• 대한조선학회논문집
• /
• 제36권2호
• /
• pp.94-104
• /
• 1999

고장력강을 주로 사용하는 선체에서 좌굴은 중요한 설계기준이 된다. 판부재는 주로 면내강성을 갖는다. 만약 2차좌굴로 인하여 선체판의 면내강성이 저하한다면 선박전체의 종강도는 크게 저하한다. 그러므로, 판부재의 좌굴후거동과 같은 기하학적 비선형거동을 정확히 규명하여야 하는 것은 구조물 전체적으로 매우 필요하다. 이상과 같은 관점에서 본 논문에서는 에너지법을 이용하여 압축하중을 받는 단순지지판의 기하학적 비선형거동을 규명하였다. 에너지 법을 바탕으로 선체판의 탄성대변형해석을 수행하였고 분기점형좌굴과 극한점형좌굴에 대하여 규명하였다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제32권8호
• /
• pp.1170-1177
• /
• 2008

The purpose of this study is to measure and analyze the indoor thermal conditions in the spring of a korean coastal passenger ship which is 590-passenger Ro-Pax type built at 1997. Especially this study has focussed on the relations between the diffuser open ratio, which can be controlled by 12 steps, and the comfort. Followings are the results of this study. (1) The supply air volume to cabins are maximum 4.3 and 2 times more than design quantity when the diffusers in cabins are open 100% and 50%, respectively. (2) Regardless of diffuser open ratio, the supply air maintains constantly high temperature and below 10% of relative humidity through the experimental days. (3) All the cabins are not satisfied with the ASHRAE comfort criterion at the condition of 100% and 50% of diffuser open ratio, because of high temperature and low relative humidity. (4) At a low diffuser open ratio, number of cabins which satisfy the ASHRAE comfort criterion are increased. (5) Humidifying and dehumidifying, and hvac control system of each cabin must be reviewed and studied at the view of passengers to service more comfort environments.

• 해양환경안전학회:학술대회논문집
• /
• 해양환경안전학회 2003년도 춘계학술발표회
• /
• pp.125-134
• /
• 2003

이 논문에서는 새로 개정된 2000 SOLAS 규정에 근거하여 소형선박용 수동식 레이더 리프렉터(PRR-S) 설계에 관해서 기술했다. 이 연구의 설계개념은 PRR-S이 선박요동에 의해서 레이더 반사면적(RCS)이 변동하는 것을 방지하기 위하여 ‘catch rain’ 위치를 유지하도록 한 것이다. PRR-S은 원형판으로 구성한 옥타헤더럴 레이더 리프렉터와 요동방지를 위한 짐발장치로 구성하였다. 설계한 PRR-S는 전파흡수실에서 성능실험을 하였다. 실험결과, 기준으로 정한 Davis Echomaster사의 리프렉터 보다 설계한 PRR-S이 높은 RCS를 나타냈다.

• 한국해양공학회지
• /
• 제25권4호
• /
• pp.18-22
• /
• 2011

The Ranking source panel method was used to predict the flow phenomenon of a ship with a goose-neck type bulbous bow penetrating the free surface. The non-linearity of the free surface boundary condition was fully satisfied using an iterative calculation method, and the raised panel method was adopted to obtain a more stable solution at each iteration step. The panel cutting method was applied to generate a hull calculation grid at each iteration step, including the first step. At that time, the nose of the goose-neck type bulbous bow was divided by the free surface and the free surface panel was modified at each iteration step using the variable free surface panel method. Numerical calculations were performed to investigate the validity and efficiency of the applied numerical algorithm using the 3600 TEU container carrier. The computed wave resistance coefficients were compared with the experimentally achieved residual resistance coefficients.

• 한국정밀공학회지
• /
• 제14권5호
• /
• pp.42-52
• /
• 1997

Computer aided process planning and Offline programming are decisive factors in successful implementation of automated robotic production. However, conventional offline programming procedure has proven ineffective due to time-consuming teaching process for robot programming and due to inefficient system modeling. The paper presents an efficient procedure to semi-automatically generate robot job programs for ship block welding applications. In the research, the teaching positions are automatically determined by predefined rules which are functions of the type and the dimensions of the given welding section of ship block. And a sequence of robot movements and welding conditions such as welding type, welding current, welding speed, and welding torch orientation, are determined by use of Standard Program which is experimentally proved to work well for the welding wection group. Finally, a robot program for the welding section is generated automatically. Based on the algorithm, a offline automatic teaching software is developed. The paper presents also the algorithm and structure of the software.

• 한국가스학회지
• /
• 제22권3호
• /
• pp.45-52
• /
• 2018

국제해사기구(IMO)의 선박 배출가스 기준 강화로 인해 LNG 연료추진선박의 필요성이 대두되고 있으며 관련 분야에 대한 기술개발 및 실용화 촉진 연구가 활발하게 진행되고 있다. LNG 연료탱크는 운항 중 연료소비로 인하여 잔류량이 70% 미만이 될 경우 슬로싱을 고려하여야 하므로 재액화 장치를 탑재하기 어려운 중소형 LNG 연료추진선박은 Type C 형태의 압력 탱크가 적용될 가능성이 높다. 이러한 LNG 연료추진선박에 적용되는 LNG 탱크는 구조적 안전성과 더불어 LNG를 오래 보관하기 위한 단열성능이 매우 중요하다. 본 연구에서는 Type C LNG Tank에 대한 단열성능 평가 절차를 제안하였고, 실험을 통해 LNG 탱크의 열적 특성으로 인한 온도, 압력, BOG(Boil Off Gas)의 변화를 비교, 분석함으로서 BOR(Boil Off Rate) 테스트 절차에 대한 타당성과 유효성을 검증하였다.

• 한국경영과학회지
• /
• 제38권3호
• /
• pp.13-22
• /
• 2013

Queueing system with scheduled arrivals is useful in many fields where both customers' waiting time and servers' operation time (utilization) are important, and arrival time of customers is possible to be controlled. In this paper, we analyzed the operation of ship maintenance with the queueing system with scheduled arrival. Based on the model presented by Pegden and Rosenshine [8], who dealt with exponential service time, we extended the service time distributions to phase-type distribution which is able to include a wide range of real stochastic phenomena. Since most activities in the military are carried out under tight control and schedule, scheduled arrival queue has quite good applicability in this area. In this context, we applied queue with scheduled arrival to the optimal booking time decision for the ship maintenance in the navy.

• 전기전자학회논문지
• /
• 제24권2호
• /
• pp.453-460
• /
• 2020

본 논문에서는 함정의 합내통신, 함외통신, 방송, 전화 등의 통합통신 안테나 중 함외통신용 UHF 대역 통합통신 안테나를 통합마스트에 탑재 가능한 평면형으로 설계했다. 제안된 통합마스트 탑재용 안테나는 해군의 한국형차기구축함(KDDX)에 적용되는 통합통신용 안테나로 작전능력, 생존성 강화와 운용성과 정비성의 향상 등 '복합경사' 구조를 포함하는 최적화된 형태의 통합통신용 안테나이다. 기존 회전식 레이더와 다수의 모노폴 형태의 통신용 안테나를 마스트 외관에 불규칙한 형태로 부착된 형태에서 평판형 통합통신용 안테나를 포함하는 통합 마스트 형상으로 변경하여 레이더 반사 면적 지수(RCS)를 크게 낮추며 해외제품 대비 고이득 광대역 안테나를 개발목표로 한다.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 1997년도 춘계학술발표회 논문집
• /
• pp.5-16
• /
• 1997

This paper presented a method of evaluting navigational safety of a ship by means of the integrated seakeeping performance index(ISPI). The ISPI is defined by measuring only any one factor through the medium of relative dangerousness of the other factors for evaluating seakeeping performance. This evaluation method can be applied to the ships for any types and loading conditions. In developing the practical evaluation system of navigational safety. it is expected to be useful for developing the optimum type of ship by applying at the initial design phase.

• 한국항해학회지
• /
• 제21권2호
• /
• pp.1-9
• /
• 1997

This paper presented a method of evaluating navigational safety of a ship by means fo the integrted seakeeping performance index(ISPI). The ISPI is defined by measuring only any one factor through the medium of relative dangerousness of the other factors for evaluating seakeeping performance. This evaluation method can be applied to the ships for any types and loading conditions. In devloping the practical evaluation system of navigational safety, it is expected to be useful to solve the difficulties in measuring factors by sensors. The results are also useful for devloping the optimum type of ship by applying at the initial design phase.