oxide thin films, The processing variables, equivalently input variables are listed as UV irradiation time, oxygen flow rate, and chamber pressure. The statistical significance of Ultra Violet (UV) treatment was confirmed using a paired-t test. The full factorial $2^3$ design was employed to determine significant main and interaction effects in UV irradiation process. The chamber pressure and the interaction between UV irradiation time and $O_2$ flow rate were found to be statistically significant at the significance level of 0.1. Furthermore, the optimized approach was proposed in achieving the improved conductivity after UV irradiation.

• 한국도로학회논문집
• /
• 제13권4호
• /
• pp.93-101
• /
• 2011

본 연구는 칼라아스팔트 포장의 표면 색채를 보수하기 위하여 사용되는 칼라코팅 공법에 대한 평가를 버스전용 차선에서 실시한 실내외 시험에 관한 연구이다. 교통과 시간의 경과에 따라 칼라아스팔트 표면은 탈변색, 마모가 발생하여 표면 색상에 손상이 발생하게 된다. 총 9개 공법에 대하여 평가를 실시하였다. 실내시험 항목으로 UV시험, 부착성능 및 타버시험장치를 사용하여 내마모시험을 실시하고 현장시험으로는 BPT를 이용한 미끄럼저항시험과 현장 육안조사를 실시하였다. 실험 결과 각 공법들은 서로 다른 공학적 특징을 보였는데 이러한 결과는 각 공법에 사용한 주재료와 관련이 있는 것으로 판단하였다. 고무에폭시를 주재료로 사용한 공법이 평가된 공법 중에서 만족할만한 결과를 보였으나 100일 후 현장 추적조사 결과 모든 공법이 탈변색, 마모, 벗겨짐 현상이 심하게 발생하여 코팅공법으로 적합하지 않으며 추후 적용하기 위해서는 연구가 필요한 것으로 나타났다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1994년도 가을 학술발표회 논문집
• /
• pp.151-156
• /
• 1994

This study is to investigate the quality of superplasticizers in domestic market. Therefore, the physico-chemical characteristics, the fluidity characteristics of fresh cement paste and mortar were tested. Also fresh and hardened properties of mortars and concretes using these superplasticizers were tested. From these results, differences of quality among superplasticizers are checked clearly in low water/cement ratio. And it is concluded that several superplasticizers have better dispersion ability than others in every tests. It has known that all samples are naphtalene sulfornate formaldehede types by the UV(ultra-violet) test.

• 수산해양교육연구
• /
• 제28권6호
• /
• pp.1602-1613
• /
• 2016

Since Ballast Water Management Convention has been adopted, Ballast Water Management Convention is not effected yet. This convention will only enter into force 12 months after its ratification by 30 states, collectively representing 35% of world merchant shipping tonnnage. Morocco, Indonesia and Ghana have ratified this convention during last 29th IMO Assembly meeting which was held in November 2015. In 2016, Belgium, Fiji, Saint Lucia and Peru have become the latest countries to ratify the convention. As of now, 51 states and 34.87% combined merchant fleets are being calculated. BWM convention will be applied to not only new ships but also, existing ships after it is effected. Thus, existing vessel will be retrofitted a Ballast Water Treatment System according to D-2 Requirement until first IOPP nenewal survey after date of entry into force of the convention. Currently, about 65 BWTSs certified by Administration will be reported to IMO, even type of BWTSs is very various. Thus, a risk of each BWTS can be existed, and this existed risk can be also effected to ship's crew safety and protection of ship's own property. Therefore, we have evaluated a risk assessment for an existing vessel retrofitting an ultra violet type Ballast Water Treatment System which is mostly developed in the world. And we described the procedure of selecting a sample vessel, consequently, bulk carrier is selected because this vessel kind is mostly charged in the world. Especially, DWT 175K size is selected. Risk Assessment is using a HAZID and HAZOP method, evaluation method is referred to IMO Document "Considerated test of the Guidelines for Formal Safety Assessment (FSA) for use in the IMO rule-marking process(MSC/Circ.1203-MEPC/Circ.392)". The Risk Assessment Section is decided to 3 Nodes, Consequently, total risks have evaluated 51 items.

• 한국신뢰성학회지:신뢰성응용연구
• /
• 제7권4호
• /
• pp.173-181
• /
• 2007

Out door exposure to daylight and weather climate conditions can cause adverse effect on the properties of automotive plastic materials. The effects of sunlight exposure, especially ultra violet (UV) radiation, can break down the chemical bonds in a polymeric material. This degradation process is called photo-degradation and ultimately leads to color changes, cracking, chalking, the loss of physical properties and deterioration of other properties. To explore the effect of sunlight exposure on the automotive materials, this study investigated photo-oxidation degree and surface property change of molding parts by analytical methods. For the further study, accelerated weathering test methods are proposed, which can correlate with out door weathering, to predict long term performance of automotive plastic materials.

• Natural Product Sciences
• /
• 제1권1호
• /
• pp.66-69
• /
• 1995

Traditional Antheraea pernyi silkworm cocoon is tawny color. The white Antheraea pernyi silkworm cocoons studied here by IR and UV are new breeds of recent breeding. We discovered that the main body of the first grade structure of silk protein in the new white is as same as the one in the traditional tawny Antheraea pernyi silkworm cocoon, yet there are small quantities of cross-linked polymer of gentisic acid and silk protein in the white silkworm cocoons. In spite of the least surviving quantity of the polymer, the white silkworm cocoons are most white and its white color is similar to white Bombyx mori silkworm cocoon.

• 한국농공학회:학술대회논문집
• /
• 한국농공학회 2002년도 학술발표회 발표논문집
• /
• pp.393-396
• /
• 2002

The objectives of the paper are to develop the infra-technologies for reclaiming the effluents from wastewater treatment plants and reusing for agriculture water. The Suwon wastewater treatment plant has been selected for wastewater reuse tests and the water quality and treatment efficiencies are investigated. Three levels of wastewater treatments that are the effluent from the plant, sand filtering, and ultra-violet treatment are applied in the pilot system. The randomized block method was applied to wastewater application to paddy rice with five treatments, three blocks, and two replica. The control was the plots with groundwater irrigation, the other treatments are to use polluted stream flow by pumping, in addition to three wastewater treatments. The block test plots and field plots have been monitored for the water quality, soil pollution, and health hazards during the crop stages.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2006년도 춘계 학술발표회 논문집(II)
• /
• pp.333-336
• /
• 2006

In general, polymer materials undergo degradation when exposed to ultraviolet radiation, which can cause dissociation of chemical bonds. FRP composites which are used in strengthening existing structure are usually adhered on the concrete surface, its mechanical properties as well as appearance such as color, surface conditions are affected by sunlight and expecially ultraviolet light. In this study, variations of tensile strength after exposure for certain period of time through accelerated exposure by Xe arc methods specified in KS F 2274 are measured in order to examine strength degradation characteristics of FRP composite. As a result of ultraviolet light test for FRP composite after accelerated exposure for 0, 500, 1000, 1500 hour, discoloration of FRP composite occurs according to the passage of time. But, few strength degradations of FRP composite are observed due to exposure of ultraviolet ray with an small variation of tensile strength.