• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.4
• /
• pp.813-820
• /
• 2009

This paper describes the realization of ubiquitous healthcare monitoring system using wearable pulse oximeter based on a wireless sensor network. In order to obtain information of oxygen saturation from a patient, a small size and low power consumption wearable pulse oximeter was designed. Information of oxygen saturation collected by wireless sensor node was transmitted wirelessly to a base-station for storage and display purposes via wireless sensor network. Wireless sensor nodes were programmed by TinyOS application to perform data acquisition and transmission. Lab VIEW server program was designed to monitor information of oxygen saturation and process the measured PPG (photo plethysmogram) signals to APG(Accelerated plethysmogram) signals by appling second order derivatives. PPG signals are simple and cost effective technique to measure blood volume change.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.6
• /
• pp.1488-1492
• /
• 2010

USN(Ubiquitous Sensor Network) is the network that widely applies for life of human being. It works out to sense, storage, process, deliver every kind of appliances and environmental information from the stucktags and sensors. And it is possible to utilize to measure and monitor about the place of environmental pollution which is difficult for human to install. It's studied constantly since it be able to compose easily more subminiature, low-power, low-cost than previous one. And also it spotlights an important field of study, graft the green IT and IT of which the environment and IT unite stragically onto the Network. This study realize a IAQM(Indoor Air Quility Management) sensing mechanism composition under the network and suggest the application of Environment monitoring system outlook to measure an Environment element.

• Convergence Security Journal
• /
• v.10 no.3
• /
• pp.43-49
• /
• 2010

With the development of information and communications technology(ICT), the concept of ubiquitous that we can communicate regardless of time and place appears. Due to the development of the technology delivering information, current society is called intellectualization society developed from informatization society. The intellectualization society is based on knowledge accumulated by processing information. The education methods are also developed into a concept of u-Learning applying the concept of ubiquitous from the concept of e-Learning using a computer. The military also points out education as a key policy. The aspect of war is changing to NCW(Network Centric Warfare) from platform centric warfare. Therefore, collecting and managing the war situations in real time is a key to controlling command. To this end, it needs to maximize individuals and groups' ability to cultivate the military with cutting-edge knowledge. Therefore, this study aims to look into methods to apply u-learning system in training and military actions according to changes in war environments and ICT.

• Journal of Korean Society for Geospatial Information Science
• /
• v.20 no.2
• /
• pp.81-91
• /
• 2012

As the recent development of the ubiquitous computing environment, u-GIS is being highlighted as the core technology of the ubiquitous computing environment, and thereby, studies on spatio-temporal data are being actively conducted. In this u-GIS environment, it is still difficult for existing mobile devices to efficiently manage the massive spatio-temporal data of u-GIS that are increasing day by day. Therefore, this paper develops a spatio-temporal query processing system for mobile devices in order to solve the problem. The system provides various spatio-temporal operators to insert/delete/update/search spatio-temporal data and supports a query optimization function that uses a spatio-temporal index for the flash memory and a spatio-temporal histogram for guaranteeing query execution speed. Lastly, by applying the spatio-temporal query processing system developed in this paper to the virtual scenario, this paper has proved that the system can be utilized in various application fields necessary to process spatio-temporal data in the mobile environment.

• Journal of the Korean Society for Precision Engineering
• /
• v.28 no.2
• /
• pp.176-184
• /
• 2011

As modern megalopolises become more complex and huge, convenience and safety of citizens are main components for a welfare state. In order to make safe society, telemetrics technology, which remotely measures the information of target system using electronic devices, is an essential component. In general, telemetrics technology consists of USN (ubiquitous sensor network) based on a wireless network, smart sensor, and SoC (system on chip). In the smart sensor technology, the following two problems should be overcome. Firstly, because it is very difficult for transducer manufacturers to develop smart sensors that support all the existing network protocols, the smart sensor must be independent of the type of networking protocols. Secondly, smart sensors should be modular so that a faulty sensor element can be replaced without replacing healthy communication element. To solve these problems, this paper investigates the feasibility of an IEEE 1451 based ZigBee smart sensor system. More specifically, a smart sensor for large network coverage has been developed using ZigBee for active telemetrics.

• Journal of the Korea Society of Computer and Information
• /
• v.16 no.2
• /
• pp.131-140
• /
• 2011

Smart packet agent is an application that is proposed to provide routing protocol and service module in ubiquitous network environment. However, it uses multi-hop broadcast, thus it causes increasing network traffic, low-speed data transmission, and the unnecessary joining nodes. In this paper, a transmit technique that uses unicast-based multi-hop to have lower network traffic and faster transmission time than the multi-hop broadcast technique. In our scheme, u-Zone Master establishes temporary routing paths by calculating moving nodes' hop-counter. Therefore, it reduces smart packet agent's network traffic and retransmission rate. Besides, this paper proposed an UDP transmission that bases on sliding window. Hence, the Stop & Wait transmission speed is improved. The results, which are taken by analyzing performance prove that the proposed scheme has better performance.

• Journal of Advanced Navigation Technology
• /
• v.11 no.2
• /
• pp.154-162
• /
• 2007

This paper verifies the performance of the wireless-signal map-matching (WSMM) method that is recently proposed to mitigate the effects of non-line-of-sight (NLOS) error in positioning under wireless terrestrial network environments. The WSMM method is the new positioning technology that estimates and compensate the NLOS errors by processing the bulks of anonymous measurements at unknown locations that are collected randomly and automatically. The WSMM method would be advantageous for various configurations of future ubiquitous sensor networks since it is based on the existing network configuration for communication and it requires no additional hardware in base stations and mobile handsets. It is shown that the application of the WSMM concept to the real CDMA pilot strength measurment message (PSMM) actually mitigates the NLOS error effects and improves overall positioning accuracy.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2007.10a
• /
• pp.453-456
• /
• 2007

In this paper, we describes a design of Wireless Mesh Network based middleware that applied into USN(Ubiquitous Sensor Networks). WMN based middleware is a technique which links data between widely distributed sensor devices and WMN for context-awareness. The use of WMN base middleware in this paper makes possible communication on insufficiently network constructed area by use of WMN. WMN based middleware also anaylze events comprehensively that originated from specific sensor device. Based on the result from analyzed data with predetermined value WMN based middleware will given an order to designated actuator devices. Middleware operate each function of sensor network management and application service separately.

• Journal of KIISE:Computing Practices and Letters
• /
• v.14 no.4
• /
• pp.352-362
• /
• 2008

In the mobile ad hoc network, network nodes are continuously capable of movement, but have battery limitations and these characteristics of MANET cause network link failure. Therefore, when performing ubiquitous services with the application of MANET, a technique is required to improve the packet transmission rates as to enable continuous packet transmission while flexibly adapting to topology changes caused by the mobility of nodes. In this paper, we are proposing PAOMDV(Possibility based AOMDV) and OLSR-ME(OLSR with Modified Energy Efficiency) which are mixed-type protocols to solve the problem for design a more efficient protocol. Especially by classifying mobile ad hoc networks as clusters, OLSR-ME protocol is implemented on communication within the clusters, while PAOMDV is used in protocols between clusters. In addition, a selection algorithm for forwarding nodes that responding packet relays in the case of increased hops was proposed for designing a more efficient protocol than existing protocols. We verified the performance of the proposed protocols through a comparative experiment with AODV, AOMDV, ZRP, and the existing protocols. We confirmed the results of the experiment revealed that the proposed protocol had the best packet transmission rate, the shortest delay between nodes, and showed better results in routing overhead.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.10 no.4
• /
• pp.142-152
• /
• 2007

Geotechnical information database, foundation of underground geographic information system in 2nd NGIS plan, had been developing by Ministry of Construction and Transportation since 2000. This database contains not only soil condition, such as depth, type and color of layer, and ground water level, but also engineering properties used for foundation design and construction, for instance, standard penetration test, compression test. But, it is difficult to apply this database for analyzing and designing geotechnical works, because report document is only offered. In this paper, we have developed web-based geospatial information system for the effective uses. First, underground cross-section model is generated by location, layer, and engineering properties of geotechnical information database at the realtime process. Second, earth volume, bearing capacity, and settlement is calculated and potentials of soft ground, liquefaction are evaluated through pre-defined empirical formula. This process is operated by web-based client. We wish to strengthen the application capacity through this system in construction planning and design works.