• Ecology and Resilient Infrastructure
• /
• v.7 no.4
• /
• pp.366-373
• /
• 2020

This study investigated habitat diversity changes by conducting weir operations at the Sejongbo site in the Geum River basin. High-resolution aerial photographs taken before and after the weir-opening operation were used for habitat analyses. We classified water and bar areas into 17 types, such as lotic habitats, including riffles, runs, and glides, and lentic habitats, including reservoirs, pools, bar-head backwaters, and bar ponds. Then, we estimated each habitat area quantitatively, calculated a habitat diversity index, and established a habitat diversity map. Our results indicated that after the weir-opening operation, lotic habitats and new types of shallow lentic habitats increased in the water area. In addition, for the bar area, bare lands without cultivation increased distinctively. Finally, we observed that the habitat diversity index drastically increased after the weir-opening operation, which could provide a relatively simple channel of diverse habitats.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.4
• /
• pp.345-352
• /
• 2021

The Republic of Korea Army (ROK Army) is trying to improve the effectiveness of education and training. On the other hand, there are many restrictions in actual training, limiting their practical education and training. Virtual reality technology is being used to overcome these limitations. Virtual reality technology is developing in various types, and the ROK Army needs to introduce a virtual reality training system for cost-effective education. The ROK Army mainly uses high-cost simulator-types that are similar to real equipment. Recently, a low-cost immersive-type virtual reality training system wearing an HMD is also being used. This study analyzed the cost education effectiveness of simulator-type and immersive-type virtual reality training systems in operation at the ROK Army air defense school. First, the research method used AHP to analyze the educational effects. Second, the cost was applied to the production cost of the virtual reality training system to analyze the cost-effectiveness of the education. The immersion-type was 3.4 times higher than the simulator-type in terms of cost effectiveness. These results can be used as basic data for analyzing the cost-effectiveness of a virtual reality training system.

• The Journal of the Korea Contents Association
• /
• v.5 no.4
• /
• pp.122-132
• /
• 2005

CVE(Collaborative Virtual Environment) is the virtually shared area where people cannot come together physically, but wish to discuss, collaborate on, or even dispute certain matters. In CVEs, in habitants are usually represented by humanoid embodiments, generally referred to as avatars. But most current graphical CVE systems fail to reflect the natural relationship between the avatar's gesture and the conversation that is taking place. More than 65% of the information exchanged during a person to person conversation is carried on the nonverbal band. Therefore, it is expected to be beneficial to provide such communication channels in CVEs in some way. To address this issue, this study proposes a scheme to represent avatar's gestures that can support the CVE users' communication. In the first level, this study classifies the non-verbal communication forms that can be applicable to avatar gesture design. In the second level, this study categorizes the body language according to the types of interaction with verbal language. And in the third level, this study examines gestures with relevant verbal expressions according to the body parts-from head to feet. One bodily gesture can be analyzed in the description of gesture representation, the meaning of gesture and the possible expressions, which can be used in gestural situation.

• The Journal of the Korea Contents Association
• /
• v.17 no.9
• /
• pp.69-76
• /
• 2017

This study evaluated the activation of the shielding wall and the components around the accelerator by using the medical linear accelerator. We performed simulations for energy values of 20 MV with the operating time ranging from day 1 to 30 years, and linear accelerator head and shielding wall concrete were also evaluated. The results showed that neutrons in large quantities were analyzed using high energy around thetarget point where photons were formed. Based on the activation analysis with these results, radioactivity increased with an increase in operation time and activated nuclides usually start saturating in10 years. Furthermore, the general types of nuclides formed owingto the activation were Co-60, W-181, 185, 187, Na-24, Ca-45, Mn-54, 56, and Fe-55, 59.

• Journal of Korean Society of Transportation
• /
• v.30 no.6
• /
• pp.93-102
• /
• 2012

The frequency and severity of traffic accidents related to signalized intersections in urban areas have been more serious than those in both arterial segments and crosswalks. Especially, traffic accidents involved with injuries and fatalities have caused by traffic signal violations within intersections. Therefore, many countries including Korea have installed the red light enforcement camera (RLE) to reduce traffic accidents associated with the traffic signal violation. Meanwhile, many methodologies have been studied in terms of safety impacts estimation of red light enforcement, which, however, cannot be easy to conduct. In this study, safety impacts was estimated for intersections of Chicago downtown area using SPF models and EB approach. As a result, for all crash types and target traffic accident types such as "angle", "rear end", "sideswipe in the same and other directions", "turn", and "head on", fatal crashes were reduced by 26% and 38%. However, RLE may increase property-demage-only-crashes by 3.23% and 1.16%, respectively.

• Journal of Biosystems Engineering
• /
• v.3 no.1
• /
• pp.47-63
• /
• 1978

This study was conducted to obtain a basic information necessary to assess present rice milling technology in Korea The profiles for milling plants was analyzed by survey work.For the private custom-work mills, which process about 80 percent of domestic rice consumption ,their actual milling test for the identical samples as used for filed mills was conducted. Two rice varieties Japonica and Tongil-type were associated with the experiments. The results are summarized as follows: 1. Analyses for private custom-work mills showed their general aspects as; about 91 percent of the mills belonged to an individual owner ship ; more than 93 percent of the mills was established earlier than 1950 ; about 80 percent of the mills was powered with electric motor; mills having less than two employees were about 75 percent; about 45 percent of the mills provided for warehouse in storing customers cereal grains. 2. The polishers installed in 1,255mills within the surveyed area (7 counties) have been supplied by 44 different domestic manufacturers ;in but about 60 percent of which was supplied by 6major manufacturers. The polishers could be classified into two categories in terms of principles of their polishing actions ;jet-pearler and friction types. About 51 percent of the mills was equipped with the former which has been recognized as giving greater milling recovery than the friction types. 3. Reason for owners of private mills to supplement new machines was due mainly to pgrading their mills to meet the requirements that established by the Government. However, about 60 percent of the mill owners intended to replace with new pearler by their own needs to meet with new high yielding varieties. 4. Processing systems of each previate rice mills surveyed could be classified into three categories, depending upon whether the systems posessed such components as precleaner and paddy separator or not. Only 36.7 percent of mills was installed with both precleanr ad paddy seperrator, 5.0 percent of mills did have neither percleaner nor paddy seperator, and rest of them equipped only one of the two. Hence,it is needed for about 63% of rice miils to be supplemented with these basic facilities to meet with the requirements for the standaized system. 5. Actual milling capacity measured at each field rice mills was shown a wide variation, having range from about 190 to 1,210 kg/hr. The percentages of mills classified according to daily milling capacity based on this hourly capacity were 24.3% for the capacity less than 3 M/T a day; 20.0% for 3-4 M/T; 15.6% for 4-5 M/T; 6.7% for 5-6 M/T; 22.3% for 6-7 M/T; and 11.0% for more than 7 M/T a day. 6. Actual amount of rice processed was about 310 M/T a year in average. About 42% of total milled rice was processed during October to Decembear, which formed a peak demand period for rice mills. The amount of rice milled during January to May was relatively small, but it had still a large amount compared to that during June to September. 7. Utilization rate of milling facility, i. e., percentage of the actual amount of milled rice to the capacity of rice mills, was about 18% on the year round average, about 41% in the peak demand season, and about 10% during June to September. Average number of operating days for mills surveyed was about 250 days a year, and about 21 days a month. 8. Moisture contents of paddy at the time of field mill tests were ranged 14.5% to 19.5% for both Japonica and Tong-i] varieties, majority of paddy grains having moisture level much higher than 1530. To aviod potential reduction of milling recovery while milling and deterioration of milled rice while storage due to these high grain mJisture contents, it may be very important for farmers holding rice to dry by an artificial drying method. 9. Milling recovery of JapJnica varieties in rice mills was 75.0% in average and it was widely ranged from 69.0% to 78.0 % according to mills. Potential increase in milJing recovery of Japonica variety with improvement of mill facilities was estimated to about 1.9%. On the other hand, milling recovery of Tong-il varieties in the field mill tests was 69.8% in average and it ranged from 62% to 77 %, which is much wider than that of Japonica varieties. It is noticed that the average milling recovery of Tong-il variety of 69.8% was much less than that of the Japonica-type. It was estimated th3.t up to about 5.0% of milling recovery for Tong-il variety could be improved by improving the present lo'.ver graded milling technology. 10. Head rice recoveries, as a factor of representing the quality of commercial goods, of Japonica and Tong-il varieties were 65.9% and 53.8% in average, and they were widely ranged from 52% to 73% and from 44% to 65% , respectively. It was assessed that head rice recovery of Japonica varieties can be improved up 3.3% and that of Tong-il varieties by 7.0% by improving mill components and systems.

• Korean Journal of Heritage: History & Science
• /
• v.52 no.4
• /
• pp.18-37
• /
• 2019

This study derived a method for establishing the chronology of cloud patterns by examining the arrangement of the treasure motifs in the cloud pattern used in the relevant pattern-decorated book covers of 89 Oegyujanggak Uigwe books, which are currently housed in the National Museum of Korea. The cloud pattern with a treasure motif was used in the covers of a total of 89 books from King Hyojong Gukjangdogam Uigwe (1659) to Sadoseja Garyedogam Uigwe (1744), spanning 86 years. First, to analyze the cloud pattern, it should be broken down into smaller parts to the extent that the different shapes of treasure motifs can be recognized. Secondly, the method of decoding the pattern is as follows: First, check whether the pattern is arranged in one or two directions from the vertex of the cloud's head, and determine the direction of the cloud tail. Then, decode the treasure motif's arrangement starting from the vertex of the cloud's head toward the direction the tail of manja is headed. Record the findings of this decoding process by categorizing them. Thirdly, as a result of the analysis, a total of 28 types of cloud patterns with treasure motifs were identified in 89 books. There were 45 types of treasure motifs used in such patterns. Finally, we have concluded that applying the method of decoding the treasure motif in the cloud pattern to portraits, excavated costumes, and various relics can be useful to establish the chronology of cloud patterns in the late Joseon period. The method suggested in this study is called 'The Reading Method of Chronology in Cloud Pattern with Treasure Motifs' (also 'Jeung-ha Cloud Pattern Reading Method').

• Korean Journal of Organic Agriculture
• /
• v.18 no.2
• /
• pp.233-244
• /
• 2010

This experiment was conducted to evaluate two different types of feed additive as an alternative for antibiotics on growth performance and feed cost in growing and finishing pigs. One additive is an herb extract, with Fenugreek (Trigonella foenum graecum) as the main component, while the other feed additive contains aminolevulinic acid (ALA). In the first experiment, 128 grower pigs were allotted to 4 different treatment groups and replicated 4 times with 8 pigs per replicate; the trial lasted for 28 days. The positive control group (PC) which is the control group supplemented with antibiotics was significantly higher (p<0.05) in growth rate (580.6 g/d) followed by the ALA group (532.0 g/d), there was no significant differences in terms of feed intake and feed efficiency. There were marginal reductions in feed costs measured as feed cost per head in ALA and HE added diet. However, the feed cost per weight gain of ALA treatment was higher than the control group (PC) supplemented with antibiotics. In the second experiment, 80 finisher pigs were allotted to 4 treatment groups and replicated 4 times with 5 pigs per replicate; the trial lasted for 70 days. The treatment group supplemented with an herb extract (HE) had a significantly higher (p<0.05) feed intake (2,415.8 g/d) compared to the other treatment groups, but there was no significant differences in terms of growth rate and feed efficiency. Feed cost per head in HE and ALA treatments were higher than PC treatment, and feed cost per weight gain of HE was higher than PC treat (p<0.05). The results from these experiments suggests that these two types of feed additives can both be used as an alternative for antibiotics without having a negative effect on the performance of the animals. And aminolevulinic acid was good in performance and production cost of grower and finisher pigs.

• The Journal of Korean Society for Radiation Therapy
• /
• v.18 no.1
• /
• pp.1-5
• /
• 2006

Purpose: IMRT quality assurance(Q.A) is consist of the absolute dosimetry using ionization chamber and relative dosimetry using the film. We have in general used 0.015 cc ionization chamber, because small size and measure the point dose. But this ionization chamber is too small to give an accurate measurement value. In this study, we have examined the degree of calculated to measured dose difference in intensity modulated radiotherapy(IMRT) based on the observed/expected ratio using various kinds of ion chambers, which were used for absolute dosimetry. Materials and Methods: we peformed the 6 cases of IMRT sliding-window method for head and neck cases. Radiation was delivered by using a Clinac 21EX unit(Varian, USA) generating a 6 MV x-ray beam, which is equipped with an integrated multileaf collimator. The dose rate for IMRT treatment is set to 300 MU/min. The ion chamber was located 5cm below the surface of phantom giving 100cm as a source-axis distance(SAD). The various types of ion chambers were used including 0.015cc(pin point type 31014, PTW. Germany), 0.125 cc(micro type 31002, PTW, Germany) and 0.6 cc(famer type 30002, PTW, Germany). The measurement point was carefully chosen to be located at low-gradient area. Results: The experimental results show that the average differences between plan value and measured value are ${\pm}0.91%$ for 0.015 cc pin point chamber, ${\pm}0.52%$ for 0.125 cc micro type chamber and ${\pm}0.76%$ for farmer type 0.6cc chamber. The 0.125 cc micro type chamber is appropriate size for dose measure in IMRT. Conclusion: IMRT Q.A is the important procedure. Based on the various types of ion chamber measurements, we have demonstrated that the dose discrepancy between calculated dose distribution and measured dose distribution for IMRT plans is dependent on the size of ion chambers. The reason is small size ionization chamber have the high signal-to-noise ratio and big size ionization chamber is not located accurate measurement point. Therefore our results suggest the 0.125 cc farmer type chamber is appropriate size for dose measure in IMRT.

• Journal of the Korean Orthopaedic Association
• /
• v.54 no.2
• /
• pp.110-119
• /
• 2019

Proximal humerus fracture can be defined as a fracture that occurs in the surgical neck or proximal part of the humerus. Despite the appropriate treatment, however, various complications and sequelae can occur, and the treatment is quite difficult often requiring surgical treatment, such as a shoulder replacement. The classification of sequelae after a proximal humerus fracture is most commonly used by Boileau and can be divided into two categories and four types. Category I is an intracapsular impacted fracture that is not accompanied by important distortions between the tuberosities and humeral head. An anatomic prosthesis can be used without greater tuberosity osteotomy. In category I, there are type 1 with cephalic collapse or necrosis with minimal tuberosity malunion and type 2 related to locked dislocation or fracture-dislocation. Category II is an extracapsular dis-impacted fracture with gross distortion between the tuberosities and the humeral head. To perform an anatomic prosthesis, a tuberosity osteotomy should be performed. In category II, there are type 3 with nonunion of the surgical neck and type 4 with severe tuberosity malunion. In type 1, non-constrained arthroplasty (NCA) without a tuberosity osteotomy should be considered as a treatment. On the other hand, reverse shoulder arthroplasty (RSA) should be considered if types 1C or 1D accompanied by valgus or varus deformity or severe fatty degeneration of the rotator cuff. In general, the results are satisfactory when NCA is performed in type 2 sequelae. On the other hand, RSA can be considered as an option when there is no bony defect of the glenoid and a defect of the rotator cuff is accompanied. In type 3, it would be effective to perform internal fixation with a bone wedge graft rather than shoulder replacement arthroplasty. Recent reports on the results of RSA are also increasing. On the other hand, recent reports suggest that good results are obtained with RSA in type 3. In type 4, RSA should be considered as a first option.